Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Atomization and Sprays
Импакт фактор: 1.262 5-летний Импакт фактор: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN Печать: 1044-5110
ISSN Онлайн: 1936-2684

Выпуски:
Том 29, 2019 Том 28, 2018 Том 27, 2017 Том 26, 2016 Том 25, 2015 Том 24, 2014 Том 23, 2013 Том 22, 2012 Том 21, 2011 Том 20, 2010 Том 19, 2009 Том 18, 2008 Том 17, 2007 Том 16, 2006 Том 15, 2005 Том 14, 2004 Том 13, 2003 Том 12, 2002 Том 11, 2001 Том 10, 2000 Том 9, 1999 Том 8, 1998 Том 7, 1997 Том 6, 1996 Том 5, 1995 Том 4, 1994 Том 3, 1993 Том 2, 1992 Том 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.v21.i1.10
pages 1-16

Dynamic Primary Atomization Characteristics in an Airblast Atomizer, High Pressure Conditions

Vital Gutierrez Fernandez
Heterogeneous, Multiphase Flows Unit, Aerodynamic and Energetic Models Department, Office National d'Etudes et de la Recherche Aérospatiales (ONERA), Toulouse, France
G. Lavergne
Heterogeneous, Multiphase Flows Unit, Aerodynamic and Energetic Models Department, Office National d'Etudes et de la Recherche Aérospatiales (ONERA), 31055 Toulouse Cedex 4, France
P. Berthoumieu
Heterogeneous, Multiphase Flows Unit, Aerodynamic and Energetic Models Department, Office National d'Etudes et de la Recherche Aérospatiales (ONERA), 31055 Toulouse Cedex 4, France

Краткое описание

The primary atomization was studied experimentally for several flow configurations, in a planar airblast atomizer. The liquid sheet injected had a 300μm thickness. The employed techniques were Laser Oscillometry, LDV-PDI, PIV and flow visualization via fast camera. In the liquid flow, the momentum flux was varied by injecting both water and kerosene JET A1 at several velocities. Conversely, the airflow momentum flux was modified by adjusting both its velocity and absolute pressure. The latter parameter reached a value of 11bar. The atomization mechanisms described in the literature at standard conditions, were observed at the high pressure environments, as long as, the momentum flux ratio, M, remained constant. Furthermore, a new atomization mechanism was observed for values of M beyond 20. This regime was referred as membrane break-up due to the predominant structures observed. The results presented in this manuscript correspond to characteristics related to the sheets's motion: The global oscillation frequency, the wave velocity gradient in the intact sheet region and the sauter mean diameter far from the injector lips. Furthermore, these variables displayed a weak change both in magnitude and behaviour with the changes in atomization mechanisms. A set of empirical relations are provided to link these characteristics witht the flow conditions.


Articles with similar content:

SPRAY ATOMIZATION CHARACTERISTICS OF A LOW PRESSURE ROTARY INJECTOR
Atomization and Sprays, Vol.29, 2019, issue 6
Kushal Ghate, Thirumalachari Sundararajan, Shraddha Sharma
INJECTION OF WATER-IN-OIL EMULSION JETS INTO A SUBSONIC CROSSFLOW: AN EXPERIMENTAL STUDY
Atomization and Sprays, Vol.24, 2014, issue 4
Guillermo A. Gomez, Christopher D. Bolszo, G. Scott Samuelsen, Vincent McDonell
Geometric Primary Atomization Characteristics in an Airblast Atomizer, High Pressure Conditions
Atomization and Sprays, Vol.21, 2011, issue 1
P. Berthoumieu, G. Lavergne, Vital Gutierrez Fernandez
BREAKUP DYNAMICS AND NEAR NOZZLE SPRAY FLUCTUATIONS IN A TWIN-JET CROSS-FLOW AIRBLAST ATOMIZER
Atomization and Sprays, Vol.29, 2019, issue 3
Srikrishna Sahu, Shirin Patil
SPRAY BEHAVIOR OF THE ROTARY ATOMIZER WITH IN-LINE INJECTION ORIFICES
Atomization and Sprays, Vol.20, 2010, issue 10
Seong Ho Jang, Seong Man Choi