Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
International Journal of Fluid Mechanics Research
ESCI SJR: 0.206 SNIP: 0.446 CiteScore™: 0.5

ISSN Печать: 2152-5102
ISSN Онлайн: 2152-5110

Выпуски:
Том 47, 2020 Том 46, 2019 Том 45, 2018 Том 44, 2017 Том 43, 2016 Том 42, 2015 Том 41, 2014 Том 40, 2013 Том 39, 2012 Том 38, 2011 Том 37, 2010 Том 36, 2009 Том 35, 2008 Том 34, 2007 Том 33, 2006 Том 32, 2005 Том 31, 2004 Том 30, 2003 Том 29, 2002 Том 28, 2001 Том 27, 2000 Том 26, 1999 Том 25, 1998 Том 24, 1997 Том 23, 1996 Том 22, 1995

International Journal of Fluid Mechanics Research

DOI: 10.1615/InterJFluidMechRes.v43.i1.20
pages 18-27

Experimental Study on a Prototype Centrifugal Pump with Open Impeller During Stopping Period

Yu-Liang Zhang
College of Mechanical Engineering, Quzhou University, 324000, Quzhou, China
Zu-Chao Zhu
The Zhejiang Provincial Key Lab of Fluid Transmission Technology, Zhejiang Sci-Tech University, 310018, Hangzhou, China
Yi-Ni Sheng
College of Mechanical Engineering, Quzhou University Quzhou, 324000, China
Bao-Ling Cui
The Zhejiang Provincial Key Lab of Fluid Transmission Technology, Zhejiang Sci-Tech University Hangzhou, 310018, China
Yi Li
The Zhejiang Provincial Key Lab of Fluid Transmission Technology, Zhejiang Sci-Tech University Hangzhou, 310018, China

Краткое описание

The transient hydraulic performance of vane pumps during abrupt stopping period has drawn more and more attentions in recent years. In order to reveal the transient characteristics of a low-specific-speed prototype centrifugal pump with an open impeller during stopping period, a transient test bed is built to obtain the variation characteristics of performance parameters, such as rotating speed, static pressures at pump inlet and outlet, pump head, flow rate, shaft torque, and shaft power. The experiments are accomplished on the condition of different valve openings. The experimental results show that besides the shut-off condition, the time for the open impeller to stop rotating is shorter and shorter with the increase of the stable flow rate before stopping. Moreover, the rotating speed curves become more steep. On the condition of eight valve openings, the rotating speed curves basically meet the cubic varieties. An important characteristic of flow rate curves is to show the three segmentation feature, that is to say, the early, middle, and late stages appear in these flow rate curves. It is also seen that on the beginning of the stopping (about before 1 s), the variation of flow rate is relatively stable, and greatly delayed to the decrease histories of rotating speed. With the increase of the stable flow rate before stopping, the time for the flow rate to achieve relatively stable displays a slightly decreasing tendency. Meanwhile, the time for the flow to thoroughly stop becomes more and more, this characteristic are completely opposite to that of rotating speed curves. The variations of the static pressures at pump inlet are very violent during whole stopping periods, and gradually become relatively stable at about 6 s. At about 4.5 s, the static pressure at pump outlet and the pump head decrease to the corresponding stable values. The variation tendencies of the shaft torque and shaft power is basically consistent, both of them rapidly decline with the rapid decrease of the rotating speed.