Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Atomization and Sprays
Импакт фактор: 1.262 5-летний Импакт фактор: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN Печать: 1044-5110
ISSN Онлайн: 1936-2684

Выпуски:
Том 29, 2019 Том 28, 2018 Том 27, 2017 Том 26, 2016 Том 25, 2015 Том 24, 2014 Том 23, 2013 Том 22, 2012 Том 21, 2011 Том 20, 2010 Том 19, 2009 Том 18, 2008 Том 17, 2007 Том 16, 2006 Том 15, 2005 Том 14, 2004 Том 13, 2003 Том 12, 2002 Том 11, 2001 Том 10, 2000 Том 9, 1999 Том 8, 1998 Том 7, 1997 Том 6, 1996 Том 5, 1995 Том 4, 1994 Том 3, 1993 Том 2, 1992 Том 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.2014011350
pages 47-80

ATOMIZATION MODELLING OF LIQUID JETS USING A TWO-SURFACE-DENSITY APPROACH

Bejoy Mandumpala Devassy
IFP Energies Nouvelles, let 4 Avenue de Bois-Preau, 92852 Rueil-Malmaison, France
Chawki Habchi
IFP Energies Nouvelles, let 4 Avenue de Bois-Preau, 92852 Rueil-Malmaison, France
Eric Daniel
Aix-Marseille Universite, IUSTI, 5 rue E. Fermi 13453 Marseille Cedex 13, France

Краткое описание

In internal combustion engines, the liquid fuel injection is an essential step for the air/fuel mixture preparation and the combustion process. Indeed, the structure of the liquid jet coming out from the injector plays a key role in the proper mixing of the fuel with the gas in the combustion chamber. The present work focuses on the liquid jet atomization phenomena under diesel engine conditions. Under these conditions, liquid jet morphology is assumed, including a separate liquid phase (i.e., a liquid core) and a dispersed liquid phase (i.e., a spray). This article describes the developmental stages of a new atomization model, for a high-speed liquid jet, based on an Eulerian-Eulerian two-fluid approach. The atomization phenomena are modelled by defining different surface density equations for the liquid core and the spray droplets. This new model has been coupled with a turbulent and highly compressible two-fluid system of equations. The process of ligament breakup and its subsequent breakup into droplets are handled by acquiring knowledge from the available high-fidelity experiments and numerical simulations. In the dense region of the liquid jet, the atomization is modelled as a dispersion process due to the stretching of the interface, from the liquid side in addition to the gas side. The model results have been compared to a recently published DNS results under typical direct injection diesel engine conditions. In particular, it has been shown that the interface instabilities and the turbulence in the leading tip of the liquid core play a major role in the primary atomization of diesel jets.


Articles with similar content:

NUMERICAL INVESTIGATION ON THE DISINTEGRATION OF ROUND TURBULENT LIQUID JETS USING LES/VOF TECHNIQUES
Atomization and Sprays, Vol.18, 2008, issue 7
Vedanth Srinivasan, Kozo Saito, Abraham J. Salazar
INJECTION, ATOMIZATION AND MIXING OF PROPELLANTS IN LIQUID ROCKET ENGINES USING COXIAL INJECTORS
ICLASS 94
Proceedings of the Sixth International Conference on Liquid Atomization and Spray Systems, Vol.0, 1994, issue
G. Krulle, W. Mayer
END OF INJECTION PROCESS IN A SINGLE-HOLE DIESEL INJECTOR
Atomization and Sprays, Vol.28, 2018, issue 1
V. Garaniya, P. A. Brandner, Mohammadmahdi Ghiji, P. Hield, Laurie Goldsworthy
A GIBBS ENERGY RELAXATION (GERM) MODEL FOR CAVITATION SIMULATION
Atomization and Sprays, Vol.25, 2015, issue 4
Chawki Habchi
LARGE EDDY SIMULATION OF SHOCK WAVE/TURBULENT BOUNDARY LAYER INTERACTION AT M=2.25
TSFP DIGITAL LIBRARY ONLINE, Vol.5, 2007, issue
Samuel Dubos, Abdellah Hadjadj, Guillaume Ribert