Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Atomization and Sprays
Импакт фактор: 1.737 5-летний Импакт фактор: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 2.2

ISSN Печать: 1044-5110
ISSN Онлайн: 1936-2684

Выпуски:
Том 30, 2020 Том 29, 2019 Том 28, 2018 Том 27, 2017 Том 26, 2016 Том 25, 2015 Том 24, 2014 Том 23, 2013 Том 22, 2012 Том 21, 2011 Том 20, 2010 Том 19, 2009 Том 18, 2008 Том 17, 2007 Том 16, 2006 Том 15, 2005 Том 14, 2004 Том 13, 2003 Том 12, 2002 Том 11, 2001 Том 10, 2000 Том 9, 1999 Том 8, 1998 Том 7, 1997 Том 6, 1996 Том 5, 1995 Том 4, 1994 Том 3, 1993 Том 2, 1992 Том 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.v15.i6.30
pages 661-686

CONTROL OF SPRAY FORMATION BY VIBRATIONAL EXCITATION OF FLAT-FAN AND CONICAL LIQUID SHEETS

Günter Brenn
Institute of Fluid Mechanics and Heat Transfer, Graz University of Technology, 8010 Graz, Austria
Zeljko Prebeg
Institute of Chemical and Bioengineering, LSTM, University of Erlangen-Nurnberg, 91058 Erlangen, Germany
Dirk Rensink
Institute of Chemical and Bioengineering, LSTM, University of Erlangen-Nurnberg, 91058 Erlangen, Germany
Alexander L. Yarin
Faculty of Mechanical Engineering, Technion-Israel Institute of Technology, Haifa 32000, Israel

Краткое описание

In the present work, we develop a technique for controlling spray formation by vibrational excitation of liquid sheets. The sheets are formed by commercial prefilming pressure atomizers or by a specially designed liquid sheet generator. The excitation controls the drop formation such that narrow drop size spectra are produced. For realizing the technique, a vibrator for moving the atomizers was developed. Investigations with flat-fan atomizers show that, for sufficiently small sheet Weber number, regular-shaped waves on the sheets are formed by the excitation, which results in the formation of regular-shaped ligaments. The latter disintegrate into droplets by the Rayleigh mechanism. The small Weber number keeps the influence of the Kelvin-Helmholtz instability of the sheet (which would disturb the regularity of the drop formation) small. For investigating the controlled breakup of conical sheets, a conical sheet generator was developed, which allows the sheet thickness at the orifice to be varied. Investigations of open water bells show that the excitation may force the formation of regular sprays for this sheet geometry, also. The breakup of the conical sheets is also controlled by preshaping of the sheets due to the nozzle vibrations. For both sheet geometries, our work quantifies the achievable drop sizes and operation windows of the influencing parameters in nondimensional form, inside which the technique can be applied.


Articles with similar content:

EFFECT OF TRANSVERSE ACOUSTIC FORCING ON THE CHARACTERISTICS OF IMPINGING JET ATOMIZATION
Atomization and Sprays, Vol.29, 2019, issue 1
Hrishikesh Gadgil, Sandip Dighe
LIQUID FILM ATOMIZATION
Atomization and Sprays, Vol.19, 2009, issue 6
D. R. Woods, Sung P. Lin
A Nonlinear Model for the Atomization of Attenuating Liquid Sheets
International Journal of Fluid Mechanics Research, Vol.34, 2007, issue 3
D. Sree, T. R. McKinney, E. A. Ibrahim
MECHANISMS OF AIR-ASSISTED LIQUID ATOMIZATION
Atomization and Sprays, Vol.3, 1993, issue 1
Rolf D. Reitz, A. B. Liu
DROPLET STREAM DYNAMICS AT HIGH AMBIENT PRESSURE
Atomization and Sprays, Vol.6, 1996, issue 4
C. S. Connon, Derek Dunn-Rankin