International Journal of Fluid Mechanics Research
Выходит 6 номеров в год
ISSN Печать: 2152-5102
ISSN Онлайн: 2152-5110
IF:
1.1
5-Year IF:
1.3
Eigenfactor:
0.0002
JCI:
0.33
SJR:
0.256
SNIP:
0.49
CiteScore™::
2.4
H-Index:
23
Indexed in
Том 24, 1997 Выпуск 1-3
DOI: 10.1615/InterJFluidMechRes.v24.i1-3
Investigation of a Liquid Jet in a Subsonic Cross-Flow
pp. 1-12
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.10
Determination of Instability Scales on a Liquid Jet through an Image Analysis Method
pp. 13-23
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.20
2 MW Diesel Fuel Oil & Water Spray Characteristics − a Comparison
pp. 24-33
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.30
Characteristics of the Internal Flow in a Diesel Injection Nozzle
pp. 34-44
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.40
Effects of Fuel Viscosity and Ambient Temperature on Spray Characteristics from Multi-Hole Nozzle Injectors
pp. 45-53
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.50
Internal Flow Analysis of a Diesel Spray Using Two Stage Injection System
pp. 54-64
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.60
Experimental Investigation of Flow Conditions Inside an Air-Assisted Internal-Mixing Nozzle and their Correlation with Spray Data
pp. 65-75
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.70
Effects of Mixing Chamber Geometry and Flow on Spray Characteristics from an Internal Mixing Twin-Fluid Atomizer
pp. 76-87
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.80
Experimental Study on Droplet Ejection Due to Gas Bubble Bursting on Liquid Surface (Basic Study for its Application to Particle Production)
pp. 88-96
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.90
Droplet Dynamics in Shear Flow Induced by a Moving Plate
pp. 108-116
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.110
Atomization Versus Targeting for Port-Fuel Injectors - an Unresolvable Conflict?
pp. 117-127
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.120
Spray Trajectories of Liquid Fuel Jets in Subsonic Crossflows
pp. 128-137
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.130
Fuel Droplet Dynamics and Dispersion of Practical Twin-Fluid Atomizer for Oil Furnace
pp. 138-148
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.140
The Point-Particle/Continuum-Field Theory of Spray Flows
pp. 149-159
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.150
Atomization Characteristics of Liquefied n-Butane Spray Injected by High Injection Pressure
pp. 160-168
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.160
Atomization Characteristics of Liquefied n-Butane Spray Injected by High Injection Pressure
pp. 169-179
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.170
The Effect of Gas Property on Atomization Features of Dissolved Gas Jet
pp. 180-188
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.180
Use of the Theory of Nonlinear Dynamical Systems to Study the Growth of Perturbations in an Excited Water Jet
pp. 189-197
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.190
Effect of Fuel Injection Parameters on the Combustion Performance and Emission in the Direct Injection Type Diesel Engine
pp. 198-209
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.200
Experimental Study on the Droplets Distributions and Formation of Liquid Film after Impingement on the Heated Plate with and without Triangular Grooves
pp. 210-219
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.210
Disintegration Characteristics of Liquid Jet Ejected from Internal Mixing Twin Fluid Atomizers
pp. 220-229
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.220
Activities on Liquid Atomization at the Research Center Lampoldshausen of the German Aerospace Research Establishment
pp. 230-238
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.230
The Effect of Manifold Cross-Flow on the Discharge Coefficient of Sharp-Edged Orifices
pp. 239-250
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.240
Spray Break-Up Process of Diesel Fuel Investigated Close to the Nozzle
pp. 251-260
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.250
Image Analysis of a Diesel Spray Impinging on a Wall
pp. 261-272
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.260
Atomization Characteristics of Liquefied n-Butane Spray with Flash Boiling Phenomena
pp. 273-282
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.270
Comparison between Laser Diffraction Method and Phase Doppler Method for Spray Characteristics of Air-Assisted Swirl Atomized
pp. 283-293
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.280
Control of Transient Injection and Fast Spray Dynamics
pp. 294-306
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.290
Critical Conditions for Single Droplets Ignition and Combustion
pp. 307-313
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.300
Numerical and Experimental Investigations of the Spray Coating Process
pp. 322-330
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.320
Observation of Droplet Cluster Behaviors in a Premixed-Spray Flame by Laser Tomography
pp. 331-339
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.330
Black Liquor Sheet Breakup Mechanisms and the Effect on Drop Size
pp. 350-357
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.350
Experimental Investigation of a Polydispersed Water Spray Impinging on a Conical Surface
pp. 358-369
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.360
Characterization of Cavitation Flow in a Simple Hole Nozzle
pp. 370-379
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.370
Fuel Flow Characteristics and Cavitation Phenomena in Nozzle of Diesel Spray by Planer Acrylic Model
pp. 380-388
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.380
Characteristics of Bubbling Liquid Jet Atomization Across a High-Speed Airstream (Control of Spatial Distribution of Fuel Liquid and Combustion Gas Temperature)
pp. 389-398
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.390
Disintegration of Annular Liquid Sheet with Core Air Flow − Mode Classification
pp. 399-406
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.400
Spray Characteristics of Y-Jet-Type Airblast Atomizer Embedding Fluid Amplifier
pp. 407-415
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.410
Unsteady Breakup of Liquid Jets in Coaxial Airblast Atomizers
pp. 416-427
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.420
The Break-up Length of Laminar Cylindrical Liquid Jets. Modification of Weber's Theory
pp. 428-438
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.430
Frequency Analysis of Disintegrating Liquid Column
pp. 439-449
DOI: 10.1615/InterJFluidMechRes.v24.i1-3.440