每年出版 6 期
ISSN 打印: 1940-2503
ISSN 在线: 1940-2554
Indexed in
EFFECTS OF ASYMMETRICAL CORRUGATION ON FLOW FIELD AND HEAT TRANSFER EFFICIENCY IN CORRUGATED TUBE
摘要
In the present study, the numerical investigation is carried out by using Fluent 15.0 software to analyze the difference between symmetrical corrugation and asymmetrical corrugation on the flow field and the heat transfer efficiency of a corrugated tube in the Reynolds number range of 5000 to 40,000. Additionally, the effects of asymmetrical corrugation depth H and small corrugation radii R on flow field and heat transfer efficiency are discussed. The distributions of streamline, turbulence kinetic energy, and turbulent viscosity are analyzed to reveal the mechanism of flow and heat transfer. The results show that the distribution of small corrugation is the key factor determining the heat transfer efficiency of asymmetrical corrugation (ACT). Compared with symmetrical corrugation (SCT), the heat transfer efficiency of ACTR is significantly enhanced, while the heat transfer efficiency of ACTL is poor. Furthermore, the thermal-hydraulic performance (THP) of ACTR is enhanced as H increases or R decreases. The research provides a reference for the parameters optimization of ACT.
Figures
-
Akbarzadeh, S. and Valipour, M.S., Energy and Exergy Analysis of a Parabolic Trough Collector Using Helically Corrugated Absorber Tube, Renewable Energy, vol. 155, pp. 735-747,2020.
-
Andreozzi, A., Manca, O., Nardini, S., and Ricci, D., Forced Convection Enhancement in Channels with Transversal Ribs and Nanofluids, Appl. Therm. Eng., vol. 98, pp. 1044-1053,2016.
-
Bhattacharyya, S., Das, S.G., and Chattopadhyay, H., Thermohydraulic Characteristics and Entropy Analysis of a Novel Clockwise and Anti-Clockwise Twisted Sinusoidal Wavy Micro-Channel under Pulsating Inlet Condition, Eur. Phys. J. Appl. Phys, vol. 92, p. 20903, 2020.
-
Cao, Y., Nguyen, P.T., Jermsittiparsert, K., Belmabrouk, H., Alharbi, S.O., and Knorasani, M.S., Thermal Characteristics of Air-Water Two-Phase Flow in a Vertical Annularly Corrugated Tube, J. Energy Storage, vol. 31, p. 101605, 2020.
-
Chen, H.J., Moria, H., Ahmed, S.Y., Nisar, K.S., Mohamed, A.M., Heidarshenas, B., Arsalanloo, A., and Youshanlouei, M.M., Thermal/Exergy and Economic Efficiency Analysis of Circumferentially Corrugated Helical Tube with Constant Wall Temperature, Case Stud. Therm. Eng., vol. 23, p. 100803,2021.
-
Chen, X., Han, H.Z., Lee, K.S., Li, B.X., and Zhang, Y.N., Turbulent Heat Transfer Enhancement in a Heat Exchanger Using Asymmetrical Outward Convex Corrugated Tubes, Nucl. Eng. Des., vol. 350, pp. 78-89,2019.
-
Dittus, L.M.K.B.F.W., Heat Transfer in Automobile Radiators of the Tubular Type, Int. Commun. Heat Mass Transf., vol. 12, pp. 3-22,1985.
-
Han, H.Z., Li, B.X., and Shao, W., Effect of Flow Direction for Flow and Heat Transfer Characteristics in Outward Convex Asymmetrical Corrugated Tubes, Int. J. Heat Mass Transf., vol. 92, pp. 1236-1251,2016.
-
Hong, Y.X., Du, J., Wang, S.F., and Huang, S.M., Heat Transfer and Flow Behaviors of a Wavy Corrugated Tube, Appl. Therm. Eng., vol. 126, pp. 151-166,2017.
-
Kaood, A. and Hassan, M.A., Thermo-Hydraulic Performance of Nanofluids Flow in Various Internally Corrugated Tubes, Chem. Eng. Process., vol. 154, p. 108043,2020.
-
Kaood, A., Abou-Deif, T., Eltahan, H., Yehia, M.A., and Khalil, E.E., Numerical Investigation of Heat Transfer and Friction Characteristics for Turbulent Flow in Various Corrugated Tubes, Proc. Inst. Mech. Eng., Part C.: J. Mech. Eng. Sci., vol. 233, pp. 457-475,2019.
-
Kongkaitpaiboon, V., Promthaisong, P., Chuwattanakul, V., Wongcharee, K., and Eiamasaard, S., Effects of Spiral Start Number and Depth Ratio of Corrugated Tube on Flow and Heat Transfer Characteristics in Turbulent Flow Region, J. Mech. Sci. Technol, vol. 33, pp. 4005-4012,2019.
-
Langeroudi, H.G. and Javaherdeh, K., Investigation Friction Factor and Heat Transfer Characteristics of Turbulent Flow inside the Corrugated Tube Inserted with Typical and V-Cut Twisted Tapes, Heat Mass Transf., vol. 54, pp. 1999-2008,2018.
-
Liao, W.L., Luo, Y.Q., and Chen, T.B., Thermal-Hydraulic Performance Analysis of Outward Convex Corrugated Tubes Based on Skewness and Kurtosis, Int. J. Therm. Sci., vol. 165, p. 106970,2021.
-
Li, X.W., Meng, J.A., and Li, Z.X., Roughness Enhanced Mechanism for Turbulent Convective Heat Transfer, Int. J. Heat Mass Transf., vol. 54, pp. 1775-1781,2011.
-
Li, X.Y., Li, Z.H., and Tao, W.Q., Experimental Study on Heat Transfer and Pressure Drop Characteristics of Fin-and-Tube Surface with Four Convex-Strips around Each Tube, Int. J. Heat Mass Transf., vol. 116, pp. 1085-1095,2021.
-
Mohammed, H.A., Abbad, A.K., and Sheriff, J.M., Influence of Geometrical Parameters and Forced Convective Heat Transfer in Transversely Corrugated Circular Tubes, Int. Commun. Heat Mass, vol. 44, pp. 116-126,2013.
-
Nandi, T.K. and Chattopadhyay, H., Numerical Investigations of Simultaneously Developing Flow in Wavy Microchannels under Pulsating Inlet Flow Condition, Int. Commun. Heat Mass Transf., vol. 47, pp. 27-31,2013.
-
Petukhov, B., Heat Transfer and Friction in Turbulent Pipe Flow with Variable Physical Properties, Adv. Heat Transf., vol. 6, pp. 503-564,1970.
-
Qian, J.Y., Yang, C., Chen, M.R., and Jin, Z.J., Thermohydraulic Performance Evaluation of Multi-Start Spirally Corrugated Tubes, Int. J Heat Mass Transf, vol. 156, p. 119876,2020.
-
Sakhaei, S.A. and Valipour, M.S., Thermal Performance Analysis of a Flat Plate Solar Collector by Utilizing Helically Corrugated Risers: An Experimental Study, Sol. Energy, vol. 207, pp. 235-246,2020.
-
Sun, M. and Zeng, M., Investigation on Turbulent Flow and Heat Transfer Characteristics and Technical Economy of Corrugated, Appl. Therm. Eng., vol. 129, pp. 1-11,2018.
-
Vocale, P., Bozzoli, F., Mocerino, A., and Rainieri, S., Direct Numerical Simulation Applied to the Analysis of the Convective Heat Transfer Enhancement in an Arc-Shaped Wall Corrugated Tube, Comput. Therm. Sci., vol. 11, pp. 315-325,2019.
-
Xie, G., Liu, J., Zhang, W., Lorenzini, G., and Biserni, C., Numerical Prediction of Flow Structure and Heat Transfer in Square Channels with Dimples Combined with Secondary Half-Size Dimples/Protrusions, Numer. Heat Transfer, Part A, vol. 65, pp. 327-356,2014.
-
Xie, S., Liang, Z., Zhang, L., and Wang, Y.L., A Numerical Study on Heat Transfer Enhancement and Flow Structure in Enhanced Tube with Cross Ellipsoidal Dimples, Int. J. Heat Mass Transf., vol. 125, pp. 434-444,2018.
-
Xie, Y., Qu, H., and Zhang, D., Numerical Investigation of Flow and Heat Transfer in Rectangular Channel with Teardrop Dimple/Protrusion, Int. J. Heat Mass Transf., vol. 84, pp. 486-496,2015.
-
Yang, C., Liu, G., Zhang, J.H., and Qian, J.Y., Thermohydraulic Analysis of Hybrid Smooth and Spirally Corrugated Tubes, Int. J. Therm. Sci., vol. 158, p. 106520,2020.
-
Yang, L.B., Han, H.Z., Li, Y. J., and Li, X.M., A Numerical Study of the Flow and Heat Transfer Characteristics of Outward Convex Corrugated Cubes with Twisted-Tape Insert, ASME J. Heat Transf., vol. 138, pp. 7782-7802,2016.
-
Wang, W., Zhang, Y.N., Li, Y.J., Han, H.Z., and Li, B.X., Multi-Objective Optimization of Turbulent Heat Transfer Flow in Novel Outward Helically Corrugated Tubes, Appl. Therm. Eng., vol. 138, pp. 795-806,2018.
-
Wang, W., Zhang, Y.N., Lee, K.S., and Li, B.X., Optimal Design of a Double Pipe Heat Exchanger Based on the Outward Helically Corrugated Tube, Int. J. Heat Mass Transf., vol. 135, pp. 706-716,2019.