Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Atomization and Sprays
Импакт фактор: 1.262 5-летний Импакт фактор: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN Печать: 1044-5110
ISSN Онлайн: 1936-2684

Выпуски:
Том 29, 2019 Том 28, 2018 Том 27, 2017 Том 26, 2016 Том 25, 2015 Том 24, 2014 Том 23, 2013 Том 22, 2012 Том 21, 2011 Том 20, 2010 Том 19, 2009 Том 18, 2008 Том 17, 2007 Том 16, 2006 Том 15, 2005 Том 14, 2004 Том 13, 2003 Том 12, 2002 Том 11, 2001 Том 10, 2000 Том 9, 1999 Том 8, 1998 Том 7, 1997 Том 6, 1996 Том 5, 1995 Том 4, 1994 Том 3, 1993 Том 2, 1992 Том 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.2015011356
pages 93-119

VISUALIZATION OF CAVITATING FLOW WITHIN A HIGH-ASPECT-RATIO SLOT INJECTOR

Andrew S. Thompson
Maurice J. Zucrow Laboratories, Department of Aeronautics and Astronautics, Purdue University, West Lafayette, Indiana 47906, USA
Stephen D. Heister
Maurice J. Zucrow Laboratories, Department of Aeronautics and Astronautics, Purdue University, West Lafayette, Indiana, USA

Краткое описание

Cavitation inside the passages of an injector can result in decreased discharge characteristics. This paper describes a flow visualization study to characterize cavitation structures in the flow of methanol through a series of high aspect ratio slot orifice injectors of varying L/DH. Cavitation structures were observed to evolve through a series of regimes corresponding to increased pressure drop across the injector. Specifically, the cavitation region lengthens as pressure drop increases. The lengthening cavitation results in a decrease in discharge coefficient that follows a predictable pattern. As the cavitaton lengthens to occupy the length of the injector and hydraulic flip occurs, the discharge coefficient drops suddenly away from what is predicted. In the cavitating injector other flow structures are observed and described. Also, high speed videos are analyzed for frequency content through the cavitation region. Frequency content appears to be concentrated below 1 kHz, with the majority of content existing below 200 Hz.

Ключевые слова: cavitation, discharge coefficient, slot injector

Articles with similar content:

Dynamic Primary Atomization Characteristics in an Airblast Atomizer, High Pressure Conditions
Atomization and Sprays, Vol.21, 2011, issue 1
Vital Gutierrez Fernandez, P. Berthoumieu, G. Lavergne
Correlating Flow Pattern with Force Coefficients in Air Flow past a Tandem Unit of Three Circular Cylinders
International Journal of Fluid Mechanics Research, Vol.40, 2013, issue 3
A. R. Vasel-Be-Hagh, David Ting, Rupp Carriveau
Characterization of Cavitation Flow in a Simple Hole Nozzle
International Journal of Fluid Mechanics Research, Vol.24, 1997, issue 1-3
Keiya Nishida, Steven L. Ceccio, Hiroyuki Hiroyasu, Dennis N. Assanis, N. Tamaki
INVESTIGATION OF THE LARGE SCALE STRUCTURES IN THE TURBULENT MIXING LAYER DOWNSTREAM A THICK PLATE
TSFP DIGITAL LIBRARY ONLINE, Vol.3, 2003, issue
Laurent Perret, Jean-Paul Bonnet, Joel Delville
VISUALIZATION INVESTIGATIONS OF FLOW REGIMES IN DIFFERENT SIZES OF DIESEL INJECTOR NOZZLES AND THEIR EFFECTS ON SPRAY
Atomization and Sprays, Vol.28, 2018, issue 6
Zhixia He, Zhou Chen, Xiongbo Duan, Xianyin Leng, Yu Jin, Genmiao Guo