Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Atomization and Sprays
Импакт фактор: 1.262 5-летний Импакт фактор: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN Печать: 1044-5110
ISSN Онлайн: 1936-2684

Выпуски:
Том 29, 2019 Том 28, 2018 Том 27, 2017 Том 26, 2016 Том 25, 2015 Том 24, 2014 Том 23, 2013 Том 22, 2012 Том 21, 2011 Том 20, 2010 Том 19, 2009 Том 18, 2008 Том 17, 2007 Том 16, 2006 Том 15, 2005 Том 14, 2004 Том 13, 2003 Том 12, 2002 Том 11, 2001 Том 10, 2000 Том 9, 1999 Том 8, 1998 Том 7, 1997 Том 6, 1996 Том 5, 1995 Том 4, 1994 Том 3, 1993 Том 2, 1992 Том 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.2017020387
pages 723-739

NUMERICAL STUDY OF SUBMERGED CAVITATING THROTTLE FLOWS

Bruno Beban
Technical University of Munich, Department of Mechanical Engineering, Chair of Aerodynamics and Fluid Mechanics, Germany
S. J. Schmidt
Chair of Aerodynamics and Fluid Mechanics, Department of Mechanical Engineering, Technical University of Munich, 85748 Garching bei München, Germany
N. A. Adams
Technical University of Munich, Department of Mechanical Engineering, Chair of Aerodynamics and Fluid Mechanics, Germany

Краткое описание

We investigate by numerical simulation a highly unsteady cavitating flow of ISO 4113 test fuel in the valve chamber of a Diesel common rail injection system. Two-phase modeling is based on a single-fluid approach and a homogeneous mixture model. A fully compressible flow solver, taking into account the compressibility of liquid and liquid–vapor mixture, is employed. Computational results for two similar designs are presented. We discuss the cavity dynamics and reverse flow development in the discharge throttles for a pressure drop of approximately 2000 bar and choked flow conditions. The focus of this study is placed on inertia-driven effects and formation of collapse-induced pressure peaks, which allows us to apply an inviscid flow model. Our contribution assesses the erosion risk by monitoring maximum instantaneous wall pressures and employing a collapse detector algorithm for the identification of implosions of isolated vapor clouds. High-speed liquid jet discharging from the throttle, accompanied by supercavitation and reverse motion in the throttle, is predicted by the numerical simulation. Collapse pressures higher than 1 GPa are observed near material surfaces, resulting in high surface loads which can eventually lead to material erosion.

Ключевые слова: cavitation, compressible, erosion, Diesel fuel injector

Articles with similar content:

LARGE EDDY SIMULATIONS OF CAVITATING FLOW IN A STEP NOZZLE WITH INJECTION INTO GAS
Atomization and Sprays, Vol.28, 2018, issue 10
S. J. Schmidt, Nikolaus A. Adams, Theresa Trummler, D. Rahn
ACOUSTICALLY AND THERMOACOUSTICALLY DRIVEN TRANSPORT IN GASES: NEW ADVANCES
International Heat Transfer Conference 16, Vol.9, 2018, issue
Bakhtier Farouk
THE RESPONSE OF A PYROTECHNIC POWDER UNDER DYNAMIC LOADING CONDITIONS
International Journal of Energetic Materials and Chemical Propulsion, Vol.4, 1997, issue 1-6
Alice I. Atwood, P. O. Curran, J. Wiknich, C. F. Price, S. A. Finnegan
Study of Bubble Bursting at Free Surface using Coupled Eulerian-Lagrangian Approach
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), Vol.0, 2017, issue
Arup Kumar Das, Digvijay Singh
Transonic airfoil buffet at high Reynolds number by using wall-modeled large-eddy simulation
TSFP DIGITAL LIBRARY ONLINE, Vol.10, 2017, issue
Soshi Kawai, Yuma Fukushima