Выходит 4 номеров в год
ISSN Печать: 2169-2785
ISSN Онлайн: 2167-857X
Indexed in
SIMULATING INJECTION MOLDING OF SEMI-CRYSTALLINE POLYMERS: EFFECT OF CRYSTALLIZATION ON THE DYNAMICS OF CHANNEL FILLING
Краткое описание
Non-isothermal filling of a vertical round pipe with a non-Newtonian fluid is studied taking into account crystallization with first-type boundary conditions for a wall temperature. The liquid medium is considered as a semi-crystalline polymer fluid exhibiting rheological behavior described by the Carreau-Yasuda model. In addition, dependence of apparent viscosity on the degree of crystallinity is taken into account. Phase transition effects are described in accordance with the Avrami-Kolmogorov theory. Mathematical formulation of the problem includes equations of motion, energy, and continuity. Numerical solution of the problem is carried out using an original computational technique. As the pipe is being filled with a fluid, distributions of flow characteristics are shown with a distinguished crystallized layer on a solid wall.
-
Avrami, M., Granulation, Phase Change, and Microstructure Kinetics of Phase Change. III, J. Chem. Phys, vol. 9, no. 2, pp. 177-184,1941.
-
Benayad, A., Boutaous, M., Otmani, R.E., Hakimi, A.E., Touache, A., Kamal, M.R., Derdouri, S., Zakariaa, R., and Siginer, D.A., Simulation of Crystallization Evolution of Polyoxymethylene during Microinjection Molding Cycle, Polym. Adv. Technol., vol. 31, pp. 838-852,2020.
-
Bot, P., Le Comportement Thermique des Semi-Cristallins Injectes. Application a la Prediction des Retraits, PhD, University of Nantes, Nantes, France, 1998.
-
Boutaous, M., Bourgin, P., and Zinet, M., Thermally and Flow Induced Crystallization of Polymers at Low Shear Rate, J. Non-Newtonian FluidMech., vol. 165, nos. 5-6, pp. 227-237,2010a.
-
Boutaous, M., Brahmia, N., and Bourgin, P., Parametric Study of the Crystallization Kinetics of a Semi-Crystalline Polymer during Cooling, C. R. Mecanique, vol. 338, no. 2, pp. 78-84,2010b.
-
Eder, G., Janeschitz-Kriegl, H., and Liedauer, S., Crystallization Processes in Quiescent and Moving Polymer Melts under Heat Transfer Conditions, Prog. Polym. Sci., vol. 15, no. 4, pp. 629-714,1990.
-
Hadinata, C., Gabriel, C., Ruellmann, M., Kao, N., and Laun, H.M., Shear-Induced Crystallization of PB-1 up to Processing-Relevant Shear Rates, Rheol. Acta, vol. 45, no. 5, pp. 539-546,2006.
-
Keller, A. and Kolnaar, H.W.H., Flow-Induced Orientation and Structure Formation, in Materials Science and Technology, Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2006.
-
Kim, S.K. and Jeong, A., Numerical Simulation of Crystal Growth in Injection Molded Thermoplastics based on Monte Carlo Method with Shear Rate Tracking, Int. J. Precision Eng. Manuf., vol. 20, no. 4, pp. 641-650,2019.
-
Kolmogorov, A.N., On the Statistical Theory of the Crystallization of Metals, Bull. Acad. Sci. USSR, Division Math., vol. 3, no. 1, pp. 355-359,1937.
-
Koscher, E. and Fulchiron, R., Influence of Shear on Polypropylene Crystallization: Morphology Development and Kinetics, Polymer, vol. 43, no. 25, pp. 6931-6942,2002.
-
Laschet, G., Spekowius, M., Spina, R., and Hopmann, C., Multiscale Simulation to Predict Microstructure Dependent Effective Elastic Properties of an Injection Molded Polypropylene Component, Mech. Mater., vol. 105, pp. 123-137,2017.
-
Mitsoulis, E. and Zisis, T., Tanner's Simple Model of Crystallization for Power-Law Fluids Extended, AIP Conf. Proc., vol. 1593, pp. 596-599,2014.
-
Mu, Y., Zhao, G., Chen, A., Dong, G., and Li, S., Numerical Investigation of the Crystallization and Orientation Behavior in Polymer Processing with a Two-Phase Model, Comput. Chem. Eng., vol. 63, pp. 91-107,2014.?.
-
Patankar, S.V., Numerical Heat Transfer and Fluid Flow, New York: Hemisphere Publishing Corp., 1980.
-
Schneider, W., Koppl, A., and Berger, J., Non-Isothermal Crystallization of Polymers, Int. Polym. Proc, vol. 2, nos. 3-4, pp. 151-154,1988.
-
Spina, R., Spekowius, M., and Hopmann, C., Multiphysics Simulation of Thermoplastic Polymer Crystallization, Mater. Des., vol. 95, pp. 455-469,2016.
-
Spina, R., Spekowius, M., and Hopmann, C., Simulation of Crystallization of Isotactic Polypropylene with Different Shear Regimes, Thermochim. Acta, vol. 659, pp. 44-54,2018.
-
Tanner, R.I., A Suspension Model for Low Shear Rate Polymer Solidification, J. Non-Newtonian Fluid Mech, vol. 102, no. 2, pp. 397-408,2002.
-
Tanner, R.I. and Qi, F., A Comparison of Some Models for Describing Polymer Crystallization at Low Deformation Rates, J. Non-Newtonian Fluid Mech, vol. 127, nos. 2-3, pp. 131-141,2005.
-
Vasenin, I.M., Sidonsky, O.B., and Shrager, G.R., Numerical Solution of the Problem of the Motion of a Viscous Fluid with a Free Surface, Proc. USSR Acad. Sci., vol. 217, no. 2, pp. 295-298,1974.
-
Wassner, E. and Maier, R.D., Shear-Induced Crystallization of Polypropylene Melts, in Proc. of the 13th Intl. Congress on Rheology, Cambridge, UK, 2000.
-
Wo, D.L., Tanner, R.I., and Fletcher, D.F., A Numerical Treatment of Crystallization in Tube Flow, Polym. Eng. Sci., vol. 52, no. 6, pp. 1356-1366,2012.
-
Zinet, M., Otmani, R.E., Boutaous, M., and Chantrenne, P., A Numerical Model for Non-Isothermal Flow Induced Crystallization in Thermoplastic Polymers, Proc. of the ASME 2009 Intl. Mech. Eng. Congress Exposition, Lake Buena Vista, FL, vol. 9, pp. 23-32,2009.
-
Favorskaya Margarita N., Nikitin Ilia S., Severina Natalia S., Advances in Computational Study of Dynamic Systems, in Advances in Theory and Practice of Computational Mechanics, 274, 2022. Crossref
-
Borzenko Evgeny I., Shrager Gennady R., Kinematics of the Plane Channel Filling with a Polymer Fluid Taking into Account the Curing Process, in Advances in Theory and Practice of Computational Mechanics, 274, 2022. Crossref