Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Atomization and Sprays
Импакт фактор: 1.262 5-летний Импакт фактор: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN Печать: 1044-5110
ISSN Онлайн: 1936-2684

Выпуски:
Том 29, 2019 Том 28, 2018 Том 27, 2017 Том 26, 2016 Том 25, 2015 Том 24, 2014 Том 23, 2013 Том 22, 2012 Том 21, 2011 Том 20, 2010 Том 19, 2009 Том 18, 2008 Том 17, 2007 Том 16, 2006 Том 15, 2005 Том 14, 2004 Том 13, 2003 Том 12, 2002 Том 11, 2001 Том 10, 2000 Том 9, 1999 Том 8, 1998 Том 7, 1997 Том 6, 1996 Том 5, 1995 Том 4, 1994 Том 3, 1993 Том 2, 1992 Том 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.2012004051
pages 753-774

ANALYSIS OF DIESEL SPRAY ATOMIZATION BY MEANS OF A NEAR-NOZZLE FIELD VISUALIZATION TECHNIQUE

Raul Payri
CMT–Motores Térmicos, Universitat Politècnica de València, Edificio 6D, Valencia, 46022, Spain
https://orcid.org/0000-0001-7428-5510
Javier Salvador
CMT-Motores Termicos. Universitat Politecnica de Valencia, Camino de Vera s/n, E-46022, Spain
Jaime Gimeno
CMT-Motores Tèrmicos, Universitat Politècnica de València, València, Spain
J. De la Morena
CMT-Motores Termicos. Universitat Politecnica de Valencia, Camino de Vera s/n, E-46022, Spain

Краткое описание

In this paper, a high-resolution visualization technique has been used in order to characterize Diesel spray structure in the near-nozzle field. For this purpose, three conical nozzles with different diameters have been used to relate nozzle geometry and spray behavior in non-cavitating conditions. As a first step, geometrical and hydraulic characterization of the nozzles has been performed. The analysis of the images obtained has shown that spray aperture varied significantly during the first millimeters of the spray, until reaching to the stabilized value of spray cone angle, which is the one usually characterized by other visualization techniques. Furthermore, the structure of the liquid−gas interface presented an oscillatory behavior, which is related to primary atomization process. These oscillations have been quantified and statistically correlated with nozzle geometry and operating conditions by means of three different non-dimensional numbers: Reynolds number, air/fuel density ratio, and Ohnesorge number.

Ключевые слова: diesel spray, primary atomization, near-nozzle, injection

Articles with similar content:

COMPARISON AND CROSS-VALIDATION OF OPTICAL TECHNIQUES IN DIFFERENT SWIRL SPRAY REGIMES
Atomization and Sprays, Vol.23, 2013, issue 8
Ranganathan Kumar, Joshua Lee, Saptarshi Basu
SPRAY ATOMIZATION CHARACTERISTICS OF A LOW PRESSURE ROTARY INJECTOR
Atomization and Sprays, Vol.29, 2019, issue 6
Kushal Ghate, Thirumalachari Sundararajan, Shraddha Sharma
Characterization of Direct-Injection Gasoline Sprays under Different Ambient and Fuel Injection Conditions
International Journal of Fluid Mechanics Research, Vol.24, 1997, issue 4-6
J.-H. Yoo, Fu-Quan Zhao, K.-S. Lee, Ming Chia Lai, Y. Liu
DEVELOPMENT OF MICRO-DIESEL INJECTOR NOZZLES VIA MEMS TECHNOLOGY AND EFFECTS ON SPRAY CHARACTERISTICS
Atomization and Sprays, Vol.13, 2003, issue 5&6
Michael L. Corradini, Seunghyun Baik, James P Blanchard
MEASUREMENT OF BREAKUP LENGTH OF CYLINDRICAL LIQUID JETS. APPLICATION TO LOW-PRESSURE CAR INJECTOR
Atomization and Sprays, Vol.11, 2001, issue 3
Christophe Dumouchel