Доступ предоставлен для: Guest
Главная ICHMT DL Текущий год Архив Исполнительный Комитет ICHMT


DOI: 10.1615/ICHMT.2014.IntSympConvHeatMassTransf.400
pages 543-552

Dadui C. Guerrieri
Mechanical Eng. Dept. - CEFET-RJ UnED Itaguai, Rio de Janeiro, Brazil

Carolina Palma Naveira-Cotta
Laboratory of Nano- and Microfluidics and Microsystems, LabMEMS, Mechanical Engineering Department and Nanotechnology Engineering Dept., POLI & COPPE, Universidade Federal do Rio de Janeiro, Cidade Universitária, Cx. Postal 68503, Rio de Janeiro, RJ, CEP 21945-970, Brazil; Mechanical Engineering Department, University College London, UCL, United Kingdom


HCPV (High Concentration Photovoltaic) systems operate more efficiently once the solar cell is kept cooled by suitable heat sinks. Most of the commercial HCPV systems are based on passive air-cooling systems, especially due to their simplicity and robustness, while here an alternative approach is considered to remove heat more efficiently from the photovoltaic cell, replacing the passive air-cooled system with an active water-cooled one, and also allowing the re-use of the removed heat in a secondary circuit for other purposes, such as water desalination. In this context, this work presents the manufacturing process, the experimental procedure and theoretical analysis of an optimized micro heat exchanger for active cooling of a commercial HCPV module that concentrates 1200 suns, using water as the working fluid. The optimized micro-heat exchanger, with 18 micro-channels of 400μm in width and 945μm in depth each, was manufactured in copper using a CNC micro-milling machine and then characterized in a 3D digital microscope. An experimental apparatus was assembled to analyze the proposed micro-heat exchanger in both controlled and realistic situations, comprised in four distinct experimental runs. A non-intrusive infrared camera thermography system has been employed to measure the temperature at the external surface of the micro-heat exchanger substrate, while in the theoretical study the commercial simulation platform COMSOL Multiphysics 4.2a was adopted, allowing for critical comparisons of experimental and theoretical findings.

ICHMT Digital Library

Bow shocks on a jet-like solid body shape. Thermal Sciences 2004, 2004. Pulsed, supersonic fuel jets - their characteristics and potential for improved diesel engine injection. PULSED, SUPERSONIC FUEL JETS - THEIR CHARACTERISTICS AND POTENTIAL FOR IMPROVED DIESEL ENGINE INJECTION
View of engine compartment components (left). Plots of temperature distributions in centreplane, forward of engine (right). CHT-04 - Advances in Computational Heat Transfer III, 2004. Devel... DEVELOPMENT AND CURRENT STATUS OF INDUSTRIAL THERMOFLUIDS CFD ANALYSIS
Pratt & Whitney's F-135 Joint Strike Fighter Engine under test in Florida is a 3600F class jet engine. TURBINE-09, 2009. Turbine airfoil leading edge stagnation aerodynamics and heat transfe... TURBINE AIRFOIL LEADING EDGE STAGNATION AERODYNAMICS AND HEAT TRANSFER - A REVIEW
Refractive index reconstructed field. (a) Second iteration. (b) Fourth iteration. Radiative Transfer - VI, 2010. Theoretical development for refractive index reconstruction from a radiative ... THEORETICAL DEVELOPMENT FOR REFRACTIVE INDEX RECONSTRUCTION FROM A RADIATIVE TRANSFER EQUATION-BASED ALGORITHM
Two inclusion test, four collimated sources. Radiative Transfer - VI, 2010. New developments in frequency domain optical tomography. Part II. Application with a L-BFGS associated to an inexa... NEW DEVELOPMENTS IN FREQUENCY DOMAIN OPTICAL TOMOGRAPHY. PART II. APPLICATION WITH A L-BFGS ASSOCIATED TO AN INEXACT LINE SEARCH