Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Atomization and Sprays
Импакт фактор: 1.737 5-летний Импакт фактор: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 2.2

ISSN Печать: 1044-5110
ISSN Онлайн: 1936-2684

Выпуски:
Том 30, 2020 Том 29, 2019 Том 28, 2018 Том 27, 2017 Том 26, 2016 Том 25, 2015 Том 24, 2014 Том 23, 2013 Том 22, 2012 Том 21, 2011 Том 20, 2010 Том 19, 2009 Том 18, 2008 Том 17, 2007 Том 16, 2006 Том 15, 2005 Том 14, 2004 Том 13, 2003 Том 12, 2002 Том 11, 2001 Том 10, 2000 Том 9, 1999 Том 8, 1998 Том 7, 1997 Том 6, 1996 Том 5, 1995 Том 4, 1994 Том 3, 1993 Том 2, 1992 Том 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.v7.i1.60
pages 115-122

SPRAY SYNTHESIS OF SUPERPLASTIC MATERIALS FOR NEAR-NET-SHAPE MANUFACTURING

Yue Wu
Department of Chemical Engineering and Materials Science, University of California, Irvine, СА 92717
Enrique J. Lavernia
Department of Chemical Engineering and Materials Science, University of California, Irvine, California, 92717, USA

Краткое описание

Spray deposition was used to synthesize 5083 Al alloy with N2 and N2 + O2 mixture as atomization gases. The starting 5083 Al was alloyed with Zr during spray deposition in order to refine grain size. It was noted that the grains that were present in as-spray deposited 5083 Al were equiaxed. In the inert gas spray deposited alloys, grain size decreased with increasing Zr content. Reactive spray deposition using N2 + O2 mixture, however, led to an increase in average grain size which is considered a result of release of enthalpy during oxidation reaction of matrix alloys. The spray deposited alloys were thermomechanically processed using extrusion and multiple-pass warm rolling to further reduce grain size. Superplasticity was observed in the 500−550 °C temperature range for strain rates between 3 × 10−5 and 3 × 10−3 s−1. A maximum elongation of 465% was noted at 550% and 3 × 10−5 s−1. The spray deposited alloys thermomechanically processed by direct rolling, exhibited superplasticity in the same temperature and strain rate ranges as those for the extruded and rolled materials. The superplastic elongation of the spray formed and rolled material was relatively low, being in the range of 180 ∼ 260%.


Articles with similar content:

MONOMETALLIC AND BIMETALLIC PT-BASED NANOPARTICLES AS TETRAMETHYLTETRAZENE (TMTZ) DECOMPOSITION CATALYSTS
International Journal of Energetic Materials and Chemical Propulsion, Vol.17, 2018, issue 3
Nolwenn Mayet, Romain Beauchet, Kamal Farhat, Yann Batonneau, Charles J. Kappenstein
INFLUENCE OF MODIFYING ADDITIVES ON THE PHASE STABILITY AND RESISTANCE TO OXIDATION OF COATINGS BASED ON STABILIZED ZIRCONIUM DIOXIDE AND A CARBON−CARBON COMPOSITE MATERIAL
Nanoscience and Technology: An International Journal, Vol.7, 2016, issue 4
D. Yu. Sinitsyn, V. N. Anikin, S. A. Eremin, B. V. Ryabenko
PARAMETERS OPTIMIZATION FOR PLASMA SPRAYING AND PULSED PLASMA TREATMENT OF SURFACE LAYERS OF GAS-THERMAL COMPOSITE COATINGS BASED ON MULTIFUNCTIONAL OXIDE CERAMICS
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.18, 2014, issue 1-2
Vjatcheslav V. Okovity, V. A. Okovity, A. I. Shevtsov, Valiantsin M. Astashynski, E. A. Kostyukevich
DRY SO2 REMOVAL AT LOW TEMPERATURE USING CALCIUM-BASED SORBENTS
Energy and Environment, 1995, Vol.0, 1995, issue
Zhongyang Luo, Kefa Cen, JinSong Zhou, XuanTian Li, Xiang Gao, Mingjiang Ni, YaFei Chen
DEPOSITION OF YTTRIA-STABILISED ZIRCONIA COATINGS USING LIQUID PRECURSORS
Progress in Plasma Processing of Materials, 2001, Vol.0, 2001, issue
E. Bouyer, J. Verleger, Matthias Muller, Gunter Lins , David W. Branston, M. von Bradke