每年出版 12 期
ISSN 打印: 1044-5110
ISSN 在线: 1936-2684
Indexed in
EFFECTS OF CAVITATION AND INTERNAL FLOW ON ATOMIZATION OF A LIQUID JET
摘要
The purpose of this investigation is to clarify atomization mechanism of a high-speed liquid jet issuing from a single-hole nozzle. In previous research, it was believed that atomization of the liquid jet was caused by the interfacial forces existing between the issuing jet and the surrounding gas. However, it has been determined that the strong turbulence in the nozzle hole due to cavitation phenomena contributes greatly to the disintegration of the liquid jet. In order to reveal the mutual relationships, experiments were performed under conditions ranging from decompression to high ambient pressures by using acrylic nozzles with various length-to-hole diameter ratios L/D and different inlet shapes of the nozzle hole, close to the hole diameter of an actual nozzle. As a consequence of this study, it has been determined that the primary factor in atomization of the liquid jet is the disturbance of the liquid flow resulting from cavitation phenomena.
-
Chehroudi Bruce, Physical Hypothesis for the Combustion Instability in Cryogenic Liquid Rocket Engines, Journal of Propulsion and Power, 26, 6, 2010. Crossref
-
Bunnell R. A. , Heister S. D. , Three-Dimensional Unsteady Simulation of Cavitating Flows in Injector Passages , Journal of Fluids Engineering, 122, 4, 2000. Crossref
-
Yeh Chun-Lang, Turbulent flow investigation inside and outside plain-orifice atomizers with rounded orifice inlets, Heat and Mass Transfer, 41, 9, 2005. Crossref
-
Park Hongbok, Yoon Sam S., Heister Stephen D., A nonlinear atomization model for computation of drop size distributions and spray simulations, International Journal for Numerical Methods in Fluids, 48, 11, 2005. Crossref
-
DABIRI SADEGH, SIRIGNANO WILLIAM A., JOSEPH DANIEL D., Two-dimensional and axisymmetric viscous flow in apertures, Journal of Fluid Mechanics, 605, 2008. Crossref
-
Dabiri S., Sirignano W. A., Joseph D. D., Cavitation in an orifice flow, Physics of Fluids, 19, 7, 2007. Crossref
-
Anantharamaiah N, Tafreshi H Vahedi, Pourdeyhimi B, A simple expression for predicting the inlet roundness of micro-nozzles, Journal of Micromechanics and Microengineering, 17, 5, 2007. Crossref
-
Dumouchel Christophe, On the experimental investigation on primary atomization of liquid streams, Experiments in Fluids, 45, 3, 2008. Crossref
-
Kim Jin Seok, Kim Jeong Soo, A characterization of the spray evolution by dual-mode phase doppler anemometry in an injector of liquid-propellant thruster, Journal of Mechanical Science and Technology, 23, 6, 2009. Crossref
-
Aleiferis P.G., Hardalupas Y., Kolokotronis D., Taylor A.M.K.P., Kimura T., Investigation of the Internal Flow Field of a Diesel Model Injector Using Particle Image Velocimetry and CFD, SAE Technical Paper Series, 1, 2007. Crossref
-
Tharakan T. John, Rafeeque T.A., The role of backpressure on discharge coefficient of sharp edged injection orifices, Aerospace Science and Technology, 49, 2016. Crossref
-
Roth H., Giannadakis E., Gavaises M., Arcoumanis C., Omae K., Sakata I., Nakamura M., Yanagihara H., Effect of Multi-Injection Strategy on Cavitation Development in Diesel Injector Nozzle Holes, SAE Technical Paper Series, 1, 2005. Crossref
-
Wang Yue, Lee Won Geun, Reitz Rolf D., Diwakar Ramachandra, Numerical Simulation of Diesel Sprays Using an Eulerian-Lagrangian Spray and Atomization (ELSA) Model Coupled with Nozzle Flow, SAE Technical Paper Series, 1, 2011. Crossref
-
Blokkeel G., Barbeau B., Borghi R., A 3D Eulerian Model to Improve the Primary Breakup of Atomizing Jet, SAE Technical Paper Series, 1, 2003. Crossref
-
Im Kyoung-Su, Cheong Seong-Kyun, Powell Christopher F., Lai Ming-chia D., Wang Jin, Unraveling the Geometry Dependence of In-Nozzle Cavitation in High-Pressure Injectors, Scientific Reports, 3, 1, 2013. Crossref
-
Larmi Martti, Rantanen Pekka, Tiainen Jukka, Kiijärvi Jukka, Tanner Franz X., Stalsberg-Zarling Krista, Simulation of Non-Evaporating Diesel Sprays and Verification with Experimental Data, SAE Technical Paper Series, 1, 2002. Crossref
-
Bahn Chi Bum, Majumdar Saurin, Harris Charles, Time-dependent leak behavior of flawed Alloy 600 tube specimens at constant pressure, International Journal of Pressure Vessels and Piping, 88, 10, 2011. Crossref
-
Yeh Chun-Lang, Numerical Study of Inlet and Geometry Effects on Discharge Coefficients for Liquid Jet Emanating From a Plain-Orifice Atomizer, Journal of Mechanics, 18, 3, 2002. Crossref
-
Tonini S., Gavaises M., Theodorakakos A., The role of droplet fragmentation in high-pressure evaporating diesel sprays, International Journal of Thermal Sciences, 48, 3, 2009. Crossref
-
Gemci T., Yakut K., Chigier N., Ho T.C., Experimental study of flash atomization of binary hydrocarbon liquids, International Journal of Multiphase Flow, 30, 4, 2004. Crossref
-
Jung Hun, Kim Jong-Hyun, Kim Jeong-Soo, Spray Characteristics of Nonimpinging-type Injector According to the Injection Pressure Variation and Angular Direction of Orifices, Journal of the Korean Society of Propulsion Engineers, 16, 3, 2012. Crossref
-
Ku K.W., Hong J.G., Effect of Flow Structure Inside Nozzle on the Liquid Jet Breakup of Elliptical Nozzle, Journal of ILASS-Korea, 18, 1, 2013. Crossref
-
Tanner Franz X., A Cascade Atomization and Drop Breakup Model for the Simulation of High-Pressure Liquid Jets, SAE Technical Paper Series, 1, 2003. Crossref
-
Spathopoulou M., Papoulias D., Giannadakis E., Gavaises M., Theodorakakos A., Influence of the Spatially Resolved Nozzle Hole Exit Flow Distribution on Diesel Spray Development, SAE Technical Paper Series, 1, 2007. Crossref
-
Tseng Kuo-Tung, Collicott Steven H., Demonstration of a Fluidic Spray Control Orifice, Journal of Propulsion and Power, 27, 3, 2011. Crossref
-
Marcer R., Le Cottier P., Chaves H., Argueyrolles B., Habchi C., Barbeau B., A Validated Numerical Simulation of Diesel Injector Flow Using a VOF Method, SAE Technical Paper Series, 1, 2000. Crossref
-
Song Jinkwan, Ahn Kyubok, Kim Min-Ki, Yoon Youngbin, Effects of Orifice Internal Flow on Liquid Jets in Subsonic Crossflows, Journal of Propulsion and Power, 27, 3, 2011. Crossref
-
Qin Jian-Rong, Dan Tomohisa, Lai Ming-Chia, Savonen Craig, Schwartz Ernest, Brkyzik Walter, Correlating the Diesel Spray Behavior to Nozzle Design, SAE Technical Paper Series, 1, 1999. Crossref
-
Collicott Steven H., Li Haiyun, True-scale True-pressure Internal Flow Visualization for Diesel Injectors, SAE Technical Paper Series, 1, 2006. Crossref
-
Ramamurthi K., Nandakumar K., Characteristics of flow through small sharp-edged cylindrical orifices, Flow Measurement and Instrumentation, 10, 3, 1999. Crossref
-
Falcucci Giacomo, ubertini Stefano, Bella Gino, Palpacelli Silvia, De Maio Alessandro, Lattice Boltzmann Simulation of a Cavitating Diesel Injector Nozzle, SAE Technical Paper Series, 1, 2011. Crossref
-
Park Hongbok, Heister Stephen D., A numerical study of primary instability on viscous high-speed jets, Computers & Fluids, 35, 10, 2006. Crossref
-
Lee Hyung Ju, Jin You-In, Choi Hojin, Hwang Ki-Young, Effect of Orifice Shape on Cavitation-Induced Injection Characteristics of High-Temperature Aviation Fuel, 51st AIAA/SAE/ASEE Joint Propulsion Conference, 2015. Crossref
-
De Giorgi M. G., Ficarella A., Tarantino M., A Data Acquisition System to Detect Bubble Collapse Time and Pressure Losses in Water Cavitation, in Advanced Instrument Engineering, 2013. Crossref
-
Giannadakis E., Papoulias D., Gavaises M., Arcoumanis C., Soteriou C., Tang W., Evaluation of the Predictive Capability of Diesel Nozzle Cavitation Models, SAE Technical Paper Series, 1, 2007. Crossref
-
Arcoumanis C., Flora H., Gavaises M., Badami M., Cavitation in Real-Size Multi-Hole Diesel Injector Nozzles, SAE Technical Paper Series, 1, 2000. Crossref
-
Papoutsakis A., Theodorakakos A., Giannadakis E., Papoulias D., Gavaises M., LES Predictions of the Vortical Flow Structures in Diesel Injector Nozzles, SAE Technical Paper Series, 1, 2009. Crossref
-
TAMAKI Nobushige, NISHIKAWA Kazuma, Design of high-dispersion atomization nozzle for direct injection Diesel engine (Effects of shapes and measurement of nozzle holes of injection nozzle on spray and flow characteristics), Transactions of the JSME (in Japanese), 81, 825, 2015. Crossref
-
Tseng Kuo-Tung, Collicott Steven H., Experimental and numerical investigations of mechanisms in fluidic spray control, International Journal of Multiphase Flow, 61, 2014. Crossref
-
Goney Kayhan H., Corradini Michael L., Isolated Effects of Ambient Pressure, Nozzle Cavitation and Hole Inlet Geometry on Diesel Injection Spray Characteristics, SAE Technical Paper Series, 1, 2000. Crossref
-
Qin Jian-Rong, Yu S. T. John, Zhang Zeng-Chan, Lai Ming-Chia, Transient Cavitating Flow Simulations Inside a 2-D VCO Nozzle Using the Space-Time CE/SE Method, SAE Technical Paper Series, 1, 2001. Crossref
-
Arcoumanis C., Flora H., Gavaises M., Kampanis N., Horrocks R., Investigation of Cavitation in a Vertical Multi-Hole Injector, SAE Technical Paper Series, 1, 1999. Crossref
-
Örley F., Trummler T., Hickel S., Mihatsch M. S., Schmidt S. J., Adams N. A., Large-eddy simulation of cavitating nozzle flow and primary jet break-up, Physics of Fluids, 27, 8, 2015. Crossref
-
Yu Yusong, Li Guoxiu, Wang Yong, Ding Jiawei, Modeling the atomization of high-pressure fuel spray by using a new breakup model, Applied Mathematical Modelling, 40, 1, 2016. Crossref
-
Ramasubramanian Chandrasekar, Notaro Vincent, Lee Jong Guen, Characterization of Near-Field Spray of Nongelled- and Gelled-Impinging Doublets at High Pressure, Journal of Propulsion and Power, 31, 6, 2015. Crossref
-
Song Jinkwan, Ahn Kyubok, Kim Min-Ki, Yoon Youngbin, Effects of Orifice Internal Flow on Liquid Jets in Subsonic Crossflows, Journal of Propulsion and Power, 27, 3, 2011. Crossref
-
Dumouchel Christophe, Leboucher Nicolas, Lisiecki Denis, Cavitation and primary atomization in real injectors at low injection pressure condition, Experiments in Fluids, 54, 6, 2013. Crossref
-
Margot X., Payri R., Gil A., Chavez M., Pinzello A., Combined CFD-Phenomenological Approach to the Analysis of Diesel Sprays under Non-Evaporative Conditions, SAE Technical Paper Series, 1, 2008. Crossref
-
De Giorgi M.G., Ficarella A., Tarantino M., Evaluating cavitation regimes in an internal orifice at different temperatures using frequency analysis and visualization, International Journal of Heat and Fluid Flow, 39, 2013. Crossref
-
Kähler G., Bonelli F., Gonnella G., Lamura A., Cavitation inception of a van der Waals fluid at a sack-wall obstacle, Physics of Fluids, 27, 12, 2015. Crossref
-
Jung Kihoon, Lim Byoungjik, Khil Taeock, Yoon Youngbin, Breakup Characteristics of Laminar and Turbulent Liquid Sheets Formed by Impinging Jets in High Pressure Environments, 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, 2004. Crossref
-
Jung Kihoon, Khil Taeock, Yoon Youngbin, Effects of Orifice Internal Flow on Breakup Characteristics of like-Doublet Injectors, Journal of Propulsion and Power, 22, 3, 2006. Crossref
-
Liu Z. C., Yu K. B., Tian J., Han Y. Q., Qi S. L., Teng P. K., Influence of rail pressure on a two-stage turbocharged heavy-duty diesel engine under transient operation, International Journal of Automotive Technology, 18, 1, 2017. Crossref
-
Dabiri Sadegh, Sirignano William, Joseph Daniel, Cavitation in an Orifice Flow, 45th AIAA Aerospace Sciences Meeting and Exhibit, 2007. Crossref
-
Bae Seong Hun, Kwon Oh Chae, Kim Jeong Soo, Spray Characteristics of Swirl-coaxial Injector According to the Recess Length and Injection Pressure Variation, Journal of the Korean Society of Propulsion Engineers, 20, 4, 2016. Crossref
-
Žekonis Gediminas, Žekonis Jonas, Gleiznys Alvydas, Noreikienė Viktorija, Balnytė Ingrida, Šadzevičienė Renata, Narbutaitė Julija, Effect of Supragingival Irrigation with Aerosolized 0.5% Hydrogen Peroxide on Clinical Periodontal Parameters, Markers of Systemic Inflammation, and Morphology of Gingival Tissues in Patients with Periodontitis, Medical Science Monitor, 22, 2016. Crossref
-
Falcucci Giacomo, Ubertini Stefano, Bella Gino, Succi Sauro, Lattice Boltzmann Simulation of Cavitating Flows, Communications in Computational Physics, 13, 3, 2013. Crossref
-
Tseng Kuotung, Collicott Steven, Internal Flows in Fluidic Spray Control, 36th AIAA Fluid Dynamics Conference and Exhibit, 2006. Crossref
-
Yin B., Yu S., Jia H., Yu J., Numerical research of diesel spray and atomization coupled cavitation by Large Eddy Simulation (LES) under high injection pressure, International Journal of Heat and Fluid Flow, 59, 2016. Crossref
-
Gopala Yogish, Zhang Peng, Bibik Oleksandr, Lubarsky Eugene, Zinn Ben, Liquid Fuel Jet in Crossflow -Trajectory Correlations based on the Column Breakup Point, 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, 2010. Crossref
-
Westlye Fredrik R., Battistoni Michele, Skeen Scott A., Manin Julien, Pickett Lyle M., Ivarsson Anders, Penetration and combustion characterization of cavitating and non-cavitating fuel injectors under diesel engine conditions, SAE Technical Paper Series, 1, 2016. Crossref
-
Ahn Kyubok, Kim Junghoon, Yoon Youngbin, Effect of Cavitation on Transverse Injection into Subsonic Crossflows, 39th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, 2003. Crossref
-
Lee Hyung Ju, Jin Yu-In, Choi Hojin, Hwang Ki-Young, Hydraulic characterization of high temperature hydrocarbon liquid jets, International Journal of Heat and Fluid Flow, 65, 2017. Crossref
-
Giannadakis E, Papoulias D, Theodorakakos A, Gavaises M, Simulation of cavitation in outward-opening piezo-type pintle injector nozzles, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 222, 10, 2008. Crossref
-
Song Yoonho, Hwang Donghyun, Ahn Kyubok, Effect of orifice geometry on spray characteristics of liquid jet in cross flow, 55th AIAA Aerospace Sciences Meeting, 2017. Crossref
-
Lee Hyung Ju, Choi Hojin, Hwang Ki-Young, Park Dong-Chang, Min Seongki, Numerical study of choked cavitation in high temperature hydrocarbon liquid jets, International Journal of Heat and Fluid Flow, 68, 2017. Crossref
-
Duke Daniel J, Schmidt David P, Neroorkar Kshitij, Kastengren Alan L, Powell Christopher F, High-resolution large eddy simulations of cavitating gasoline–ethanol blends, International Journal of Engine Research, 14, 6, 2013. Crossref
-
Broumand Mohsen, Birouk Madjid, Effect of nozzle-exit conditions on the near-field characteristics of a transverse liquid jet in a subsonic uniform cross airflow, Physics of Fluids, 29, 11, 2017. Crossref
-
Tafreshi H. Vahedi, Pourdeyhimi B., Simulating the Flow Dynamics in Hydroentangling Nozzles: Effect of Cone Angle and Nozzle Aspect Ratio, Textile Research Journal, 73, 8, 2003. Crossref
-
Vahedi Tafreshi H., Pourdeyhimi B., Simulating Cavitation and Hydraulic Flip Inside Hydroentangling Nozzles, Textile Research Journal, 74, 4, 2004. Crossref
-
Gavaises M, Flow in valve covered orifice nozzles with cylindrical and tapered holes and link to cavitation erosion and engine exhaust emissions, International Journal of Engine Research, 9, 6, 2008. Crossref
-
Ramamurthi K, Nandakumar K, Shankar S, Patnaik R, Hysteresis and bifurcation of flow in fuel injection nozzles, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 215, 1, 2001. Crossref
-
Song Yoonho, Hwang Donghyun, Ahn Kyubok, Effect of Orifice Geometry on Flow Characteristics of Liquid Jet from Single Hole Nozzle, Journal of the Korean Society of Propulsion Engineers, 21, 5, 2017. Crossref
-
Cui Jiwen, Lai Houhu, Feng Kunpeng, Ma Yarui, Quantitative analysis of the minor deviations in nozzle internal geometry effect on the cavitating flow, Experimental Thermal and Fluid Science, 94, 2018. Crossref
-
Lee Hyung Ju, Choi Hojin, Park Dong-Chang, Hydraulic characteristics of high temperature hydrocarbon liquid jets with various orifice geometries, Acta Astronautica, 152, 2018. Crossref
-
De Giorgi M.G., Fontanarosa D., Ficarella A., Characterization of cavitating flow regimes in an internal sharp-edged orifice by means of Proper Orthogonal Decomposition, Experimental Thermal and Fluid Science, 93, 2018. Crossref
-
Wang Ziman, Dai Xiaoyu, Liu Fushui, Li Zhishuang, Wu Han, Breakup of fuel sprays under cavitating and flash boiling conditions, Applied Thermal Engineering, 143, 2018. Crossref
-
Liu Fushui, Li Zhishuang, Wang Ziman, Dai Xiaoyu, He Xu, Lee Chia-Fon, Microscopic study on diesel spray under cavitating conditions by injecting fuel into water, Applied Energy, 230, 2018. Crossref
-
Eckert Peter, Rakowski Sebastian, Dieselverbrennung, in Grundlagen Verbrennungsmotoren, 2018. Crossref
-
Lee Hyung Ju, Choi Hojin, Jin Yu-In, Hwang Ki-Young, Park Dong-Chang, Min Seongki, Effect of nozzle inlet geometry in high temperature hydrocarbon liquid jets, International Journal of Heat and Fluid Flow, 74, 2018. Crossref
-
Abderrezzak Belkacem, Huang Yong, Investigation of the Effect of Cavitation in Nozzles With Different Length to Diameter Ratios on Atomization of a Liquid Jet, Journal of Thermal Science and Engineering Applications, 9, 3, 2017. Crossref
-
Feng Jia Ping, Choi Sang In, Seo Ho Seok, Jo Young Min, Improvement of liquid fuel atomization for an internal engine using an auxiliary device, Korean Journal of Chemical Engineering, 35, 10, 2018. Crossref
-
SEKINE Akihiro, KOSHIZUKA Seiichi, YOSHIMURA Kazuki, ISHII Eiji, Numerical Simulation of Cavitation in a Nozzle and Liquid Jet Using Moving Particle Semi-implicit Method, JAPANESE JOURNAL OF MULTIPHASE FLOW, 31, 4, 2017. Crossref
-
Morad M. R., Khosrobeygi H., Penetration of Elliptical Liquid Jets in Low-Speed Crossflow, Journal of Fluids Engineering, 141, 1, 2019. Crossref
-
Jung Kihoon, Khil Taeock, Yoon Youngbin, Roh Tae-Seong, The Breakup Characteristics of Liquid Sheet Formed by Like-Doublet Injectors, 38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2002. Crossref
-
Abers Paul M., Cenker Emre, Yasutomi Koji, Hwang Joonsik, Pickett Lyle M., Effect of pressure cycling on gas exchange in a transparent fuel injector, SAE Technical Paper Series, 1, 2019. Crossref
-
Shemirani Farzin M., Church Tanya K., Lewis David A., Finlay Warren H., Vehring Reinhard, Onset of Flash Atomization in a Propellant Microjet, Journal of Fluids Engineering, 137, 9, 2015. Crossref
-
Song Jinkwan, Ahn Kyubok, Kim Min-ki, Yoon Youngbin, Spray Plume Characteristics of Liquid Jets in Subsonic Crossflows, 43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2007. Crossref
-
Yang Shangze, Ma Zhen, Li Xuesong, Hung David L.S., Xu Min, A review on the experimental non-intrusive investigation of fuel injector phase changing flow, Fuel, 259, 2020. Crossref
-
Kiaoulias D.N., Travis T.A., Moore J.D., Risha G.A., Evaluation of orifice inlet geometries on single liquid injectors through cold-flow experiments, Experimental Thermal and Fluid Science, 103, 2019. Crossref
-
Befrui B., Corbinelli G., Hoffmann G., Andrews R. J., Sankhalpara S. R., Cavitation and Hydraulic Flip in the Outward-Opening GDi Injector Valve-Group, SAE Technical Paper Series, 1, 2009. Crossref
-
Eckert Peter, Rakowski Sebastian, Dieselverbrennung, in Grundlagen Verbrennungsmotoren, 2019. Crossref
-
Bruneaux Gilles, Verhoeven Dean, Baritaud Thierry, High Pressure Diesel Spray and Combustion Visualization in a Transparent Model Diesel Engine, SAE Technical Paper Series, 1, 1999. Crossref
-
Blokkeel G., Demoulin F. X., Borghi R., Modeling of Two-Phase Flows: An Eulerian Model for Diesel Injection, in Thermo- and Fluid Dynamic Processes in Diesel Engines 2, 2004. Crossref
-
Vargas Niño Emerson, Razavi Mohammad Reza H., Design of Two-Phase Injectors Using Analytical and Numerical Methods with Application to Hybrid Rockets, AIAA Propulsion and Energy 2019 Forum, 2019. Crossref
-
Zhang Fangyuan, Wang Zhongshu, Tian Jing, Li Linlin, Yu Kaibo, He Kunyi, Effect of EGR and Fuel Injection Strategies on the Heavy-Duty Diesel Engine Emission Performance under Transient Operation, Energies, 13, 3, 2020. Crossref
-
Lagumbay Randy S., Vasilyev Oleg V., Haselbacher Andreas, Wang Jin, Numerical Simulation of a Supersonic Three-Phase Cavitating Jet Flow Through a Gaseous Medium in Injection Nozzle, Energy Conversion and Resources, 2005. Crossref
-
Manin J., Pickett L.M., Yasutomi K., Stereoscopic high-speed microscopy to understand transient internal flow processes in high-pressure nozzles, Experimental Thermal and Fluid Science, 114, 2020. Crossref
-
Žekonis Gediminas, Šadzevičienė Renata, Balnytė Ingrida, Noreikienė Viktorija, Šidlauskaitė Gaida Marija, Šadzevičiūtė Eglė, Žekonis Jonas, Clinical and Microbiological Effects of Weekly Supragingival Irrigation with Aerosolized 0.5% Hydrogen Peroxide and Formation of Cavitation Bubbles in Gingival Tissues after This Irrigation: A Six-Month Randomized Clinical Trial, Oxidative Medicine and Cellular Longevity, 2020, 2020. Crossref
-
ÖZKAZANÇ Gökçe, ÜNLÜSOY Levent, ERDEM Emine Yegan, Validation and Verification of Cavitation in Microchannels by using an Open Source Computational Tool, Celal Bayar Üniversitesi Fen Bilimleri Dergisi, 2021. Crossref
-
Wang Jianquan, He Zhixia, Duan Lian, Zhou Han, Zhong Wenjun, Guo Genmiao, Effect of diesel/gasoline/HCB blends and temperature on string cavitating flow in common-rail injector nozzle, Fuel, 304, 2021. Crossref
-
Atomization and Spray Formation, in Collision Phenomena in Liquids and Solids, 2017. Crossref
-
De Giorgi M. G., Ficarella A., Tarantino M., A Data Acquisition System to Detect Bubble Collapse Time and Pressure Losses in Water Cavitation, International Journal of Measurement Technologies and Instrumentation Engineering, 1, 1, 2011. Crossref
-
Esposito C., Mendez M.A., Steelant J., Vetrano M.R., Spectral and modal analysis of a cavitating flow through an orifice, Experimental Thermal and Fluid Science, 121, 2021. Crossref