每年出版 8 期
ISSN 打印: 1065-5131
ISSN 在线: 1563-5074
Indexed in
PRESSURE DROP IN R-245FA CONDENSATION IN TUBES FITTED WITH COILED-WIRE INSERTS
摘要
This study examines pressure drop during condensation of R-245fa pure vapor inside two separate horizontal coaxial double-pipe test sections with coiled-wire inserts assembled in series. For each inserted tube and the plain tube, data were collected for mass fluxes in the range of 100 to 250 kg/m2s in increments of 50 kg/m2s for vapor qualities ranging from 0.1 to 0.9. It was observed that the pressure drop inside a horizontal tube is a complex function of vapor quality, mass velocity, and coil pitch, and in a low vapor quality region. The highest pressure drop ratio was 13.33 for a coil pitch of 3.0 mm at a refrigerant mass flux of 150 kg/m2s.
-
Emani Madhu Sruthi, Ranjan Hrishiraj, Bharti Anand Kumar, Meyer Josua P., Saha Sujoy Kumar, Laminar flow heat transfer enhancement in square and rectangular channels having: (1) A wire-coil, axial and spiral corrugation combined with helical screw-tape with and without oblique teeth and a (2) spiral corrugation combined with twisted tapes with oblique teeth, International Journal of Heat and Mass Transfer, 144, 2019. Crossref
-
Saha Sujoy Kumar, Ranjan Hrishiraj, Emani Madhu Sruthi, Bharti Anand Kumar, Displaced Enhancement Devices and Wire Coil Inserts, in Insert Devices and Integral Roughness in Heat Transfer Enhancement, 2020. Crossref