每年出版 4 期
ISSN 打印: 2152-2057
ISSN 在线: 2152-2073
IF:
0.2
5-Year IF:
0.3
Eigenfactor:
0.00004
JCI:
0.08
SJR:
0.153
SNIP:
0.178
CiteScore™::
1
H-Index:
12
Indexed in
MECHANICAL AND TRIBOLOGICAL PROPERTIES OF POLYMER MATERIALS BASED ON HETEROMETALLIC Fe(III)Co(II) POLYACRYLAMIDE COMPLEXES
Get access
摘要
The article presents research data on the mechanical and tribological properties of composite materials based on bimetallic FeCo polyacrylamide complexes (FeCoPolyAAm), obtained by frontal polymerization, and low density polyethylene (LDPE). The results of the study of tensile strength σB, elastic modulus E, relative elongation ε, friction coefficient, wear coefficient under burst loading are presented. It is shown that the addition of FeCoPolyAAm particles with a concentration of 1 wt.% into an organic matrix contributes to a decrease in the wear of the friction pair by 2.5 times in comparison with the wear during friction of LDPE, which correlates with the results of antifriction tests.
-
Avalle, M. and Romanello, E., Tribological Characterization of Modified Polymeric Blends, J. Proc. Struct. Integ., vol. 8, pp. 239-255, 2018.
-
Bloom, P.D., Baikerikar, K.G., Anderegg, J.W., and Sheares, V.V., Fabrication and Wear Resistance of Al-Cu-Fe Quasicrystal-Epoxy Composite Materials, J. Mater. Sci. Eng. A, vol. 360, nos. 1-2, pp. 46-57, 2003.
-
Bloom, P.D., Baikerikar, K.G., Otaigbe, J.U., and Sheares, V.V., Development of Novel Polymer/Quasi-crystal Composite Materials, J. Mater. Sci. Eng. A, vol. 294, pp. 156-159, 2000.
-
Burris, D.L., Boesl, B., Bourne, G.R., and Sawyer, W.G., Polymeric Nanocomposites for Tribological Applications, J. Macromol. Mater. Eng., vol. 292, pp. 387-402, 2007.
-
Bushan, B. (Ed.), Handbook of Micro/Nano Tribology, Boca Raton, FL: CRC Press, 2020.
-
Cabrol, E., Boher, C., Vidal, V., Rezai-Aria, F., and Touratier, F., A Correlation between Tribological Behavior and Crystal Structure of Cobalt-Based Hardfacings, J. Wear, vol. 426, pp. 996-1007, 2019.
-
Carotenuto, G., De, Nicola, S., Palomba, M., Pullini, D., Horsewell, A., Hansen, T.W., and Nicolais, L., Mechanical Properties of Low-Density Polyethylene Filled by Graphite Nanoplatelets, J. Nanotechnol., vol. 23, no. 48, p. 485705, 2012.
-
Dabees, S., Elshalakany, A.B., Tirth, V., and Kamel, B.M., Synthesis and Characterization Studies of High-Density Polyethylene-Based Nanocomposites with Enhanced Surface Energy, Tribological, and Electrical Properties, J. Polym. Test., vol. 98, p. 107193, 2021.
-
Fevzi Ozaydin, M. and Liang, H., Design and Synthesis of a Geopolymer-Enhanced Quasi-Crystalline Composite for Resisting Wear and Corrosion, J. Tribol., vol. 138, no. 2, p. 021601, 2016.
-
Friedrich, K., Polymer Composites for Tribological Applications, J. Adv. Ind. Eng. Polym. Res., vol. 1, no. 1, pp. 3-39, 2018.
-
Fu, S.Y., Feng, X.Q., Lauke, B., and Mai, Y.W., Effects of Particle Size, Particle/Matrix Interface Adhesion and Particle Loading on Mechanical Properties of Particulate-Polymer Composites, J. Compos. Part B: Eng., vol. 39, no. 6, pp. 933-961, 2008.
-
Hu, H., Yu, S., Wang, M., and Liu, K., Tribological Behavior of Polyamide 66-Based Binary and Ternary Composites, J. Polym. Eng. Sci., vol. 49, no. 12, pp. 2454-2458, 2009.
-
Huang, J., Li, Y., Jia, X., and Song, H., Preparation and Tribological Properties of Core-Shell Fe3O4C Microspheres, J. Tribol. Int., vol. 129, pp. 427-435, 2019.
-
Jia, B.B., Li, T.S., Liu, X.J., and Cong, P.H., Tribological Behaviors of Several Polymer-Polymer Sliding Combinations under Dry Friction and Oil-Lubricated Conditions, J. Wear, vol. 262, nos. 11-12, pp. 1353-1359, 2007.
-
Jin, S.E., Hwang, W., Lee, H.J., and Jin, H.E., Dual UV Irradiation-Based Metal Oxide Nanoparticles for Enhanced Antimicrobial Activity in Escherichia Coli and M13 Bacteriophage, Int. J. Nanomedicine, vol. 12, pp. 8057-8070, 2017.
-
Kan, W.H. and Chang, L., The Mechanisms behind the Tribological Behavior of Polymer Matrix Composites Reinforced with TiO2 Nanoparticles, J. Wear, vol. 474, p. 203754, 2021.
-
Karami, P. and Shojaei, A., Improvement of Dry Sliding Tribological Properties of Polyamide 6 Using Diamond Nanoparticles, J. Tribol. Int., vol. 115, pp. 370-377, 2017.
-
Lee, C.Y., Tai, N.H., Sheu, H.S., Chiu, H.T., and Hsieh, S.H., The Formation of Perovskite PbTiO3 Powders by Sol-Gel Process, J. Mater. Chem. Phys., vol. 97, nos. 2-3, pp. 468-471, 2006.
-
Paszkiewicz, S., Pypec, K., Irska, I., and Piesowicz, E., Functional Polymer Hybrid Nanocomposites Based on Polyolefins: A Review, J. Processes, vol. 8, no. 11, p. 1475, 2020.
-
Paszkiewicz, S., Szymczyk, A., Pawlikowska, D., Subocz, J., Zenker, M., and Masztak, R., Electrically and Thermally Conductive Low Density Polyethylene-Based Nanocomposites Reinforced by MWCNT or Hybrid MWCNT/Graphene Nanoplatelets with Improved Thermo-Oxidative Stability, J. Nanomater., vol. 8, no. 4, p. 264, 2018.
-
Padgurskas, J., Rukuiza, R., Prosycevas, I., and Kreivaitis, R., Tribological Properties of Lubricant Additives of Fe, Cu and Co Nanoparticles, J. Tribol. Int., vol. 60, pp. 224-232, 2013.
-
Pomogailo, A.D. and Dzhardimalieva, G.I., Nanostructured Materials Preparation via Condensation Ways, Rotterdam, Netherlands: Springer, pp. 13-89, 2014.
-
Pomogailo, A.D. and Dzhardimalieva, G.I., Structure and Magnetic Properties of Polymer Matrix Nano-composite Processed by Pyrolysis of Cobalt (II) Acrylate, J. Alloys Compd., vol. 369, nos. 1-2, pp. 244-246, 2004.
-
Pomogailo, A.D., Dzhardimalieva, G.I., Rozenberg, A.S., and Muraviev, D.N., Kinetics and Mechanism of in situ Simultaneous Formation of Metal Nanoparticles in Stabilizing Polymer Matrix, J. Nanopart. Res., vol. 5, no. 5, pp. 497-519, 2003.
-
Shi, S.C. and Jiang, S.Z., Influence of Graphene/Copper Hybrid Nanoparticle Additives on Tribological Properties of Solid Cellulose Lubricants, J. Surf. Coat. Technol., vol. 389, p. 125655, 2020.
-
Sowka, E., Leonowicz, M., Kazmierczak, J., Slawska-Waniewska, A., Pomogailo, A.D., and Dzhardimalieva, G.I., Formation of Cobalt Nanoparticles in Inorganic Matrix by Frontal Polymerisation and Thermolysis of Metal-Containing Monomers, J. Phys. B Condens. Matter, vol. 384, nos. 1-2, pp. 282-285, 2006.
-
Theivasanthi, T., Kartheeswari, N., and Alagar, M., Chemical Precipitation Synthesis of Ferric Chloride Doped Zinc Sulphide Nanoparticles and Their Characterization Studies, J. Chem. Sci. Trans., vol. 2, pp. 497-507, 2013.
-
Uflyand, I.E., Drogan, E.G., Burlakova, V.E., Kydralieva, K.A., Shershneva, I.N., and Dzhardimalieva, G.I., Testing the Mechanical and Tribological Properties of New Metal-Polymer Nanocomposite Materials Based on Linear Low-Density Polyethylene and Al65Cu22Fe13 Quasicrystals, J. Polym. Test., vol. 74, pp. 178-186, 2019a.
-
Uflyand, I.E., Zhinzhilo, V.A., and Dzhardimalieva, G.I., New Example of Metal-Containing Monomers for Frontal Polymerization, ChemistrySelect J., vol. 4, no. 7, pp. 2105-2108, 2019b.
-
Xia, X., Cai, S., and Xie, C., Preparation, Structure and Thermal Stability of Cu/LDPE Nanocomposites, J. Mater. Chem. Phys., vol. 95, no. 1, pp. 122-129, 2006.
-
Uflyand Igor E., Burlakova Victoria E., Drogan Ekaterina G., Zabiyaka Igor Yu., Kydralieva Kamila A., Kugabaeva Gulsara D., Dzhardimalieva Gulzhian I., Preparation of FeCo/C-N and FeNi/C-N Nanocomposites from Acrylamide Co-Crystallizates and Their Use as Lubricant Additives, Micromachines, 13, 11, 2022. Crossref