Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Atomization and Sprays
Импакт фактор: 1.262 5-летний Импакт фактор: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN Печать: 1044-5110
ISSN Онлайн: 1936-2684

Выпуски:
Том 29, 2019 Том 28, 2018 Том 27, 2017 Том 26, 2016 Том 25, 2015 Том 24, 2014 Том 23, 2013 Том 22, 2012 Том 21, 2011 Том 20, 2010 Том 19, 2009 Том 18, 2008 Том 17, 2007 Том 16, 2006 Том 15, 2005 Том 14, 2004 Том 13, 2003 Том 12, 2002 Том 11, 2001 Том 10, 2000 Том 9, 1999 Том 8, 1998 Том 7, 1997 Том 6, 1996 Том 5, 1995 Том 4, 1994 Том 3, 1993 Том 2, 1992 Том 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.v11.i4.90
pages 453-470

ON THE PREDICTION AND STRUCTURES OF WIDE-ANGLE FULL-CONE LIQUID SPRAYS

S. J. Walmsley
Atomization and Sprays Research Group, Department of Mechanical Engineering, University of anchester Institute of Science and Technology, Manchester, U.K.

Краткое описание

This article describes the modification, use, and validation of a three-dimensional computational fluid dynamics (CFD) code applied to model solid-cone sprays produced by pressure-swirl atomizers. The finite-volume code used is a three-dimensional, orthogonal, two-phase, Lagrangian-tracking, transient code. It contains submodels for the secondary breakup of droplets and for collisions. The effect of the chosen initial drop size distribution on the predicted fully developed spray characteristics is investigated. The optimum initial conditions are determined by making comparisons with published experimental data. It is found that to obtain a realistic model, a range of drop sizes needs to be introduced. This range can be represented by a truncated Rosin-Rammler distribution discretized into 20 size classes. Each initial distribution can be characterized by the maximum, minimum, and Rosin-Rammler mean diameters. Relations are developed for these diameters as a function of the operating parameters. This work demonstrates that, to model a solid-cone spray accurately, the microscopic processes occurring within it, such as secondary breakup, need to be accounted for.


Articles with similar content:

MODELING THE PRIMARY BREAKUP OF HIGH-SPEED JETS
Atomization and Sprays, Vol.14, 2004, issue 1
Rolf D. Reitz
A CONSERVATIVE FRAMEWORK FOR PRIMARY ATOMIZATION COMPUTATION AND APPLICATION TO THE STUDY OF NOZZLE AND DENSITY RATIO EFFECTS
Atomization and Sprays, Vol.23, 2013, issue 12
Vincent Le Chenadec, Heinz Pitsch
THREE-DIMENSIONAL SIMULATION OF EFFERVESCENT ATOMIZATION SPRAY
Atomization and Sprays, Vol.19, 2009, issue 1
Jianzhong Lin, Ze-Fei Zhu, Hong-Bing Xiong
THE EFFECTS OF PREFILMING LENGTH AND FEED RATE ON COMPRESSIBLE FLOW IN A SELF-PULSATING INJECTOR
Atomization and Sprays, Vol.27, 2017, issue 11
Wayne Strasser, Francine Battaglia
DROPLET SIZE DISTRIBUTION IN SWIRL ATOMIZERS
Atomization and Sprays, Vol.12, 2002, issue 5&6
Yuriy Khavkin