每年出版 12 期
ISSN 打印: 0040-2508
ISSN 在线: 1943-6009
Indexed in
SUPPRESSING THE EFFECTS OF INTERFERING FACTORS IN LOCAL MICROWAVE DIAGNOSTICS
摘要
New principles for the development of measuring procedures in the local microwave diagnostics on the base of aperture resonator measuring converters (ARMC) are justified. A main problem to be solved is to avoid the interfering factors, which exert influence on the measuring results, such as nonreproducibility of the gap between the object and the ARMC aperture plane, aperture geometry, surface shape and object density, nonreproducibility of microwave oscillator and detector parameters etc. This problem can be solved by forming special combined signals based on the usually applied fundamental primary signals, e.g. ARMC resonance frequency and Q change under the object action. In turn, it is proposed to extract these signals via the AFC microwave oscillator by the ARMC resonance frequency. The dependences of fundamental and combined signals on some typical interfering factors are given and the regions with the proposed combined signals invariant to them are denoted. The functional diagram of a universal technical tool for the proposed principle realization is presented.
-
Gordienko Yu.Ye., Shcherban I.M., Levchenko A.V., Lepikh Ya. I., Electrophysical Parameters Image Decoding in Scanning Microwave Microscopy, 2018 International Conference on Information and Telecommunication Technologies and Radio Electronics (UkrMiCo), 2018. Crossref