Доступ предоставлен для: Guest
Главная ICHMT DL Текущий год Архив Исполнительный Комитет ICHMT

Numerical Simulation of a Practical Chemical Vapor Deposition Reactor

DOI: 10.1615/ICHMT.2015.IntSympAdvComputHeatTransf.1020
pages 1107-1119

S. Wong
Department of Mechanical and Aerospace Engineering, Rutgers, The State University of New Jersey Piscataway, NJ, 08854, USA

Yogesh Jaluria
Department of Mechanical and Aerospace Engineering Rutgers-New Brunswick, The State University of New Jersey Piscataway, NJ 08854, USA

Аннотация

Numerical Simulation was set up to study a rotating vertical impinging chemical vapor deposition (CVD) system for the fabrication of thin films. As the demand for high powered electronics and high-efficiency lighting increases, it is important to look at the quality and characteristics of these thin films, such as the growth rate, microstructure and uniformity. It has been becoming more and more costly for manufacturer to produce these high potent thin films due to the excessive waste of materials and high energy costs. A numerical study can be used to model and optimize the CVD reactor to yield favorable operating conditions. For this study, a simple geometry, consisting of a rotating susceptor and flow guide, is considered. Using only the carrier gases, we can model how the flow enters, spreads over the susceptor and exits the chamber. The study will also show visually how the temperature changes as the carrier gases react to the thermal transport. The surface heat transfer can be related to the deposition rate, which requires inclusion of the reaction kinetics. Further assessment of the system will show the effects of rotation and buoyancy. A three-dimensional model is used due to the rotating susceptor. The results are expected to lead to a better understanding of the basic mechanisms for predicting and optimizing the operating conditions that can be used in an experimental study. Commercially available software is used and the results obtained are discussed in detail.

ICHMT Digital Library

Bow shocks on a jet-like solid body shape. Thermal Sciences 2004, 2004. Pulsed, supersonic fuel jets - their characteristics and potential for improved diesel engine injection. PULSED, SUPERSONIC FUEL JETS - THEIR CHARACTERISTICS AND POTENTIAL FOR IMPROVED DIESEL ENGINE INJECTION
View of engine compartment components (left). Plots of temperature distributions in centreplane, forward of engine (right). CHT-04 - Advances in Computational Heat Transfer III, 2004. Devel... DEVELOPMENT AND CURRENT STATUS OF INDUSTRIAL THERMOFLUIDS CFD ANALYSIS
Pratt & Whitney's F-135 Joint Strike Fighter Engine under test in Florida is a 3600F class jet engine. TURBINE-09, 2009. Turbine airfoil leading edge stagnation aerodynamics and heat transfe... TURBINE AIRFOIL LEADING EDGE STAGNATION AERODYNAMICS AND HEAT TRANSFER - A REVIEW
Refractive index reconstructed field. (a) Second iteration. (b) Fourth iteration. Radiative Transfer - VI, 2010. Theoretical development for refractive index reconstruction from a radiative ... THEORETICAL DEVELOPMENT FOR REFRACTIVE INDEX RECONSTRUCTION FROM A RADIATIVE TRANSFER EQUATION-BASED ALGORITHM
Two inclusion test, four collimated sources. Radiative Transfer - VI, 2010. New developments in frequency domain optical tomography. Part II. Application with a L-BFGS associated to an inexa... NEW DEVELOPMENTS IN FREQUENCY DOMAIN OPTICAL TOMOGRAPHY. PART II. APPLICATION WITH A L-BFGS ASSOCIATED TO AN INEXACT LINE SEARCH