Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Atomization and Sprays
Импакт фактор: 1.262 5-летний Импакт фактор: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN Печать: 1044-5110
ISSN Онлайн: 1936-2684

Выпуски:
Том 29, 2019 Том 28, 2018 Том 27, 2017 Том 26, 2016 Том 25, 2015 Том 24, 2014 Том 23, 2013 Том 22, 2012 Том 21, 2011 Том 20, 2010 Том 19, 2009 Том 18, 2008 Том 17, 2007 Том 16, 2006 Том 15, 2005 Том 14, 2004 Том 13, 2003 Том 12, 2002 Том 11, 2001 Том 10, 2000 Том 9, 1999 Том 8, 1998 Том 7, 1997 Том 6, 1996 Том 5, 1995 Том 4, 1994 Том 3, 1993 Том 2, 1992 Том 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.2015011208
pages 969-984

PRELIMINARY INVESTIGATION ON THE SPREADING ANGLE OF A NEAR-CRITICAL RP-3 KEROSENE JET

Le Jin
School of Power and Energy, Northwestern Polytechnical University, Xian, 710072, China
Wei Fan
School of Power & Energy, Northwestern Polytechnical University, Xi'an, 710072, China
Zhencen Fan
School of Power and Energy, Northwestern Polytechnical University, Xi'an 710072, People's Republic of China
Zhou Zhou
School of Power and Energy, Northwestern Polytechnical University, Xi'an, 710072, China
Jin Zhang
School of Power and Energy, Northwestern Polytechnical University, Xi'an, 710072, China

Краткое описание

The spreading angle of a near-critical RP-3 kerosene jet into a quiescent subcritical nitrogen chamber through a simple injector was experimentally investigated through a schlieren imaging system. The jet spreading angles affected by ambient pressure, injection pressure, and injection temperature are separately analyzed. It is found that the jet spreading angle increases with the increased injection pressure, but decreases with increased injection temperature. However, the jet spreading angle shows an unusual drastic changing trend when the ambient pressure is just from 2.5 to 3.0 MPa. These phenomena are analyzed based on the injection dynamics and injectant physical proprieties. It is believed that the sensitivity of the physical properties of the injectant in near-critical condition is responsible for the drastic changing trends of the jet spreading angle. The momentum of the injectant is a dominating factor instead of the density ratio that affects the jet spreading angle under this experimental condition.