Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Atomization and Sprays
Импакт фактор: 1.262 5-летний Импакт фактор: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN Печать: 1044-5110
ISSN Онлайн: 1936-2684

Выпуски:
Том 29, 2019 Том 28, 2018 Том 27, 2017 Том 26, 2016 Том 25, 2015 Том 24, 2014 Том 23, 2013 Том 22, 2012 Том 21, 2011 Том 20, 2010 Том 19, 2009 Том 18, 2008 Том 17, 2007 Том 16, 2006 Том 15, 2005 Том 14, 2004 Том 13, 2003 Том 12, 2002 Том 11, 2001 Том 10, 2000 Том 9, 1999 Том 8, 1998 Том 7, 1997 Том 6, 1996 Том 5, 1995 Том 4, 1994 Том 3, 1993 Том 2, 1992 Том 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.v19.i11.30
pages 1031-1044

X-RAY RADIOGRAPHY MEASUREMENTS OF DIESEL SPRAY STRUCTURE AT ENGINE-LIKE AMBIENT DENSITY

Alan L. Kastengren
Energy Systems Division, X-ray Science Division, Advanced Photon Source, Argonne National Laboratory, Argonne, IL 60439, USA
Christopher F. Powell
Energy Systems Division, Argonne National Laboratory, Lemont, Illinois 60439, USA
Yujie Wang
Physics Department, Shanghai Jiaotong University, Shanghai, China
Kyoung-Su Im
Livermore Software Technology Corporation, Livermore, CA, USA
Jin Wang
Advanced Photon Source, Argonne National Laboratory, Argonne, IL, USA

Краткое описание

X-ray radiography has been used to examine the dependence of the near-nozzle fuel distribution of diesel sprays on injection pressure and ambient density. Measurements of sprays from two nozzles with different geometries, one extensively hydroground and the other minimally hydroground, have been obtained to show how nozzles of different geometries respond to changes in ambient density and rail pressure. The spray penetration near the nozzle demonstrates little dependence on ambient density, but a strong dependence on rail pressure. Comparison of these results with standard correlations in the literature show that in the near-nozzle region examined in this study, the penetration is expected to show little dependence on ambient density. The spray width becomes much larger for both nozzles as the ambient density increases. Rescaling the axial position by the square root of the density ratio between the fuel and the ambient gas accounts for the trends in spray width with ambient density for both nozzles. The radiography data can also be examined to determine the relative trends in the steady-state, mass-averaged axial velocity of the spray. The velocity decays more rapidly with axial distance as the ambient density increases. Rescaling the axial position also accounts for the trend of velocity decay with ambient pressure.


Articles with similar content:

COMPUTED AND MEASURED FUEL VAPOR DISTRIBUTION IN A DIESEL SPRAY
Atomization and Sprays, Vol.20, 2010, issue 3
Lyle M. Pickett, John P. Abraham
ASSESSMENT OF DROPLET BREAKUP MODELS IN HIGH-SPEED CROSS-FLOW
Atomization and Sprays, Vol.27, 2017, issue 1
Debasis Chakraborty, P. Manna, Anand Bhandarkar
ASSESSMENT OF ATOMIZATION MODELS FOR DIESEL ENGINE SIMULATIONS
Atomization and Sprays, Vol.19, 2009, issue 9
S. Som, Suresh Aggarwal
CHARACTERIZATION OF n-BUTANOL AND GASOLINE SPRAY FROM A MULTIHOLE INJECTOR USING PHASE DOPPLER ANEMOMETRY
Atomization and Sprays, Vol.25, 2015, issue 12
Simona Silvia Merola, S. Nava Igual, Luca Marchitto, C. Tornatore, G. Valentino
Effects of Fuel Viscosity and Ambient Temperature on Spray Characteristics from Multi-Hole Nozzle Injectors
International Journal of Fluid Mechanics Research, Vol.24, 1997, issue 1-3
C. B. Warrick, J. M. Kozma, T. F. Su, Patrick V. Farrell