Доступ предоставлен для: Guest
Портал Begell Электронная Бибилиотека e-Книги Журналы Справочники и Сборники статей Коллекции
Interfacial Phenomena and Heat Transfer
ESCI SJR: 0.258 SNIP: 0.574 CiteScore™: 0.8

ISSN Печать: 2169-2785
ISSN Онлайн: 2167-857X

Interfacial Phenomena and Heat Transfer

DOI: 10.1615/InterfacPhenomHeatTransfer.2018025178
pages 231-249

DYNAMICS AND EVAPORATION OF A THIN LOCALLY HEATED LIQUID FILM SHEARED BY A VAPOR FLOW IN A MICROCHANNEL

Yulia O. Kabova
Institute of Thermophysics, Russian Academy of Sciences, Novosibirsk 630090, Russia; Centre of Smart Interfaces, Technische Universitaet Darmstadt, 64287 Darmstadt, Germany
Vladimir Kuznetsov
Lavrentyev Institute of Hydrodynamics
Haruhiko Ohta
Kyushu University
Oleg A. Kabov
Kutateladze Institute of Thermophysics of the Siberian Branch of the Russian Academy of Sciences, 1, Acad. Lavrentyev Ave., Novosibirsk, 630090, Russia; Institute of Power Engineering, National Tomsk Polytechnic Research University, 7, Usova Street, Tomsk, 634050, Russia; Novosibirsk State University, 2, Pirogova str., Novosibirsk, 630090, Russia

Краткое описание

To study the mechanism of evaporation and dynamics of the joint motion of a thin liquid film and the co-current vapor flow in a microchannel at local heating, a new three-dimensional non-stationary two-sided mathematical model has been proposed. The model takes into account the deformable gas–liquid interface, transfer of heat by liquid and vapor flow, heat loses due to evaporation, thermal conductivity in layers, as well as the temperature dependence of surface tension and liquid viscosity. Assuming the lubrication theory to be valid, the problem has been reduced to four governing equations for the film thickness, temperature fields in the vapor and liquid, and vapor pressure. The significant effect of heater length in the longitudinal direction on the film deformations and evaporation is shown numerically. The calculations show that there is an essentially nonlinear dependence of the minimum film thickness and maximum temperature on the length of the heater at the vapor–liquid interface. It has been found that the average evaporation intensity in all areas of the calculations may practically depend linearly on the length of the heating element.


Articles with similar content:

HEAT AND MASS TRANSFER IN FILM ABSORPTION IN THE PRESENCE OF NON-ABSORBABLE GASES
International Heat Transfer Conference 10, Vol.8, 1994, issue
Gershon Grossman, K. Gommed
Effect of conjoining/disjoining pressures on evaporation from or condensation on coated surfaces
International Heat Transfer Conference 12, Vol.3, 2002, issue
Alexander Oron, S. George Bankoff
Numerical Simulation of Heat Transfer in Boiling Nitrogen under Swirl Forced Flow
Heat Transfer Research, Vol.29, 1998, issue 1-3
O. B. Karpova, A. B. Yakovlev, Stanislav E. Tarasevich
Self-Aggregation of Vapor-Liquid Phase Transition and Inner Structure of a Boiling Nucleus
ICHMT DIGITAL LIBRARY ONLINE, Vol.2, 2004, issue
Bu-Xuan Wang, Yong Tian, Xiao-Feng Peng, Xiao-Dong Wang
MODELLING OF HEAT AND MASS TRANSFER WITH FOG FORMATION
International Heat Transfer Conference 10, Vol.8, 1994, issue
K. Schaber, J. Korber