Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Atomization and Sprays
Импакт фактор: 1.262 5-летний Импакт фактор: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN Печать: 1044-5110
ISSN Онлайн: 1936-2684

Выпуски:
Том 29, 2019 Том 28, 2018 Том 27, 2017 Том 26, 2016 Том 25, 2015 Том 24, 2014 Том 23, 2013 Том 22, 2012 Том 21, 2011 Том 20, 2010 Том 19, 2009 Том 18, 2008 Том 17, 2007 Том 16, 2006 Том 15, 2005 Том 14, 2004 Том 13, 2003 Том 12, 2002 Том 11, 2001 Том 10, 2000 Том 9, 1999 Том 8, 1998 Том 7, 1997 Том 6, 1996 Том 5, 1995 Том 4, 1994 Том 3, 1993 Том 2, 1992 Том 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.2015011185
pages 687-712

SEMI-EMPIRICAL MODEL FOR THE UNSTEADY SHEAR BREAKUP OF LIQUID JETS IN CROSS-FLOW

Georg Eckel
German Aerospace Center (DLR), Institute of Combustion Technology, Pfaffenwaldring 38-40, 70569 Stuttgart, Germany
Michael Rachner
German Aerospace Center (DLR), Institute of Combustion Technology, Pfaffenwaldring 38-40, 70569 Stuttgart, Germany
Patrick Le Clercq
German Aerospace Center (DLR), Institute of Combustion Technology, Pfaffenwaldring 38-40, 70569 Stuttgart, Germany
Manfred Aigner
German Aerospace Center (DLR), Institute of Combustion Technology, Pfaffenwaldring 38-40, 70569 Stuttgart, Germany

Краткое описание

The accuracy of spray simulations depends strongly on the initial and boundary conditions imposed on both the gaseous and the liquid phase. In many applications the droplet size distribution and droplet velocities close to the atomizer cannot be determined. In this study, a semi-empirical primary atomization model for Lagrangian particle tracking of the dispersed phase in Euler-Lagrange simulations is proposed. The examined atomization concept of a liquid jet in cross-flow subjected to a high velocity air stream is a configuration typical of industrial gas turbine applications. The model provides initial and boundary conditions not only via correlations for global parameters like characteristic diameters, it also delivers the sizes, starting positions and velocities of the droplets. This leads to an improved approximation of the droplet formation, droplet size distribution, and droplet propagation encountered in real sprays, which is here assessed by comparing simulation results with measurements.


Articles with similar content:

DROP IMPACT EXPERIMENT AS A MODEL EXPERIMENT TO INVESTIGATE THE ROLE OF OIL-IN-WATER EMULSIONS IN CONTROLLING THE DROP SIZE DISTRIBUTION OF AN AGRICULTURAL SPRAY
Atomization and Sprays, Vol.26, 2016, issue 8
Christian Ligoure, Laurence Ramos, Jean-Paul Douzals, Rajesh Goyal, Clara Vernay, Jean-Christophe Castaing
MODELING OF WATER DROP IMPACTIONS IN THE LEIDENFROST REGIME
Atomization and Sprays, Vol.26, 2016, issue 9
Guillaume Castanet, Jean-Mathieu Senoner, Ophelie Caballina, P. Villedieu
ON THE PREDICTIONOFAN AVERAGE DROPLET SIZE EVOLUTION DURING TRANSPORT IN HOMOGENEOUSPOROUS MEDIA UNDERLAMINAR FLOW CONDITIONS
Journal of Porous Media, Vol.13, 2010, issue 3
Frank A. Coutelieris
ATOMIZATION AND DISPERSION MEASUREMENTS IN FIRE SPRINKLER SPRAYS
Atomization and Sprays, Vol.19, 2009, issue 12
C. Do, Andre W. Marshall, Ning Ren, A. Blum
AVERAGE DROPLET DIAMETER SPATIAL DISTRIBUTION IN A SPRAY AFTER GAS-ASSISTED PREMIXED ATOMIZATION
Atomization and Sprays, Vol.21, 2011, issue 8
Konstantin Pougatch, J. McMillan, Martha Eva Salcudean