Выходит 12 номеров в год
ISSN Печать: 1044-5110
ISSN Онлайн: 1936-2684
Indexed in
SUBSONIC EFFERVESCENT ATOMIZATION: A THEORETICAL APPROACH
Краткое описание
Spray formation by bi-component liquid flashing through a special-design injector has been studied. Special attention has been drawn to the processes inside the expansion chamber. The relevant processes, which include the pressure drop at the inlet orifice, nuclei formation, bubble growth inside the expansion chamber, and the pressure drop at the discharge orifice, have been analyzed by using a one-dimensional model approach. While the one-dimensional assumption is problematic, it enables simple analysis and yet provides realistic quantitative results.
It is postulated that in a well-designed expansion chamber, a prespecified void fraction has to be attained at the end of the expansion chamber. The latter is designed to yield this void fraction, subject to the thermodynamic conditions of the entering mixture and orifices geometries. The optimal volume of the expansion chamber is found to be...
It follows that the optimal volume of the expansion chamber depends strongly on the superheat degree, flow rate, and the cross-section area ratio between the inlet and discharge orifices.
-
Walzel Peter, Spraying and Atomizing of Liquids, in Ullmann's Encyclopedia of Industrial Chemistry, 2010. Crossref
-
Sher Eran, Bar-Kohany Tali, Rashkovan Alexander, Flash-boiling atomization, Progress in Energy and Combustion Science, 34, 4, 2008. Crossref
-
Levy M., Levy Y., Sher E., Spray structure as generated under homogeneous flash boiling nucleation regime, Applied Thermal Engineering, 73, 1, 2014. Crossref
-
Lyras Konstantinos, Dembele Siaka, Schmidt David P., Wen Jennifer X., Numerical simulation of subcooled and superheated jets under thermodynamic non-equilibrium, International Journal of Multiphase Flow, 102, 2018. Crossref
-
Wang Xin-Sheng, Chen Bin, Zhou Zhi-Fu, Atomization and surface heat transfer characteristics of cryogen spray cooling with expansion-chambered nozzles, International Journal of Heat and Mass Transfer, 121, 2018. Crossref
-
Walzel Peter, Spraying and Atomizing of Liquids, in Ullmann's Encyclopedia of Industrial Chemistry, 2019. Crossref
-
Bhatia Bharat, De Ashoke, Flash Boiling in Sprays: Recent Developments and Modeling, Journal of the Indian Institute of Science, 99, 1, 2019. Crossref
-
Miao Junjie, Fan Yuxin, Wu Weiqiu, Characteristics of flash boiling spray of aviation kerosene in the twin-orifice nozzle, Fuel, 297, 2021. Crossref
-
Miao Junjie, Fan Yuxin, Wu Weiqiu, Effects of nozzle configuration on flash boiling fuel sprays of twin-orifice nozzle with aviation kerosene, International Journal of Heat and Mass Transfer, 174, 2021. Crossref