Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Atomization and Sprays
Импакт фактор: 1.262 5-летний Импакт фактор: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN Печать: 1044-5110
ISSN Онлайн: 1936-2684

Выпуски:
Том 29, 2019 Том 28, 2018 Том 27, 2017 Том 26, 2016 Том 25, 2015 Том 24, 2014 Том 23, 2013 Том 22, 2012 Том 21, 2011 Том 20, 2010 Том 19, 2009 Том 18, 2008 Том 17, 2007 Том 16, 2006 Том 15, 2005 Том 14, 2004 Том 13, 2003 Том 12, 2002 Том 11, 2001 Том 10, 2000 Том 9, 1999 Том 8, 1998 Том 7, 1997 Том 6, 1996 Том 5, 1995 Том 4, 1994 Том 3, 1993 Том 2, 1992 Том 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.2014007885
pages 281-302

LARGE EDDY SIMULATION OF SINGLE DROPLET AND LIQUID JET PRIMARY BREAKUP USING A COUPLED LEVEL SET/VOLUME OF FLUID METHOD

Feng Xiao
Science and Technology on Scramjet Laboratory, National University of Defense Technology, Changsha, HuNan, 410073, China
M. Dianat
Department of Aeronautical and Automotive Engineering, Loughborough University, Leicestershire, United Kingdom
James J. McGuirk
Department of Aeronautical and Automotive Engineering, Loughborough University, Leicestershire, United Kingdom

Краткое описание

Numerical modeling of primary breakup of a liquid jet under the influence of strong aerodynamic and turbulence effects is very challenging, especially for high liquid/gas density ratio O (1000). A robust algorithm for large eddy simulation (LES) of two-phase flows is presented here. A coupled level set and volume of fluid (CLSVOF) technique is applied as the interface-tracking method in order to combine the advantages of level set and volume of fluid methods. The governing equations are discretized by introducing an extrapolated liquid velocity to minimize the interface momentum error. Since experimental studies on breakup of a single liquid drop in uniform gas flow are well documented, this test case is first used to validate the developed two-phase flow LES method. It is shown that the predicted drop breakup agrees quantitatively well with experiments for different Weber numbers. The solver is then applied to simulate primary breakup of liquid jets, which are more relevant to industrial applications. By simulating single round water jet atomization in high-speed coaxial airflow, it is found that the predicted liquid core breakup lengths at different air/liquid velocities agree closely with measured data, but only when appropriate turbulent inflow conditions are specified.


Articles with similar content:

HIGH-FIDELITY SIMULATION OF FUEL ATOMIZATION IN A REALISTIC SWIRLING FLOW INJECTOR
Atomization and Sprays, Vol.23, 2013, issue 11
Marios Soteriou, Xiaoyi Li
TOWARD USING DIRECT NUMERICAL SIMULATION TO IMPROVE PRIMARY BREAK-UP MODELING
Atomization and Sprays, Vol.23, 2013, issue 11
Zakaria Bouali, Francois-Xavier Demoulin, P. Desjonqueres, Bernard Duret, Thibaut Menard, Julien Reveillon
DEVELOPMENT OF A COMBINED VOF-LPT METHOD TO SIMULATE TWO-PHASE FLOWS IN VARIOUS REGIMES
TSFP DIGITAL LIBRARY ONLINE, Vol.7, 2011, issue
Robert-Zoltan Szasz, Holger Grosshans, Laszlo Fuchs
DIRECT NUMERICAL SIMULATION OF THE PRIMARY BREAKUP OF A SPATIALLY DEVELOPING LIQUID JET
TSFP DIGITAL LIBRARY ONLINE, Vol.3, 2003, issue
Johannes Janicka, Amsini Sadiki, Markus Klein
Spray Break-Up Process of Diesel Fuel Investigated Close to the Nozzle
International Journal of Fluid Mechanics Research, Vol.24, 1997, issue 1-3
Alfred Leipertz, K.-U. Munch, A. Fath