Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Atomization and Sprays
Импакт фактор: 1.262 5-летний Импакт фактор: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN Печать: 1044-5110
ISSN Онлайн: 1936-2684

Выпуски:
Том 29, 2019 Том 28, 2018 Том 27, 2017 Том 26, 2016 Том 25, 2015 Том 24, 2014 Том 23, 2013 Том 22, 2012 Том 21, 2011 Том 20, 2010 Том 19, 2009 Том 18, 2008 Том 17, 2007 Том 16, 2006 Том 15, 2005 Том 14, 2004 Том 13, 2003 Том 12, 2002 Том 11, 2001 Том 10, 2000 Том 9, 1999 Том 8, 1998 Том 7, 1997 Том 6, 1996 Том 5, 1995 Том 4, 1994 Том 3, 1993 Том 2, 1992 Том 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.v20.i12.40
pages 1065-1076

EXPERIMENTAL INVESTIGATION OF NEAR NOZZLE SPRAY STRUCTURE AND VELOCITY FOR A GDI HOLLOWCONE SPRAY

D. Martin
Institute of Heat and Mass Transfer, RWTH Aachen University, Eilfschornsteinstr. 18, 52062 Aachen, Germany
M. Cardenas
Institute of Heat and Mass Transfer, RWTH Aachen University, 52062 Aachen, Germany
Philipp Pischke
Institute of Heat and Mass Transfer, RWTH Aachen University, Augustinerbach 6, 52062 Aachen, Germany
Reinhold Kneer
Institute of Heat and Mass Transfer, RWTH Aachen University, Augustinerbach 6, 52062 Aachen, Germany

Краткое описание

Previous experiments and numerical investigations of engine sprays show string-like structures at the exit of outwardly opening nozzles applied in gasoline direct injection (GDI) engines. These structures were further analyzed using visualization techniques and laser correlation velocimetry (LCV). Ambient conditions of 0.1 MPa and 300 K were chosen for all experiments, while injection pressure and injector energizing time were varied to resolve the influence of injection parameters on structure and velocity. Through application of a visualization measurement technique with a far-field microscope the string-like structures and their evolution during the injection period have been identified. In addition the influence of the injection parameters on the shape and location of the strings has been analyzed. After resolving the differences in string structure, the influence of the string structure on the velocity distribution at the nozzle exit was investigated for obtaining a correlation between string structure and spray velocity. Finally, the dependency of spray exit velocity on injection pressure and injection duration was determined. The information about string structure and nozzle exit velocity can be used to deduce different influences on the primary breakup of a hollow cone spray generated by an outwardly opening nozzle.


Articles with similar content:

LDA/PDA CHARACTERIZATION OF CONICAL SPRAY FOR DIESEL ENGINE
ICLASS 94
Proceedings of the Sixth International Conference on Liquid Atomization and Spray Systems, Vol.0, 1994, issue
T. Obokata, W. Q. Long
EXPERIMENTAL INVESTIGATIONS ON A PIEZO-ACTIVATED HOLLOW CONE INJECTOR − PART II: THE INFLUENCE OF NEEDLE LIFT ON DROPLET SIZE DISTRIBUTIONS AND VORTEX FORMATION
Atomization and Sprays, Vol.24, 2014, issue 10
Graham Wigley, Konstantinos Boulouchos, B. Schneider, Andreas Schmid
ANALYSIS OF DIESEL SPRAY ATOMIZATION BY MEANS OF A NEAR-NOZZLE FIELD VISUALIZATION TECHNIQUE
Atomization and Sprays, Vol.21, 2011, issue 9
Jaime Gimeno, Raul Payri, Javier Salvador, J. De la Morena
LASER DIAGNOSTICS OF TRANSVERSE TURBULENT JETS
Journal of Flow Visualization and Image Processing, Vol.7, 2000, issue 4
V. Sivadas, B. S. Pani, K. A. Butefisch
ELECTROSTATIC EFFECTS ON GASOLINE DIRECT INJECTION IN ATMOSPHERIC AMBIANCE
Atomization and Sprays, Vol.17, 2007, issue 4
Dimitros C. Kyritsis, Arturo De Risi, Eric K. Anderson, Antonio P. Carlucci