Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Atomization and Sprays
Импакт фактор: 1.262 5-летний Импакт фактор: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 1.6

ISSN Печать: 1044-5110
ISSN Онлайн: 1936-2684

Выпуски:
Том 29, 2019 Том 28, 2018 Том 27, 2017 Том 26, 2016 Том 25, 2015 Том 24, 2014 Том 23, 2013 Том 22, 2012 Том 21, 2011 Том 20, 2010 Том 19, 2009 Том 18, 2008 Том 17, 2007 Том 16, 2006 Том 15, 2005 Том 14, 2004 Том 13, 2003 Том 12, 2002 Том 11, 2001 Том 10, 2000 Том 9, 1999 Том 8, 1998 Том 7, 1997 Том 6, 1996 Том 5, 1995 Том 4, 1994 Том 3, 1993 Том 2, 1992 Том 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.v12.i123.120
pages 229-245

A COMPARISON OF SPRAY CHARACTERISTICS BETWEEN AN AIR-ASSISTED FUEL INJECTOR AND A HIGH-PRESSURE SWIRL INJECTOR FOR GASOLINE DIRECT-INJECTION ENGINE APPLICATION

C. Jang
Precision Instrument R&D Center, Samsung Techwin Co., Ltd., Sungnam City, Kyungki, Korea

Краткое описание

The spray characteristics of two preferred injection tools for gasoline direct-injection (DI) application were compared. An air-assisted fuel injector (AAFI) and a high-pressure swirl injector (HPSI) were designed and fabricated, and the characterization strategies and processes for both injector sprays were arranged in parallel. In this article, the overall spray characteristics, defined as spray pattern, penetration, internal spray structure, atomization performance and drop size distribution, are discussed. A spray shape factor is introduced to describe the development of intermittent sprays from both injectors. Axial penetration appears to be almost linear in the case of the AAFI, while its instantaneous speed continuously decreases with time in the HPSI. Large droplets are distributed at the tail end of the AAFI spray, while they are concentrated on the head portion of the HPSI spray. From the viewpoint of mean drop diameter, feasible ranges of injection and of ambient pressure are found to be broader in the HPSI. Drop size distributions of the HPSI are found to be more uniform than those of the AAFI.


Articles with similar content:

TWO COMPONENT VELOCITY AND SIZE MEASUREMENTS FOR A NON-COMBUSTING FUEL SPRAY IN A DIESEL SWIRL COMBUSTION CHAMBER
ICLASS 94
Proceedings of the Sixth International Conference on Liquid Atomization and Spray Systems, Vol.0, 1994, issue
G. Pitcher, G. Wigley
SPRAY VISUALIZATION AND HYDRAULIC CHARACTERIZATION OF THE HOLES OF A FIVE-HOLE, VALVE-COVERED-ORIFICE NOZZLE OF AN ELECTRONICALLY CONTROLLED DIESEL INJECTOR
Atomization and Sprays, Vol.6, 1996, issue 3
D. Laforgia, V. Damiani, R. Campanella
FLOW-FIELD INVESTIGATION OF MULTI-HOLE SUPERHEATED SPRAYS USING HIGH-SPEED PIV. PART I.
CROSS-SECTIONAL DIRECTION

Atomization and Sprays, Vol.22, 2012, issue 11
David J. Cleary, Ming Zhang, Yuyin Zhang, Min Xu, Gaomimg Zhang
Characterization of Direct-Injection Gasoline Sprays under Different Ambient and Fuel Injection Conditions
International Journal of Fluid Mechanics Research, Vol.24, 1997, issue 4-6
J.-H. Yoo, Fu-Quan Zhao, K.-S. Lee, Ming Chia Lai, Y. Liu
TIME-RESOLVED CHARACTERIZATION OF LOW-PRESSURE PULSED INJECTOR
Atomization and Sprays, Vol.26, 2016, issue 8
Pramod S. Mehta, Rohit Singh Pathania, Satyanarayanan R. Chakravarthy