Abo Bibliothek: Guest

INFLUENCE OF LENGTH SCALE PARAMETER ON NONLINEAR BENDING OF FUNCTIONALLY GRADED SATURATED POROUS RECTANGULAR MICROPLATES

Volumen 13, Ausgabe 2, 2022, pp. 1-40
DOI: 10.1615/SpecialTopicsRevPorousMedia.2022040711
Get accessGet access

ABSTRAKT

Using a variational method, the nonlinear governing equations of the equilibrium of functionally graded (FG) saturated porous microplates have been derived on the basis of von Kármán hypotheses, first-order shear deformation plate, and modified couple stress theories. The microplate pore distribution is considered functionally graded across thickness. The nonlinear boundary conditions and the coupled nonlinear partial differential equations are discretized via generalized differential quadrature method and assembled throughout the domain grid points, in a manner that can be regenerated for any number of the microplate length and width grid points by means of a computer, in order to guarantee the numerical stability. The assembled nonlinear equations, as well as corresponding linear equations, have been numerically solved via a Newton-Raphson iteration method for bending analysis of the microplate. The results are given a structure to appropriately show how the bending deflection of the microplate changes under the influences of both length scale parameter and either porosity, pore distributions, the Skempton coefficient, geometric parameters, or type of boundary conditions. A few coincidences of the result with the relevant literature, especially a mathematically-analogous FG microplate, have been verified as necessary conditions for the validity of the result.

REFERENZEN
  1. Ahmad, H. and Khan, T.A., Variational Iteration Algorithm-I with an Auxiliary Parameter for Wave-Like Vibration Equations, J. Low Freq. Noise Vib. Act. Control, vol. 38, nos. 3-4, pp. 1113-1124,2019.

  2. Ahmad, H., Khan, T.A., and Cesarano, C., Numerical Solutions of Coupled Burgers' Equations: Axioms, vol. 8, no. 4, p. 119, 2019.

  3. Ahmad, H., Akgiil, A., Khan, T.A., Stanimirovic, P.S., and Chu, Y.M., New Perspective on the Conventional Solutions of the Nonlinear Time-Fractional Partial Differential Equations (M.M.A. Khater, Ed.), Complexity, vol. 2020, pp. 1-10, 2020a.

  4. Ahmad, H., Khan, T.A., Ahmad, I., Stanimirovic, P.S., and Chu, Y.-M., A New Analyzing Technique for Nonlinear Time Fractional Cauchy Reaction-Diffusion Model Equations, Results Phys., vol. 19, p. 103462, 2020b.

  5. Ahmad, H., Khan, T.A., Stanimirovic, P.S., Chu, Y.-M., and Ahmad, I., Modified Variational Iteration Algorithm-II: Convergence and Applications to Diffusion Models, (M.M.A. Khater, Ed.), Complexity, vol. 2020, pp. 1-14, 2020c.

  6. Ahmad, H., Seadawy, A.R., and Khan, T.A., Study on Numerical Solution of Dispersive Water Wave Phenomena by Using a Reliable Modification of Variational Iteration Algorithm, Math. Comput. Simul., vol. 177, pp. 13-23, 2020d.

  7. Akbarzadeh Khorshidi, M., Shariati, M., and Emam, S.A., Postbuckling of Functionally Graded Nanobeams Based on Modified Couple Stress Theory under General Beam Theory, Int. J. Mech. Sci., vol. 110, pp. 160-169, 2016.

  8. Alhaifi, K., Arshid, E., and Khorshidvand, A.R., Large Deflection Analysis of Functionally Graded Saturated Porous Rectangular Plates on Nonlinear Elastic Foundation via GDQM, Steel Compos. Struct., vol. 39, no. 6, pp. 795-809,2021.

  9. Alinaghizadeh, F. and Shariati, M., Nonlinear Analysis of Size-Dependent Annular Sector and Rectangular Microplates under Transverse Loading and Resting on Foundations Based on the Modified Couple Stress Theory, Thin-Walled Struct., vol. 149, p. 106583,2020.

  10. Al Jahwari, F., Anwer, A.A.W., andNaguib, H.E., Fabrication and Microstructural Characterization of Functionally Graded Porous Acrylonitrile Butadiene Styrene and the Effect of Cellular Morphology on Creep Behavior, J. Polym. Sci. Part B Polym. Phys, vol. 53, no. 11, pp. 795-803,2015.

  11. Al Jahwari, F., Huang, Y., Naguib, H.E., and Lo, J., Relation of Impact Strength to the Microstructure of Functionally Graded Porous Structures of Acrylonitrile Butadiene Styrene (ABS) Foamed by Thermally Activated Microspheres, Polymer, vol. 98, pp. 270-281, 2016.

  12. Ansari, R., Gholami, R., and Shahabodini, A., Size-Dependent Geometrically Nonlinear Forced Vibration Analysis of Functionally Graded First-Order Shear Deformable Microplates, J. Mech, vol. 32, no. 5, pp. 539-554, 2016.

  13. Ansari, R., Gholami, R., Faghih Shojaei, M., Mohammadi, V., and Darabi, M.A., Size-Dependent Nonlinear Bending and Post-buckling of Functionally Graded Mindlin Rectangular Microplates Considering the Physical Neutral Plane Position, Compos. Struct., vol. 127, pp. 87-98, 2015.

  14. Ansari, R., Hassani, R., Gholami, R., and Rouhi, H., Buckling and Postbuckling of Plates Made of FG-GPL-Reinforced Porous Nanocomposite with Various Shapes and Boundary Conditions, Int. J. Struct. Stab. Dyn., vol. 21, no. 5, p. 2150063, 2021.

  15. Ansari, R., Hassani, R., Gholami, R., and Rouhi, H., Nonlinear Bending Analysis of Arbitrary-Shaped Porous Nanocomposite Plates Using a Novel Numerical Approach, Int. J. Non. Linear. Mech., vol. 126, p. 103556, 2020.

  16. Bazighifan, O., Ahmad, H., and Yao, S.W., New Oscillation Criteria for Advanced Differential Equations of Fourth Order, Mathematics, vol. 8, no. 5, p. 728, 2020.

  17. Bellman, R. and Casti, J., Differential Quadrature and Long-Term Integration, J. Math. Anal. Appl., vol. 34, no. 2, pp. 235-238, 1971.

  18. Bert, C.W. and Malik, M., Differential Quadrature, Method in Computational Mechanics: A Review, Appl. Mech. Rev., vol. 49, no. 1,pp. 1-28, 1996.

  19. Bert, C.W., Jang, S.K., and Striz, A.G., Nonlinear Bending Analysis of Orthotopic Rectangular Plates by the Method of Differential Quadrature, Comput. Mech, vol. 5, nos. 2-3, pp. 217-226,1989.

  20. Brush, D.O. and Almorth, B.O., Buckling of Bars, Plates and Shells, New York: McGraw-Hill, 1975.

  21. Chong, A.C.M., Yang, F., Lam, D.C.C., and Tong, P., Torsion and Bending of Micron-Scaled Structures, J. Mater. Res., vol. 16, no. 4, pp. 1052-1058,2001.

  22. Civalek, O., Application of Differential Quadrature (DQ) and Harmonic Differential Quadrature (HDQ) for Buckling Analysis of Thin Isotropic Plates and Elastic Columns, Eng. Struct., vol. 26, no. 2, pp. 171-186,2004.

  23. Coskun, S., Kim, J., and Toutanji, H., Bending, Free Vibration, and Buckling Analysis of Functionally Graded Porous Micro-Plates Using a General Third-Order Plate Theory, J. Compos. Sci., vol. 3, no. 1, p. 15,2019.

  24. Cowin, S.C., Bone Poroelasticity, J. Biomech., vol. 32, no. 3, pp. 217-238, 1999.

  25. Detournay, E. and Cheng, A.H.-D., Fundamentals of Poroelasticity, Analysis and Design Methods, Elsevier, pp. 113-171,1993.

  26. Ebrahimi, F., Barati, M.R., and Civalek, O., Application of Chebyshev-Ritz Method for Static Stability and Vibration Analysis of Nonlocal Microstructure-Dependent Nanostructures, Eng. Comput, vol. 36, no. 3, pp. 953-964,2020.

  27. Emdadi, M., Mohammadimehr, M., and Rousta Navi, B., Free Vibration of an Annular Sandwich Plate with CNTRC Facesheets and FG Porous Cores Using Ritz Method, Adv. Nano Res., vol. 7, nos. 2, pp. 109-123, 2019.

  28. Farzam, A. and Hassani, B., Isogeometric Analysis of In-Plane Functionally Graded Porous Microplates Using Modified Couple Stress Theory, Aerosp. Sci. Technol., vol. 91, pp. 508-524, 2019.

  29. Feyzi, M.R. and Khorshidvand, A.R., Axisymmetric Post-Buckling Behavior of Saturated Porous Circular Plates, Thin-Walled Struct., vol. 112, pp. 149-158,2017.

  30. Fleck, N.A., Muller, G.M., Ashby, M.F., and Hutchinson, J.W., Strain Gradient Plasticity: Theory and Experiment, Acta Metall. Mater., vol. 42, no. 2, pp. 475-487,1994.

  31. Ghadiri, M., Mahinzare, M., Shafiei, N., and Ghorbani, K., On Size-Dependent Thermal Buckling and Free Vibration of Circular FG Microplates in Thermal Environments, Microsyst. Technol, vol. 23, no. 10, pp. 4989-5001, 2017.

  32. Ghassemi, A., Stress and Pore Pressure Distribution around a Pressurized, Cooled Crack in Low Permeability Rock, Proc. 32nd Work. Geotherm. Reserv. Eng., Stanford University, California, pp. 22-24, 2007.

  33. Ghassemi, A. and Zhang, Q., A Transient Fictitious Stress Boundary Element Method for Porothermoelastic Media, Eng. Anal. Bound. Elem., vol. 28, no. 11, pp. 1363-1373, 2004.

  34. Gholami, R. and Ansari, R., A Most General Strain Gradient Plate Formulation for Size-Dependent Geometrically Nonlinear Free Vibration Analysis of Functionally Graded Shear Deformable Rectangular Microplates, Nonlinear Dyn, vol. 84, no. 4, pp. 2403-2422, 2016.

  35. Gholami, R., Ansari, R., and Rouhi, H., Nonlinear Pull-In Instability of Strain Gradient Microplates Made of Functionally Graded Materials, Int. J. Struct. Stab. Dyn, vol. 19, no. 2, p. 1950007, 2019.

  36. Giannitelli, S.M., Basoli, F., Mozetic, P., Piva, P., Bartuli, F.N., Luciani, F., Arcuri, C., Trombetta, M., Rainer, A., and Licoccia, S., Graded Porous Polyurethane Foam: A Potential Scaffold for Oro-Maxillary Bone Regeneration, Mater. Sci. Eng. C, vol. 51, pp. 329-335,2015.

  37. Han, C., Li, Y., Wang, Q., Wen, S., Wei, Q., Yan, C., Hao, L., Liu, J., and Shi, Y., Continuous Functionally GradedPorous Titanium Scaffolds Manufactured by Selective Laser Melting for Bone Implants, J. Mech. Behav. Biomed. Mater, vol. 80, pp. 119-127, 2018.

  38. Inc, M., Khan, M.N., Ahmad, I., Yao, S.W., Ahmad, H., and Thounthong, P., Analysing Time-Fractional Exotic Options via Efficient Local Meshless Method, Results Phys, vol. 19, p. 103385, 2020.

  39. Jabbari, M., Farzaneh Joubaneh, E., and Mojahedin, A., Thermal Buckling Analysis of Porous Circular Plate with Piezoelectric Actuators Based on First Order Shear Deformation Theory, Int. J. Mech. Sci., vol. 83, pp. 57-64,2014.

  40. Jabbari, M., Mojahedin, A., and Joubaneh, E.F., Thermal Buckling Analysis of Circular Plates Made of Piezoelectric and Saturated Porous Functionally Graded Material Layers, J. Eng. Mech., vol. 141, no. 4, p. 04014148, 2015.

  41. Jang, S.K., Bert, C.W., and Striz, A.G., Application of Differential Quadrature to Static Analysis of Structural Components, Int. J. Numer. Methods Eng., vol. 28, no. 3, pp. 561-577, 1989.

  42. Kadum Njim, E., Bakhy, S.H., and Al-Waily, M., Optimization Design of Vibration Characterizations for Functionally Graded Porous Metal Sandwich Plate Structure, Mater. Today Proc., 2021.

  43. Karimi, M. and Farajpour, M.R., Bending and Buckling Analyses of BiTiO3-CoFe2O4 Nanoplates Based on Nonlocal Strain Gradient and Modified Couple Stress Hypotheses: Rate of Surface Layers Variations, Appl. Phys. A, vol. 125, no. 8, p. 530, 2019.

  44. Ke, L.-L., Yang, J., Kitipornchai, S., and Bradford, M.A., Bending, Buckling and Vibration of Size-Dependent Functionally Graded Annular Microplates, Compos. Struct., vol. 94, no. 11, pp. 3250-3257, 2012.

  45. Kim, J. and Reddy, J.N., Analytical Solutions for Bending, Vibration, and Buckling of FGM Plates Using a Couple Stress-Based Third-Order Theory, Compos. Struct, vol. 103, pp. 86-98, 2013.

  46. Kim, J., Zur, K.K., and Reddy, J.N., Bending, Free Vibration, and Buckling of Modified Couples Stress-Based Functionally Graded Porous Micro-Plates, Compos. Struct., vol. 209, pp. 879-888,2019.

  47. Koiter, W.T., Couple-Stresses in the Theory of Elasticity, Proc. K. ned. Akad. Wet. B, vol. 67, pp. 17-44,1964.

  48. Koohbor, B. and Kidane, A., Design Optimization of Continuously and Discretely Graded Foam Materials for Efficient Energy Absorption, Mater. Des, vol. 102, pp. 151-161, 2016.

  49. Lam, D.C.C., Yang, F., Chong, A.C.M., Wang, J., and Tong, P., Experiments and Theory in Strain Gradient Elasticity, J. Mech. Phys. Solids, vol. 51, no. 8, pp. 1477-1508,2003.

  50. Lou, J. and He, L., Closed-Form Solutions for Nonlinear Bending and Free Vibration of Functionally Graded Microplates Based on the Modified Couple Stress Theory, Compos. Struct., vol. 131, pp. 810-820, 2015.

  51. Ma, H.M., Gao, X.L., and Reddy, J.N., A Non-Classical Mindlin Plate Model Based on a Modified Couple Stress Theory, Acta Mech., vol. 220, nos. 1-4, pp. 217-235,2011.

  52. Magnucka-Blandzi, E., Dynamic Stability of a Metal Foam Circular Plate, J. Theor. Appl. Mech, vol. 47, no. 2, pp. 421-433,2009.

  53. Magnucki, K. and Stasiewicz, P., Elastic Buckling of a Porous Beam, J. Theor. Appl. Mech., vol. 42, no. 4, pp. 859-868,2004.

  54. Malekzadeh, P., Nonlinear Free Vibration of Tapered Mindlin Plates with Edges Elastically Restrained against Rotation Using DQM, Thin-Walled Struct, vol. 46, no. 1, pp. 11-26, 2008.

  55. Malekzadeh, P. and Farid, M., A DQ Large Deformation Analysis of Composite Plates on Nonlinear Elastic Foundations, Compos. Struct., vol. 79, no. 2, pp. 251-260, 2007.

  56. Malekzadeh, P. and Fiouz, A.R., Large Deformation Analysis of Orthotopic Skew Plates with Nonlinear Rotationally Restrained Edges Using DQM, Compos. Struct, vol. 80, no. 2, pp. 196-206,2007.

  57. Malekzadeh, P. and Setoodeh, A.R., Large Deformation Analysis of Moderately Thick Laminated Plates on Nonlinear Elastic Foundations by DQM, Compos. Struct., vol. 80, no. 4, pp. 569-579, 2007.

  58. Malikan, M., Analytical Predictions for the Buckling of a Nanoplate Subjected to Non-Uniform Compression Based on the Four- variable Plate Theory, J. Appl. Comput. Mech., vol. 3, no. 3, pp. 218-228, 2017.

  59. Malikan, M., Buckling Analysis of a Micro Composite Plate with Nano Coating Based on the Modified Couple Stress Theory, J. Appl. Comput. Mech, vol. 4, no. 1, pp. 1-15,2018.

  60. Merxhani, A., An Introduction to Linear Poroelasticity, arXiv, vol. 1607, p. 04274, 2016.

  61. Mindlin, R.D., Influence of Couple-Stresses on Stress Concentrations, Exp. Mech., vol. 3, no. 1, pp. 1-7, 1963.

  62. Mindlin, R.D., Micro-Structure in Linear Elasticity, Arch. Ration. Mech. Anal, vol. 16, no. 1, pp. 51-78, 1964.

  63. Mindlin, R.D. and Tiersten, H.F., Effects of Couple-Stresses in Linear Elasticity, Arch. Ration. Mech. Anal., vol. 11, no. 1, pp. 415-448, 1962.

  64. Mohammadimehr, M. and Mohandes, M., The Effect of Modified Couple Stress Theory on Buckling and Vibration Analysis of Functionally Graded Double-Layer Boron Nitride Piezoelectric Plate Based on CPT, J. Solid Mech., vol. 7, no. 3, pp. 281-298, 2015.

  65. Mohammadimehr, M., Mohandes, M., and Moradi, M., Size Dependent Effect on the Buckling and Vibration Analysis of Double-Bonded Nanocomposite Piezoelectric Plate Reinforced by Boron Nitride Nanotube Based on Modified Couple Stress Theory, J. Vib. Control, vol. 22, no. 7, pp. 1790-1807, 2016.

  66. Mojahedin, A., Jabbari, M., and Rabczuk, T., Thermoelastic Analysis of Functionally Graded Porous Beam, J. Therm. Stress., vol. 41, no. 8, pp. 937-950,2018.

  67. Nguyen, H.X., Nguyen, T.N., Abdel-Wahab, M., Bordas, S., Nguyen-Xuan, H., and Vo, T.P., A Refined Quasi-3D Isogeometric Analysis for Functionally Graded Microplates Based on the Modified Couple Stress Theory, Comput. Methods Appl. Mech. Eng., vol. 313, pp. 904-940, 2017.

  68. Panah, M., Khorshidvand, A., Khorsandijou, S., and Jabbari, M., Axisymmetric Nonlinear Behavior of Functionally Graded Saturated Poroelastic Circular Plates under Thermo-Mechanical Loading, Proc. Inst. Mech. Eng. Part C, J. Mech. Eng. Sci., p. 095440622110516,2021.

  69. Panah, M., Khorshidvand, A.R., Khorsandijou, S.M., and Jabbari, M., Pore Pressure and Porosity Effects on Bending and Thermal Postbuckling Behavior of FG Saturated Porous Circular Plates, J. Therm. Stress., vol. 42, no. 9, pp. 1083-1109, 2019.

  70. Quan, J.R. and Chang, C.T., New Insights in Solving Distributed System Equations by the Quadrature Method-I. Analysis, Comput. Chem. Eng., vol. 13, no. 7, pp. 779-788, 1989.

  71. Rahaeifard, M., Kahrobaiyan, M.H., and Ahmadian, M.T., Sensitivity Analysis of Atomic Force Microscope Cantilever Made of Functionally Graded Materials, Proc. 3rd Int. Conf. Micro-Nanosystems (MNS3), San Diego, CA, USA, pp. 539-544, August-September, 2009.

  72. Reddy, J.N., Mechanics of Laminated Composite Plates and Shells: Theory and Analysis, 2nd ed., Boca Raton: CRC Press, 2004.

  73. Reddy, J.N., Microstructure-Dependent Couple Stress Theories of Functionally Graded Beams, J. Mech. Phys. Solids, vol. 59, no. 11, pp. 2382-2399,2011.

  74. Reddy, J.N. and Kim, J., A Nonlinear Modified Couple Stress-Based Third-Order Theory of Functionally Graded Plates, Compos. Struct., vol. 94, no. 3, pp. 1128-1143,2012.

  75. Shaat, M., Mahmoud, F.F., Gao, X.-L., and Faheem, A.F., Size-Dependent Bending Analysis of Kirchhoff Nano-Plates Based on a Modified Couple-Stress Theory Including Surface Effects, Int. J. Mech. Sci, vol. 79, pp. 31-37, 2014.

  76. Shishkovsky, I., Sherbakov, V., andPitrov, A., Optimization of the Fine Structure and Flow Behavior of Anisotropic Porous Filters, Synthesized by SLS Method, Int. Conf. Lasers, Appli. Tech. 2007: Laser-Assisted Micro-and Nanotechnologies, vol. 6732, p. 673218,2007.

  77. Shojaeefard, M.H., Saeidi Googarchin, H., Ghadiri, M., and Mahinzare, M., Micro Temperature-Dependent FG Porous Plate: Free Vibration and Thermal Buckling Analysis Using Modified Couple Stress Theory with CPT and FSDT, Appl. Math. Model, vol. 50, pp. 633-655,2017.

  78. Shu, C., Differential Quadrature and Its Application in Engineering, London: Springer London, 2000.

  79. Singh, S. and Harsha, S., Analysis of Porosity Effect on Free Vibration and Buckling Responses for Sandwich Sigmoid Function Based Functionally Graded Material Plate Resting on Pasternak Foundation Using Galerkin Vlasov's Method, J. Sandw. Struct. Mater., vol. 23, no. 5, pp. 1717-1760, 2021.

  80. Stolken, J.S. and Evans, A.G., A Microbend Test Method for Measuring the Plasticity Length Scale, Acta Mater, vol. 46, no. 14, pp. 5109-5115,1998.

  81. Thai, C.H., Ferreira, A., Tran, T., and Phung-Van, P., A Size-Dependent Quasi-3D Isogeometric Model for Functionally Graded Graphene Platelet-Reinforced Composite Microplates Based on the Modified Couple Stress Theory, Compos. Struct., vol. 234, p. 111695,2020.

  82. Thai, H.-T. and Choi, D.-H., Size-Dependent Functionally Graded Kirchhoff and Mindlin Plate Models Based on a Modified Couple Stress Theory, Compos. Struct., vol. 95, pp. 142-153, 2013.

  83. Thai, H.-T. and Kim, S.-E., A Size-Dependent Functionally Graded Reddy Plate Model Based on a Modified Couple Stress Theory, Compos. PartB Eng., vol. 45, no. 1, pp. 1636-1645,2013.

  84. Thai, H.-T., Nguyen, T.-K., Vo, T.P., and Lee, J., Analysis of Functionally Graded Sandwich Plates Using a New First-Order Shear Deformation Theory, Eur. J. Mech. - A/Solids, vol. 45, pp. 211-225,2014.

  85. Thanh, C.-L., Ferreira, A.J.M., and Abdel Wahab, M., A Refined Size-Dependent Couple Stress Theory for Laminated Composite Micro-Plates Using Isogeometric Analysis, Thin-Walled Struct., vol. 145, p. 106427,2019a.

  86. Thanh, C.-L., Tran, L.V., Vu-Huu, T., and Abdel-Wahab, M., The Size-Dependent Thermal Bending and Buckling Analyses of Composite Laminate Microplate Based on New Modified Couple Stress Theory and Isogeometric Analysis, Comput. Methods Appl. Mech. Eng., vol. 350, pp. 337-361, 2019b.

  87. Toupin, R.A., Elastic Materials with Couple-Stresses, Arch. Ration. Mech. Anal, vol. 11, no. 1, pp. 385-414, 1962.

  88. Toupin, R.A., Theories of Elasticity with Couple-Stress, Arch. Ration. Mech. Anal., vol. 17, no. 2, pp. 85-112, 1964.

  89. Wang, X., Differential Quadrature and Differential Quadrature Based Element Methods, Waltham: Elsevier, 2015.

  90. Witvrouw, A. and Mehta, A., The Use of Functionally Graded Poly-SiGe Layers for MEMS Applications, Mater. Sci. Forum, vols. 492-493, pp. 255-260, 2005.

  91. Xue, Y., Jin, G., Ma, X., Chen, H., Ye, T., Chen, M., and Zhang, Y., Free Vibration Analysis of Porous Plates with Porosity Distributions in the Thickness and In-Plane Directions Using Isogeometric Approach, Int. J. Mech. Sci, vol. 152, pp. 346-362, 2019.

  92. Yadroitsev, I., Shishkovsky, I., Bertrand, P., and Smurov, I., Manufacturing of Fine-Structured 3D Porous Filter Elements by Selective Laser Melting, Appl. Surf. Sci, vol. 255, no. 10, pp. 5523-5527, 2009.

  93. Yang, F., Chong, A.C.M., Lam, D.C.C., and Tong, P., Couple Stress Based Strain Gradient Theory for Elasticity, Int. J. Solids Struct., vol. 39, no. 10, pp. 2731-2743, 2002.

  94. Yang, W. and He, D., Bending, Free Vibration and Buckling Analyses of Anisotropic Layered Micro-Plates Based on a New Size-Dependent Model, Compos. Struct., vol. 189, no. 17, pp. 137-147,2018.

  95. Yang, Y., Dong, Y., and Li, Y., Buckling of Piezoelectric Sandwich Microplates with Arbitrary In-Plane BCs Rested on Foundation: Effect of Hygro-Thermo-Electro-Elastic Field, Eur. Phys. J. Plus, vol. 135, no. 1, p. 61, 2020.

  96. Yapor Genao, F., Kim, J., and Zur, K.K., Nonlinear Finite Element Analysis of Temperature-Dependent Functionally Graded Porous Micro-Plates under Thermal and Mechanical Loads, Compos. Struct., vol. 256, p. 112931, 2021.

  97. Yin, L., Qian, Q., Wang, L., and Xia, W., Vibration Analysis of Microscale Plates Based on Modified Couple Stress Theory, Acta Mech. Solida Sin, vol. 23, no. 5, pp. 386-393, 2010.

  98. Zhang, B., He, Y., Liu, D., Gan, Z., and Shen, L., A Non-Classical Mindlin Plate Finite Element Based on a Modified Couple Stress Theory, Eur. J. Mech. - A/Solids, vol. 42, pp. 63-80, 2013.

  99. Zhao, J., Wang, Q., Deng, X., Choe, K., Zhong, R., and Shuai, C., Free Vibrations of Functionally Graded Porous Rectangular Plate with Uniform Elastic Boundary Conditions, Compos. Part B Eng., vol. 168, pp. 106-120,2019.

  100. Zimmerman, R.W., Coupling in Poroelasticity and Thermoelasticity, Int. J. Rock Mech. Min. Sci, vol. 37, nos. 1-2, pp. 79-87, 2000.

Zukünftige Artikel

HYDROMAGNETIC CASSON FLUID FLOW ACROSS AN INCLINED VERTICAL SURFACE IN POROUS CHANNEL WITH BUOYANCY AND THERMO-DIFFUSION EFFECTS Sowmiya C, Rushi Kumar B Effect of Helical Force on Thermal Convection of a Ferrofluid: A Weakly Non-linear Theory Jagathpally Sharathkumar Reddy, Kishan N, Shiva Kumar Reddy G, Ravi Ragoju STABILITY ANALYSIS OF A COUPLE-STRESS FLUID WITH VARIABLE GRAVITY IN A POROUS MEDIUM FOR DIFFERENT CONDUCTING BOUNDARIES Shalu Choudhary, Reeta Devi, Amit Mahajan, Sunil Sunil CREEPING FLOW ABOUT A TAINTED LIQUID DROP WITH A MICROPOLAR FLUID AND ALIGNED IN A POROUS MEDIUM FILLED WITH VISCOUS FLUID UTILISING SLIP PHANI KUMAR MEDURI, VIJAYA LAKSHMI KUNCHE Reviewing the Impact of Magnetic Prandtl Number and Magnetic Force Parameter on Convective Heat Transfer in Boundary Layers Hossam Nabwey, Muhammad Ashraf, Zia Ullah, Ahmed M. Rashad, Ali J. Chamkha Spectral Analysis for Entropy Generation and Irreversibility on NiZnFe_2O_4 – Engine Oil based Fluids RamReddy Chetteti, Sweta ., Pranitha Janapatla Study of global stability of rotating partially-ionized plasma saturating a porous medium Vishal Chandel, Sunil Kumar, Poonam Sharma Porous Medium Influenced Dissipative Hybrid Casson Nanofluid Flow over a Nonlinearly Stretching Sheet under Inclined Ohmic Lorentz Force Field A. R. Deepika, K. Govardhan, Hussain Basha, G Janardhana Reddy Effect of Motile Gyrotactic Microorganisms on Arterial Stenosis Sisko Nanofluid Flow Through Porous Medium : A Numerical Study Galal Moatimid, Mona Mohamed, Khaled Elagamy, Ahmed Gaber ELECTROTHERMOSOLUTAL CONVECTION IN NANOFLUID SATURATING POROUS MEDIUM Pushap Lata Sharma, Mohini Kapalta EFFECT OF VARIABLE GRAVITY ON THERMAL CONVECTION IN ROTATING JEFFREY NANOFLUID: DARCY-BRINKMAN MODEL Deepak Bains, Pushap Lata Sharma, Gian C. Rana Activation energy effect on MHD convective Maxwell nanofluid flow with Cattaneo-Christove heat flux over a porous stretching sheet JYOTHI NAGISETTY, VIJAYA KUMAR AVULA GOLLA Effects of different fins on Maxwell liquid under hybrid surveys of magnetic and porous material in presence of radiation factors Pooya Pasha, Payam Jalili, Bahram Jalili, Loghman Mostafa, Ahmed Mohammed Mahmood, Hussein Abdullah Abbas, D.D. Ganji
Digitales Portal Digitale Bibliothek eBooks Zeitschriften Referenzen und Berichte Forschungssammlungen Preise und Aborichtlinien Begell House Kontakt Language English 中文 Русский Português German French Spain