High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
Erscheint 4 Ausgaben pro Jahr
ISSN Druckformat: 1093-3611
ISSN Online: 1940-4360
IF:
0.4
Immediacy Index:
0.1
Eigenfactor:
0.00005
JCI:
0.07
SJR:
0.198
SNIP:
0.48
CiteScore™::
1.1
H-Index:
20
Indexed in
THERMAL DESIGN OF PLASMA REACTOR WITH A THREE-JET MIXING CHAMBER
Volumen 16,
Ausgabe 2, 2012,
pp. 81-96
DOI: 10.1615/HighTempMatProc.v16.i2.20
ABSTRAKT
Theoretical principles of thermal design of a plasma reactor with a three-jet mixing chamber have been developed. Thermal design and experimental investigations of the plasma reactor have been implemented based on an example of toxic waste processing. Calculated results are compared with the experimental data.
SCHLÜSSELWÖRTER: plasma reactor, three-jet mixing chamber, thermal design, comparison of calculated and experimental results
REFERENZIERT VON
-
Koltunowicz T. N., Zukowski P., Boiko O., Czarnacka K., Bondariev V., Saad A., Larkin A. V., Fedotov A. K., Capacitive properties of nanocomposite (FeCoZr) x (PZT)(100−x) produced by sputtering with the use of argon and oxygen ions beam, Journal of Materials Science: Materials in Electronics, 27, 2, 2016. Crossref
590 Artikelansichten
20 Artikel-Downloads
Metriken
Artikel mit ähnlichem Inhalt:
Neueste Ausgabe
DETERMINATION OF THE MASS BALANCE OF HIGH-CARBON FERROCHROME IN A SUBMERGED ARC FURNACE
RHEOLOGICAL BEHAVIOR AND 3D PRINTING OF HIGHLY FILLED ALUMINA-POLYAMIDE FILAMENTS DURING FUSED DEPOSITION MODELING
SCRATCH TESTING OF ZrN COATING ON TI-6AL-4V TITANIUM ALLOY SURFACE PRELIMINARY TREATED BY COMPRESSION PLASMA FLOWS IMPACT
ELECTRON-BEAM SINTERING OF ZIRCONIUM DIOXIDE/TITANIUM CERAMICS FOR MICROELECTRONICS PRODUCTS
THE EFFECT OF THE FLUORINE CONCENTRATION IN A PLASMA-FORMING GAS MIXTURE ON THE CHEMICAL COMPOSITION, SURFACE CHARGE, AND RELIEF PARAMETERS OF FLUOROCARBON COATINGS ON PET
PREPARATION AND THERMOELECTRIC PROPERTIES OF p-TYPE Ag(1-x)Cu(1+x)Te SAMPLES BY SPARK PLASMA SINTERING METHOD
Zukünftige Artikel
THE QUALITY OF THIN-WALLED STRUCTURES OF AlSi10Mg PRODUCED BY SELECTIVE LASER MELTING
PHYSICAL AND MECHANICAL PROPERTIES AND OPERATIONAL CHARACTERISTICS OF CORONA SPRAYED POWDER COATINGS
Increasing the wear resistance of titanium alloys by deposition of a modifying coating (Zr,Nb)N
Electron-beam synthesis of zirconia ceramic coatings in the forevacuum pressure range
Preparation and Thermoelectric Properties of P-type Ag(1-x)Cu(1+x)Te Samples by SPS Method
The effect of the fluorine concentration in a plasma-forming gas mixture on the chemical composition, surface charge and relief parameters of fluorocarbon coatings on PET
Electron beam sintering of zirconium dioxide/titanium ceramics for microelectronics products