International Journal of Energy for a Clean Environment
Выходит 8 номеров в год
ISSN Печать: 2150-3621
ISSN Онлайн: 2150-363X
SJR:
0.597
SNIP:
1.456
CiteScore™::
3.7
H-Index:
18
Indexed in
LOW-NOx COMBUSTION TECHNOLOGIES FOR PROCESS HEATING: TWO DECADES OF RESEARCH AND DEVELOPMENT ACTIVITIES AT GWI
Том 6,
Выпуск 4, 2005,
pp. 375-392
DOI: 10.1615/InterJEnerCleanEnv.v6.i4.20
Краткое описание
This paper gives an overview about low-NOx combustion technologies and summarizes the activities of GWI in that area during the last 20 years. The focus will be drawn to actual low-NOx technologies like flameless oxidation and staged combustion, and their application in process technology. Substantial advances in recent years have been made in combustion engineering and the recovery of heat from flue gas for preheating of the combustion air. Flameless oxidation, direct fuel-gas injection (Japan), and the development of ceramic self-recuperative and regenerative burners are examples of innovative developments. These systems allow combustion efficiencies of up to 85%.
375 Просмотры статей
23 Загрузка статей
Метрики
Статьи с похожим содержанием:
Последний выпуск
Статьи, принятые к публикации
APPLICATION OF MICROBIAL FUEL CELL FOR CASSAVA FERMENTATION WASTEWATER TREATMENT
Experimental and regression analysis of C. I engine powered by diesel surrogate fuel from waste lubricating oil using microwave pyrolysis
PREFACE
Thermal analysis and Improvement of Municipal Solid Waste Syngas Combustion applied on Micro Gas Turbine
Numerical simulation of turbulent flow in a heat exchanger equipped with fins of different materials and geometries
Low-Cost Photovoltaic Emulator With a High-Dynamic Response for Small Satellite Applications
Collection efficiency analysis and structure optimization of fugitive fumes from aluminum electrolysis based on multi-field coupling
Transient Analysis of Liquid Hydrogen Transfer in Cryogenic Storage Tanks
Pure Ammonia Combustion in a Bidirectional Swirling Flow
CFD modeling of the combustion of Ukrainian coal and biomass in a flare boiler unit TPP-210a
An Experimental Study of the Cooling Efficiency on Curved Surfaces with Different Shaped Holes
Employing Granulated Bimetallic Nanocomposite of Ni/Cu@CuMOF Nanocomposite in Steam Reforming of Methanol Process for Hydrogen Production
INVESTIGATION THE PERFORMANCE OF AN EVACUATED TUBE SOLAR COLLECTOR FILLED WITH AL2O3/WATER NANOFLUID UNDER THE CLIMATE CONDITIONS OF AL-HILLA(IRAQ)
The effect of carbonization temperature on the properties of carbonaceous material obtained from ethylene-propylene-diene-monomer (EPDM) wastes
THE SOCIAL COST OF CARBON EVALUATION BASED ON CARBON CAPTURE AND STORAGE TECHNOLOGIES FOR POWER GENERATION PLANTS