Доступ предоставлен для: Guest
Главная ICHMT DL Текущий год Архив Исполнительный Комитет ICHMT

Thermally Developed Flow in Open-Cell Foams: A Pore-Scale Analysis

DOI: 10.1615/ICHMT.2017.CHT-7.100
pages 65-75

Marcello Iasiello
Dipartimento di Ingegneria Industriale, Università degli studi di Napoli Federico II, P.le Tecchio 80, 80125, Napoli, Italy

Salvatore Cunsolo
Dipartimento di Ingegneria Industriale, Università degli Studi di Napoli Federico II, Napoli, Italy; LaMCos, INSA-Lyon, UMR CNRS 5259, Villeurbanne, France

Nicola Bianco
Dipartimento di Ingegneria Industriale, Università degli studi di Napoli Federico II, P.le Tecchio 80, 80125, Napoli, Italy

Wilson K. S. Chiu
Department of Mechanical Engineering, University of Connecticut, 191 Auditorium Road, Storrs, CT, 06269-3139, USA

Vincenzo Naso
Dipartimento di Ingegneria Industriale, Università degli studi di Napoli Federico II, P.le Tecchio 80, 80125, Napoli, Italy

Аннотация

Convection heat transfer in open cell foams plays a primary role when a significant local temperature difference exists between the solid matrix and the fluid that passes through it. Recently, it has been recognized that the flow thermally develops after a few cells, for both uniform temperature and heat flux conditions at the solid/fluid interface. Convection heat transfer in thermally developed flow at the pore scale in foams, that so far has received limited attention in the literature, is investigated numerically in this paper. The open cell foam geometry is built up with reference to Kelvin’s tetrakaidecahedron foam. The velocity, pressure and temperature fields are predicted with a finite scheme, for different porosities and Reynolds numbers. Results show that convection heat transfer has a periodical behavior through the single developed cell, with local values affected by porosity and Reynolds number. Details are given about the variation of the local convection heat transfer over the solid/fluid interface.

ICHMT Digital Library

Bow shocks on a jet-like solid body shape. Thermal Sciences 2004, 2004. Pulsed, supersonic fuel jets - their characteristics and potential for improved diesel engine injection. PULSED, SUPERSONIC FUEL JETS - THEIR CHARACTERISTICS AND POTENTIAL FOR IMPROVED DIESEL ENGINE INJECTION
View of engine compartment components (left). Plots of temperature distributions in centreplane, forward of engine (right). CHT-04 - Advances in Computational Heat Transfer III, 2004. Devel... DEVELOPMENT AND CURRENT STATUS OF INDUSTRIAL THERMOFLUIDS CFD ANALYSIS
Pratt & Whitney's F-135 Joint Strike Fighter Engine under test in Florida is a 3600F class jet engine. TURBINE-09, 2009. Turbine airfoil leading edge stagnation aerodynamics and heat transfe... TURBINE AIRFOIL LEADING EDGE STAGNATION AERODYNAMICS AND HEAT TRANSFER - A REVIEW
Refractive index reconstructed field. (a) Second iteration. (b) Fourth iteration. Radiative Transfer - VI, 2010. Theoretical development for refractive index reconstruction from a radiative ... THEORETICAL DEVELOPMENT FOR REFRACTIVE INDEX RECONSTRUCTION FROM A RADIATIVE TRANSFER EQUATION-BASED ALGORITHM
Two inclusion test, four collimated sources. Radiative Transfer - VI, 2010. New developments in frequency domain optical tomography. Part II. Application with a L-BFGS associated to an inexa... NEW DEVELOPMENTS IN FREQUENCY DOMAIN OPTICAL TOMOGRAPHY. PART II. APPLICATION WITH A L-BFGS ASSOCIATED TO AN INEXACT LINE SEARCH