Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Atomization and Sprays
Импакт фактор: 1.262 5-летний Импакт фактор: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN Печать: 1044-5110
ISSN Онлайн: 1936-2684

Выпуски:
Том 29, 2019 Том 28, 2018 Том 27, 2017 Том 26, 2016 Том 25, 2015 Том 24, 2014 Том 23, 2013 Том 22, 2012 Том 21, 2011 Том 20, 2010 Том 19, 2009 Том 18, 2008 Том 17, 2007 Том 16, 2006 Том 15, 2005 Том 14, 2004 Том 13, 2003 Том 12, 2002 Том 11, 2001 Том 10, 2000 Том 9, 1999 Том 8, 1998 Том 7, 1997 Том 6, 1996 Том 5, 1995 Том 4, 1994 Том 3, 1993 Том 2, 1992 Том 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.v3.i2.60
pages 203-221

SPRAY GROUP COMBUSTION IN A CYLINDRICAL NONPREMIXED COMBUSTOR

Tsung-Leo Jiang
Institute of Aeronautics and Astronautics, National Cheng Kung University, Tainan, Taiwan 70101 ROC
Huei-Huang Chiu
Institute of Aeronautics and Astronautics, National Cheng Kung University, Tainan, Taiwan,70101, ROC

Краткое описание

The present spray combustion computation studies numerically the effects of spray angles and injected droplet sites on the combustion efficiency and combustion modes of a cylindrical, nonpremixed combustor through implementation of a realistic droplet combustion model. Combustion efficiency increases with increasing spray cone angle, achieving a maximum value at an optimal injected mean droplet size. The predicted combustion modes indicate that fuel is consumed by the complementary processes of droplet and gas-phase combustion, and are significantly influenced by both spray cone angle and injected mean droplet size. Two flame patterns are identified based on injected droplet size. Small droplet spray is characterized by a diffusion flame separating the fuel and air streams, while large droplet spray exhibits intense mixed droplet and gas-phase combustion near the combustor watt. The results show that combustion efficiency for the former and latter increases and decreases, respectively, with increasing injected droplet sizes. The optimal injected droplet size is therefore suggested to occur at the transition between these two flame patterns.


Articles with similar content:

PARTICLE AND DROPLET CLUSTERING IN OSCILLATORY VORTICAL FLOWS
Atomization and Sprays, Vol.27, 2017, issue 7
J. Barry Greenberg, Yuval Dagan, David Katoshevski
BRACHIAL BURNING AND GASIFICATION SPLIT OF A CONVECTING TWO-DROPLET SYSTEM
Atomization and Sprays, Vol.12, 2002, issue 1-3
Wei-Hsin Chen
AN EXPERIMENT STUDY ON PHENOMENON AND MECHANISM OF FLASH BOILING SPRAY FROM A MULTI-HOLE GASOLINE DIRECT INJECTOR
Atomization and Sprays, Vol.23, 2013, issue 5
Shenghua Yang, Zhiping Song, Zhuo Yao, Tianyou Wang
AN APPROACH TO MODELING FLASH-BOILING FUEL SPRAYS FOR DIRECT-INJECTION SPARK-IGNITION ENGINES
Atomization and Sprays, Vol.26, 2016, issue 12
Pavlos Aleiferis, Arash Hamzehloo, Christopher Price, David Richardson
EULER/LAGRANGE CALCULATIONS OF TURBULENT SPRAYS: THE EFFECT OF DROPLET COLLISIONS AND COALESCENCE
Atomization and Sprays, Vol.10, 2000, issue 1
S. Hohmann, M. Ruger, Martin Sommerfeld, Gangolf Kohnen