每年出版 6 期
ISSN 打印: 1543-1649
ISSN 在线: 1940-4352
Indexed in
STATISTICAL EXTRACTION OF PROCESS ZONES AND REPRESENTATIVE SUBSPACES IN FRACTURE OF RANDOM COMPOSITES
摘要
We propose to identify process zones in heterogeneous materials by tailored statistical tools. The process zone is redefined as the part of the structure where the random process cannot be correctly approximated in a low-dimensional deterministic space. Such a low-dimensional space is obtained by a spectral analysis performed on precomputed solution samples. A greedy algorithm is proposed to identify both process zone and low-dimensional representative subspace for the solution in the complementary region. In addition to the novelty of the tools proposed in this paper for the analysis of localized phenomena, we show that the reduced space generated by the method is a valid basis for the construction of a reduced-order model.
-
Abdi, H. and Williams, L. J., Principal component analysis. DOI: 10.1002/wics.101
-
Allix, O., Lévêque, D., and Perret, L., Identification and forecast of delamination in composite laminates by an interlaminar interface model. DOI: 10.1016/S0266-3538(97)00144-9
-
Allix, O., Kerfriden, P., and Gosselet, P., A relocalization technique for the multiscale computation of delamination in composite structures.
-
Ammar, A., Chinesta, F., and Cueto, E., Coupling finite elements and proper generalized decompositions. DOI: 10.1615/IntJMultCompEng.v9.i1.30
-
Antoulas, C. and Sorensen, D. C., Approximation of large-scale dynamical systems: An overview.
-
Astrid, P., Weiland, S., Willcox, K., and Backx, A. C. P. M., Missing point estimation in models described by proper orthogonal decomposition. DOI: 10.1109/CDC.2004.1430301
-
Barbone, P. E., Givoli, D., and Patlashenko, I., Optimal modal reduction of vibrating substructures. DOI: 10.1002/nme.680
-
Barrault, M., Maday, Y., Nguyen, N. C., and Patera, A. T., An “empirical interpolation” method: Application to efficient reduced-basis discretization of partial differential equations. DOI: 10.1016/j.crma.2004.08.006
-
Belytschko, T., Loehnert, S., and Song, J.-H., Multiscale aggregating discontinuities: A method for circumventing loss of material stability. DOI: 10.1002/nme.2156
-
Bradley, E. and Gong, G., A leisurely look at the bootstrap, the jackknife, and cross-validation. DOI: 10.2307/2685844
-
Buffoni, M., Telib, H., and Iollo, A., Iterative methods for model reduction by domain decomposition. DOI: 10.1016/j.compfluid.2008.11.008
-
Cangelosi, R. and Goriely, A., Component retention in principal component analysis with application to cdna microarray data. DOI: 10.1186/1745-6150-2-2
-
Carlberg, K., Bou-Mosleh, C., and Farhat, C., Efficient non-linear model reduction via a least-squares Petrov–Galerkin projection and compressive tensor approximations. DOI: 10.1002/nme.3050
-
Chaboche, J.-L., Continuum damage mechanics: Part I - General concepts; Part II - Damage growth, crack initiation, and crack growth. DOI: 10.1115/1.3173661
-
Chevreuil, M. and Nouy, A., Model order reduction based on proper generalized decomposition for the propagation of uncertainties in structural dynamics. DOI: 10.1002/nme.3249
-
Coenen, E. W. C., Kouznetsova, V. G., and Geers, M. G. D., Novel boundary conditions for strain localization analyses in microstructural volume elements. DOI: 10.1002/nme.3298
-
Filzmoser, P., Liebmann, B., and Varmuza, K., Repeated double cross validation. DOI: 10.1002/cem.1225
-
Grassl, P. and Bazant, Z. P., Random Lattice particle simulation of statistical size effect in quasibrittle structures failing at crack initiation. DOI: 10.1061/(ASCE)0733-9399(2009)135:2(85)
-
Haryadi, S. G., Kapania, R. K., and Haryadi, S. G., Global/local analysis of composite plates with cracks. DOI: 10.1016/S1359-8368(97)00034-6
-
Hotelling, H., Analysis of a complex of statistical variables into principal components. DOI: 10.1037/h0071325
-
Huttenlocher, D. P., Klanderman, G. A., Kl, G. A., and Rucklidge, W. J., Comparing images using the Hausdorff distance. DOI: 10.1109/34.232073
-
Jackson, D. A., Stopping rules in principal components analysis: A comparison of heuristical and statistical approaches. DOI: 10.2307/1939574
-
Karihaloo, B. L., Shao, P. F., and Xiao, Q. Z., Lattice modelling of the failure of particle composites. DOI: 10.1016/S0013-7944(03)00004-3
-
Kerfriden, P., Passieux, J. C., and Bordas, S., Local/global model order reduction strategy for the simulation of quasi-brittle fracture. DOI: 10.1002/nme.3234
-
Kerfriden, P., Gosselet, P., Adhikari, S., and Bordas, S., Bridging proper orthogonal decomposition methods and augmented Newton-Krylov algorithms: An adaptive model order reduction for highly nonlinear mechanical problems. DOI: 10.1016/j.cma.2010.10.009
-
Kerfriden, P., Goury, O., Rabczuk, T., and Bordas, S. P. A., A partitioned model order reduction approach to rationalise computational expenses in multiscale fracture mechanics. DOI: 10.1016/j.cma.2012.12.004
-
Koutsouleris, N., Gaser, C., Bottlender, R., Davatzikos, C., Deckerm, P., Jäger, M., Schmitt, G., Reiser, M., Möller, H. J., and Meisenzahl, E. M., Use of neuroanatomical pattern regression to predict the structural brain dynamics of vulnerability and transition to psychosis. DOI: 10.1016/j.schres.2010.08.032
-
Krzanowski, W. J., Cross-validation in principal component analysis. DOI: 10.1007/BF02511446
-
Kunisch, K. and Volkwein, S., Galerkin proper orthogonal decomposition methods for a general equation in fluid dynamics. DOI: 10.1137/S0036142900382612
-
Ladevèze, P. and Lubineau, G., An enhanced mesomodel for laminates based on micromechanics. DOI: 10.1016/S0266-3538(01)00145-2
-
Ladevèze, P., Passieux, J. C., and Néron, D., The Latin multiscale computational method and the proper generalized decomposition. DOI: 10.1016/j.cma.2009.06.023
-
LeGresley, P. A. and Alonso, J. J., Dynamic domain decomposition and error correction for reduced order models. DOI: 10.2514/6.2003-250
-
Liang, Y. C., Lee, H. P., Lim, S. P., Lin, W. Z., Lee, K. H., and Wu, C. G., Proper orthogonal decomposition and its applications - Part I: Theory. DOI: 10.1006/jsvi.2001.4041
-
Lilliu, G. and van Mier, J. G. M., 3D Lattice type fracture model for concrete. DOI: 10.1016/S0013-7944(02)00158-3
-
Lorentz, E. and Badel, P., A new path-following constraint for strain-softening finite element simulations. DOI: 10.1002/nme.971
-
Massart, T. J., Peerlings, R. H. J., and Geers, M. G. D., An enhanced multi-scale approach for masonry wall computations with localization of damage. DOI: 10.1002/nme.1799
-
Meyer, M. and Matthies, H. G., Efficient model reduction in non-linear dynamics using the Karhunen-Loeve expansion and dual-weighted-residual methods. DOI: 10.1007/s00466-002-0404-1
-
Nguyen, V. P., Lloberas-Valls, O., Stroeven, M., and Sluys, L. J., Computational homogenization for multiscale crack modeling: Implementational and computational aspects. DOI: 10.1002/nme.3237
-
Pearson, K., On lines and planes of closest fit to systems of points in space. DOI: 10.1080/14786440109462720
-
Pinho, S. T., Iannucci, L., and Robinson, P., Physically-based failure models and criteria for laminated fibre-reinforced composites with emphasis on fibre kinking: Part I: Development. DOI: 10.1016/j.compositesa.2005.04.016
-
Rabczuk, T., Kim, J. Y., Samaniego, E., and Belytschko, T., Homogenization of sandwich structures. DOI: 10.1002/nme.1100
-
Ravindran, S. S., Reduced-order adaptive controllers for fluid flows using pod. DOI: 10.1023/A:1011184714898
-
Rewienski, M. and White, J., A trajectory piecewise-linear approach to model order reduction and fast simulation of nonlinear circuits and micromachined devices. DOI: 10.1109/TCAD.2002.806601
-
Rickelt, C. and Reese, S., A simulation strategy for life time calculations of large, partially damaged structures. DOI: 10.1007/1-4020-5370-3_605
-
Ryckelynck, D., A priori hyperreduction method: An adaptive approach. DOI: 10.1016/j.jcp.2004.07.015
-
Ryckelynck, D., Hyper-reduction of mechanical models involving internal variables. DOI: 10.1002/nme.2406
-
Sanchez-Palencia, E., Non-homogeneous media and vibration theory. DOI: 10.1007/3-540-10000-8
-
Scrivener, K. L., Crumbie, A. K., and Laugesen, P., The interfacial transition zone (ITZ) between cement paste and aggregate in concrete. DOI: 10.1023/B:INTS.0000042339.92990.4c
-
Sirovich, L., Turbulence and the dynamics of coherent structures. Part I: Coherent structures.
-
Stone, M., Cross-validatory choice and assessment of statistical predictions. DOI: 10.2307/2984809
-
Suquet, P., Elements of homogenization for inelastic solid mechanics. DOI: 10.1007/3-540-17616-0_15
-
van Mier, J. G. M., van Vliet, M. R. A., and Wang, T. K., Fracture mechanisms in particle composites: Statistical aspects in lattice type analysi. DOI: 10.1016/S0167-6636(02)00170-9
-
Walraven, J. C., Aggregate Interlock: A Theoretical and Experimental Analysis.
-
Wold, S., Cross-validatory estimation of the number of components in factor and principal components models. DOI: 10.1080/00401706.1978.10489693
-
Kerfriden P., Ródenas J. J., Bordas S. P.-A., Certification of projection-based reduced order modelling in computational homogenisation by the constitutive relation error, International Journal for Numerical Methods in Engineering, 97, 6, 2014. Crossref
-
PENG QING, CREAN JARED, DEARDEN ALBERT K., HUANG CHEN, WEN XIAODONG, BORDAS STÉPHANE P. A., DE SUVRANU, DEFECT ENGINEERING OF 2D MONATOMIC-LAYER MATERIALS, Modern Physics Letters B, 27, 23, 2013. Crossref
-
Santosh M., Ghosh M.A., Multi-scale identification of concrete material parameters, Theoretical and Applied Fracture Mechanics, 75, 2015. Crossref
-
Rabczuk Timon, Bordas Stéphane P. A., Zi Goangseup, Computational Methods for Fracture, Mathematical Problems in Engineering, 2014, 2014. Crossref
-
Sudhir Sastry Y.B., Budarapu Pattabhi R., Krishna Y., Devaraj S., Studies on ballistic impact of the composite panels, Theoretical and Applied Fracture Mechanics, 72, 2014. Crossref
-
Beex L.A.A., Kerfriden P., Rabczuk T., Bordas S.P.A., Quasicontinuum-based multiscale approaches for plate-like beam lattices experiencing in-plane and out-of-plane deformation, Computer Methods in Applied Mechanics and Engineering, 279, 2014. Crossref
-
Goury Olivier, Amsallem David, Bordas Stéphane Pierre Alain, Liu Wing Kam, Kerfriden Pierre, Automatised selection of load paths to construct reduced-order models in computational damage micromechanics: from dissipation-driven random selection to Bayesian optimization, Computational Mechanics, 58, 2, 2016. Crossref
-
Davey K., Jiang C., Prosser R., Tessellated continuum mechanics: A Galerkin finite element method, Computers & Structures, 175, 2016. Crossref
-
Budarapu P. R., Y B Sudhir Sastry, Natarajan R., Design concepts of an aircraft wing: composite and morphing airfoil with auxetic structures, Frontiers of Structural and Civil Engineering, 10, 4, 2016. Crossref
-
Chakraborty Souvik, Chowdhury Rajib, Galerkin based generalized ANOVA for the solution of stochastic steady state diffusion problems, Probabilistic Engineering Mechanics, 50, 2017. Crossref
-
Agathos Konstantinos, Chatzi Eleni, Bordas Stéphane P. A., Multiple crack detection in 3D using a stable XFEM and global optimization, Computational Mechanics, 62, 4, 2018. Crossref
-
Ley Christophe, Bordas Stéphane P. A., What makes Data Science different? A discussion involving Statistics2.0 and Computational Sciences, International Journal of Data Science and Analytics, 6, 3, 2018. Crossref
-
Budarapu Pattabhi Ramaiah, Zhuang Xiaoying, Rabczuk Timon, Bordas Stephane P.A., Multiscale modeling of material failure: Theory and computational methods, in Advances in Crystals and Elastic Metamaterials, Part 2, 52, 2019. Crossref
-
Gupta Tejendra Kumar, Budarapu Pattabhi Ramaiah, Chappidi Sivakumar Reddy, Y.B. Sudhir Sastry, Paggi Marco, Bordas Stephane P., Advances in Carbon Based Nanomaterials for Bio-Medical Applications, Current Medicinal Chemistry, 26, 38, 2019. Crossref
-
Pereira Álvarez Pablo, Kerfriden Pierre, Ryckelynck David, Robin Vincent, Real-Time Data Assimilation in Welding Operations Using Thermal Imaging and Accelerated High-Fidelity Digital Twinning, Mathematics, 9, 18, 2021. Crossref
-
Chen Li, Beex Lars A.A., Berke Peter Z., Massart Thierry J., Bordas Stéphane P.A., Generalized quasicontinuum modeling of metallic lattices with geometrical and material nonlinearity and variability, Computer Methods in Applied Mechanics and Engineering, 366, 2020. Crossref