Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Atomization and Sprays
Импакт фактор: 1.737 5-летний Импакт фактор: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 2.2

ISSN Печать: 1044-5110
ISSN Онлайн: 1936-2684

Выпуски:
Том 30, 2020 Том 29, 2019 Том 28, 2018 Том 27, 2017 Том 26, 2016 Том 25, 2015 Том 24, 2014 Том 23, 2013 Том 22, 2012 Том 21, 2011 Том 20, 2010 Том 19, 2009 Том 18, 2008 Том 17, 2007 Том 16, 2006 Том 15, 2005 Том 14, 2004 Том 13, 2003 Том 12, 2002 Том 11, 2001 Том 10, 2000 Том 9, 1999 Том 8, 1998 Том 7, 1997 Том 6, 1996 Том 5, 1995 Том 4, 1994 Том 3, 1993 Том 2, 1992 Том 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.2015012108
pages 135-162

EFFECT OF SINGLE- AND MULTI-HOLE BUBBLE BREAKERS ON THE EFFERVESCENT ATOMIZATION PROCESS

Mona Hassanzadeh Jobehdar
Department of Mechanical and Materials Engineering, University of Western Ontario, London, Ontario, Canada
Kamran Siddiqui
Department of Mechanical and Materials Engineering, University of Western Ontario, London, Ontario, Canada
Aly H. Gadallah
Department of Mechanical and Materials Engineering, University of Western Ontario, London, Ontario, Canada; Department of Mechanical and Power Engineering, Tanta University, Tanta, Egypt
Wajid A. Chishty
Institute for Aerospace Research National Research Council Canada, Ottawa, Ontario, Canada

Краткое описание

Effervescent atomization technique is used in many industrial applications such as gas turbines, internal combustion engines, furnaces and burners, and pharmaceutical sprays. The present study is focused on investigating the influence of a new type of bubble breaker on the two-phase flows inside and outside an effervescent atomizer. Different configurations (size and number of holes) of the new bubble breaker were considered over a range of gas to liquid flow rates ratios (GLRs) from 0.001 to 0.022. High-speed imaging was used to visualize and quantify bubble and spray characteristics. The results showed that the two-phase flow regime and bubbles' size inside the effervescent atomizer, and the spray droplets' size and velocity outside the atomizer are strongly influenced by the bubble breaker. The results demonstrated that the bubble breaker effectively fragments large bubbles into smaller ones. Furthermore, the results illustrate that the diameter and numbers of holes of the bubble breaker affect the bubble size inside the mixing zone as well as the droplet size and velocity.


Articles with similar content:

EFFECT OF ATOMIZER INTERNAL GEOMETRY ON THE INTERNAL AND EXTERNAL TWO-PHASE FLOW IN EFFERVESCENT ATOMIZATION
Atomization and Sprays, Vol.27, 2017, issue 2
Aly H. Gadallah, Kamran Siddiqui, Mona Hassanzadeh Jobehdar, Wajid A. Chishty
LARGE EDDY SIMULATION OF SINGLE DROPLET AND LIQUID JET PRIMARY BREAKUP USING A COUPLED LEVEL SET/VOLUME OF FLUID METHOD
Atomization and Sprays, Vol.24, 2014, issue 4
James J. McGuirk, Feng Xiao, M. Dianat
AN EXPERIMENTAL INVESTIGATION OF THE FLASH ATOMIZATION MECHANISM
Atomization and Sprays, Vol.4, 1994, issue 2
Byung Suh Park, Sang Yong Lee
SPRAY CHARACTERISTICS OF A GROUP-HOLE NOZZLE FOR DIRECT-INJECTION DIESEL ENGINES
Atomization and Sprays, Vol.16, 2006, issue 1
Shinsuke Nomura, Keiya Nishida, Tomoaki Ito, Yuyin Zhang
PENETRATION OF AERATED SUSPENSION SPRAY IN A GASEOUS CROSSFLOW
Atomization and Sprays, Vol.28, 2018, issue 2
Amr Saleh, Ali Dolatabadi, Ghobad Amini