每年出版 8 期
ISSN 打印: 1065-5131
ISSN 在线: 1563-5074
Indexed in
PERFORMANCE CHARACTERISTICS OF DEEP CORRUGATED TUBES WITH TWISTED-TAPE INSERTS
摘要
Recent investigation of the performance characteristics of some passive compound heat transfer enhancement techniques revealed that the combination of corrugated tubes with twisted-tape inserts seems to be a very attractive enhancement technique for single-phase turbulent flow. This holds in the range of height-to-diameter ratios e/Di > 0.04 and small relative pitches of the twisted tape, H/Di. This paper presents the latest results of an experimental investigation of the friction factors and heat transfer coefficients (inside with water as working fluid and outside with condensing steam) of eight single-start, spirally corrugated tubes with geometrical parameters: 0.053 < e/Di < 0.089 and ridge pitch-to-height ratio 6.8 < p/e < 11.0 combined with twisted tapes with H/Di = 4.7, 5.7, and 7.6, in the range of Reynolds number, 3.5 × 103 < Re < 5.0 × 104. The increase of outside heat transfer coefficient E0 is presented as a function of geometrical parameters of the depth of the corrugated tube through the Weber number, We, and the relative pitch of the twisted tape H/Di. The effect of Reynolds number on E0 is discussed.
-
Saha Subhankar, Saha Sujoy Kumar, Enhancement of heat transfer of laminar flow through a circular tube having integral helical rib roughness and fitted with wavy strip inserts, Experimental Thermal and Fluid Science, 50, 2013. Crossref
-
Hong Yuxiang, Du Juan, Wang Shuangfeng, Experimental heat transfer and flow characteristics in a spiral grooved tube with overlapped large/small twin twisted tapes, International Journal of Heat and Mass Transfer, 106, 2017. Crossref
-
Promthaisong P., Jedsadaratanachai W., Eiamsa-ard S., 3D Numerical study on the flow topology and heat transfer characteristics of turbulent forced convection in spirally corrugated tube, Numerical Heat Transfer, Part A: Applications, 69, 6, 2016. Crossref
-
Eiamsa-ard S., Promthaisong P., Thianpong C., Pimsarn M., Chuwattanakul V., Influence of three-start spirally twisted tube combined with triple-channel twisted tape insert on heat transfer enhancement, Chemical Engineering and Processing: Process Intensification, 102, 2016. Crossref
-
Manglik Raj M., Enhancement of Convective Heat Transfer, in Handbook of Thermal Science and Engineering, 2017. Crossref
-
Zhang Dongwei, Tao Hanzhong, Xu Yuan, Sun Zishuai, Numerical investigation on flow and heat transfer characteristics of corrugated tubes with non-uniform corrugation in turbulent flow, Chinese Journal of Chemical Engineering, 26, 3, 2018. Crossref
-
Manglik Raj M., Enhancement of Convective Heat Transfer, in Handbook of Thermal Science and Engineering, 2018. Crossref
-
Wang Wei, Zhang Yaning, Liu Jian, Li Bingxi, Sundén Bengt, Numerical investigation of entropy generation of turbulent flow in a novel outward corrugated tube, International Journal of Heat and Mass Transfer, 126, 2018. Crossref
-
Saha Sujoy Kumar, Ranjan Hrishiraj, Emani Madhu Sruthi, Bharti Anand Kumar, Heat Transfer Fundamentals for Design of Heat Transfer Enhancement Devices, in Introduction to Enhanced Heat Transfer, 2020. Crossref
-
Zhang Guohua, Liu Xueting, Sundén Bengt Ake, Xie Gongnan, Computational analysis of span-wise hole locations on fluid flow and film cooling of internal channels with crescent ribs, International Journal of Numerical Methods for Heat & Fluid Flow, 29, 8, 2019. Crossref
-
Saha Sujoy Kumar, Ranjan Hrishiraj, Emani Madhu Sruthi, Bharti Anand Kumar, Compound Techniques, in Insert Devices and Integral Roughness in Heat Transfer Enhancement, 2020. Crossref
-
Saha Sujoy Kumar, Ranjan Hrishiraj, Emani Madhu Sruthi, Bharti Anand Kumar, Performance Evaluation Criteria Based on Laws of Thermodynamics, in Performance Evaluation Criteria in Heat Transfer Enhancement, 2020. Crossref
-
Qian Jin-yuan, Yang Chen, Wu Zan, Liu Xue-ling, Gao Xiao-fei, Jin Zhi-jiang, Sunden Bengt, Analysis of Fouling in Six-Start Spirally Corrugated Tubes, Heat Transfer Engineering, 41, 22, 2020. Crossref
-
Han Huaizhi, Yu Ruitian, Li Bingxi, Zhang Yaning, Wang Wei, Chen Xin, Multi-objective optimization of corrugated tube with loose-fit twisted tape using RSM and NSGA-II, International Journal of Heat and Mass Transfer, 131, 2019. Crossref
-
Liao Wenling, Luo Yaqin, Chen Tingbin, Thermal-hydraulic performance analysis of outward convex corrugated tubes based on skewness and kurtosis, International Journal of Thermal Sciences, 165, 2021. Crossref
-
Hassan Muhammed A., Kassem Mahmoud A., Kaood Amr, Numerical investigation and multi-criteria optimization of the thermal–hydraulic characteristics of turbulent flow in conical tubes fitted with twisted tape insert, Journal of Thermal Analysis and Calorimetry, 147, 12, 2022. Crossref