Suscripción a Biblioteca: Guest
Journal of Long-Term Effects of Medical Implants

Publicado 4 números por año

ISSN Imprimir: 1050-6934

ISSN En Línea: 1940-4379

SJR: 0.184 SNIP: 0.485 CiteScore™:: 1.1 H-Index: 39

Indexed in

PMMA: An Essential Material in Medicine and Dentistry

Volumen 15, Edición 6, 2005, pp. 629-639
DOI: 10.1615/JLongTermEffMedImplants.v15.i6.60
Get accessGet access

SINOPSIS

The first use of polymethyl methacrylate (PMMA) as a dental device was for the fabrication of complete denture bases. Its qualities of biocompatibility, reliability, relative ease of manipulation, and low toxicity were soon seized upon and incorporated by many different medical specialties. PMMA has been used for (a) bone cements; (b) contact and intraocular lens; (c) screw fixation in bone; (d) filler for bone cavities and skull defects; and (e) vertebrae stabilization in osteoporotic patients. The many uses of PMMA in the field of medicine will be the focus of this review, with particular attention paid to assessing its physical properties, advantages, disadvantages, and complications. Although numerous new alloplastic materials show promise, the versatility and reliability of PMMA cause it to remain a popular and frequently used material.

CITADO POR
  1. Vollrath Antje, Pretzel David, Pietsch Christian, Perevyazko Igor, Schubert Stephanie, Pavlov George M., Schubert Ulrich S., Preparation, Cellular Internalization, and Biocompatibility of Highly Fluorescent PMMA Nanoparticles, Macromolecular Rapid Communications, 33, 20, 2012. Crossref

  2. Bhat Kalambettu Aravind, Leo Prakash P., Manoharan Niranjanaa, Lakshmibai A., Sangeetha Dharmalingam, Fabrication of polymethyl methacrylate/polysulfone/nanoceramic composites for orthopedic applications, Journal of Applied Polymer Science, 127, 4, 2013. Crossref

  3. Tao Sarah, Young Conan, Redenti Stephen, Zhang Yiqin, Klassen Henry, Desai Tejal, Young Michael J., Survival, migration and differentiation of retinal progenitor cells transplanted on micro-machined poly(methyl methacrylate) scaffolds to the subretinal space, Lab on a Chip, 7, 6, 2007. Crossref

  4. Vollrath Antje, Schubert Stephanie, Schubert Ulrich S., Fluorescence imaging of cancer tissue based on metal-free polymeric nanoparticles – a review, Journal of Materials Chemistry B, 1, 15, 2013. Crossref

  5. Cumpson Peter J., Portoles Jose F., Barlow Anders J., Sano Naoko, Birch Mark, Depth profiling organic/inorganic interfaces by argon gas cluster ion beams: sputter yield data for biomaterials,in-vitrodiagnostic and implant applications, Surface and Interface Analysis, 45, 13, 2013. Crossref

  6. Kostić Milena, Najman Stevo, Najdanović Jelena, Krunić Nebojša, Kostić Ivan, PRIMENA TESTA DIREKTNOG KONTAKTA U ISPITIVANJU CITOTOKSIČNOSTI STOMATOPROTETSKIH AKRILATA, Acta medica medianae, 2013. Crossref

  7. Floroian L., Florescu M., Sima F., Popescu-Pelin G., Ristoscu C., Mihailescu I.N., Synthesis of biomaterial thin films by pulsed laser technologies: Electrochemical evaluation of bioactive glass-based nanocomposite coatings for biomedical applications, Materials Science and Engineering: C, 32, 5, 2012. Crossref

  8. Hautamäki M. P., Puska M., Aho A. J., Kopperud H. M., Vallittu P. K., Surface modification of fiber reinforced polymer composites and their attachment to bone simulating material, Journal of Materials Science: Materials in Medicine, 24, 5, 2013. Crossref

  9. Baset Farhana, Villafranca Ana, Guay Jean-Michel, Bhardwaj Ravi, Femtosecond laser induced porosity in poly-methyl methacrylate, Applied Surface Science, 282, 2013. Crossref

  10. Samavedi Satyavrata, Poindexter Lauren K., Van Dyke Mark, Goldstein Aaron S., Synthetic Biomaterials for Regenerative Medicine Applications, in Regenerative Medicine Applications in Organ Transplantation, 2014. Crossref

  11. Chae Min Ju, Kim Dae Won, Kim Yun Joong, Kweon Hae Yong, Cho Yong-Jun, Choi Soo Young, Lee Hae Ran, Toxicity assessment of a novel silk fibroin and poly-methyl-methacrylate composite material, Molecular & Cellular Toxicology, 10, 3, 2014. Crossref

  12. Sharma Jaishri, Zhang Xi, Sarker Tanusree, Yan Xingru, Washburn Lauren, Qu Honglin, Guo Zhanhu, Kucknoor Ashwinin, Wei Suying, Biocompatible electrospun tactic poly(methyl methacrylate) blend fibers, Polymer, 55, 15, 2014. Crossref

  13. Jiang Fuguang, Deng Ying, Yeh Chih-Ko, Sun Yuyu, Quaternized chitosans bind onto preexisting biofilms and eradicate pre-attached microorganisms, J. Mater. Chem. B, 2, 48, 2014. Crossref

  14. Park Hyung Wook, Lee Ineon, Large pulsed electron beam surface treatment of translucent PMMA, Applied Surface Science, 308, 2014. Crossref

  15. Jiang Fuguang, Yeh Chih-Ko, Wen Jianchuan, Sun Yuyu, N-trimethylchitosan/Alginate Layer-by-Layer Self Assembly Coatings Act as “Fungal Repellents” to Prevent Biofilm Formation on Healthcare Materials, Advanced Healthcare Materials, 4, 3, 2015. Crossref

  16. Tamrin K.F., Nukman Y., Choudhury I.A., Shirley S., Multiple-objective optimization in precision laser cutting of different thermoplastics, Optics and Lasers in Engineering, 67, 2015. Crossref

  17. Chirra Hariharasudhan D., Shao Ling, Ciaccio Natalie, Fox Cade B., Wade Jennifer M., Ma Averil, Desai Tejal A., Planar Microdevices for Enhanced In Vivo Retention and Oral Bioavailability of Poorly Permeable Drugs, Advanced Healthcare Materials, 3, 10, 2014. Crossref

  18. Voltan Rebecca, Castaldello Arianna, Brocca-Cofano Egidio, Altavilla Giuseppe, Caputo Antonella, Laus Michele, Sparnacci Katia, Ensoli Barbara, Spaccasassi Silvia, Ballestri Marco, Tondelli Luisa, Preparation and Characterization of Innovative Protein-coated Poly(Methylmethacrylate) Core-shell Nanoparticles for Vaccine Purposes, Pharmaceutical Research, 24, 10, 2007. Crossref

  19. Coenye T., De Prijck K., De Wever B., Nelis H.J., Use of the modified Robbins device to study thein vitrobiofilm removal efficacy of NitrAdine™, a novel disinfecting formula for the maintenance of oral medical devices, Journal of Applied Microbiology, 105, 3, 2008. Crossref

  20. Bombonato-Prado Karina F., Bellesini Larissa S., Junta Cristina M., Marques Márcia M., Passos Geraldo A., Rosa Adalberto L., Microarray-based gene expression analysis of human osteoblasts in response to different biomaterials, Journal of Biomedical Materials Research Part A, 88A, 2, 2009. Crossref

  21. Dorozhkin Sergey V., Biocomposites and hybrid biomaterials based on calcium orthophosphates, Biomatter, 1, 1, 2011. Crossref

  22. Dimartino Simone, Mather Anton V., Alestra Tommaso, Nawada Suhas, Haber Meir, Experimental and computational analysis of a novel flow channel to assess the adhesion strength of sessile marine organisms, Interface Focus, 5, 1, 2015. Crossref

  23. Zilber Sébastien, Epstein Noah J., Lee Sheen-Woo, Larsen Meegan, Ma Ting, Smith Robert L., Biswal Sandip, Goodman Stuart B., Mouse femoral intramedullary injection model: Technique and microCT scan validation, Journal of Biomedical Materials Research Part B: Applied Biomaterials, 84B, 1, 2008. Crossref

  24. Rakhshan Vahid, Marginal integrity of provisional resin restoration materials: A review of the literature, The Saudi Journal for Dental Research, 6, 1, 2015. Crossref

  25. Carvalho Costa Izelda Maria, Salaro Cristina Paula, Costa Mariana Carvalho, Polymethylmethacrylate Facial Implant: A Successful Personal Experience in Brazil for More Than 9 Years, Dermatologic Surgery, 35, 8, 2009. Crossref

  26. YEH J., Vertebroplasty and kyphoplasty, in Orthopaedic Bone Cements, 2008. Crossref

  27. Zhu Yejun, Chen Yuanwu, Zhang Lei, Li Weiqiang, Huang Baoling, Wu Jingshen, Numerical investigation and dimensional analysis of reaction runaway evaluation for thermal polymerization, Chemical Engineering Research and Design, 104, 2015. Crossref

  28. Yu Jiangbo, Wu Changfeng, Zhang Xuanjun, Ye Fangmao, Gallina Maria Elena, Rong Yu, Wu I-Che, Sun Wei, Chan Yang-Hsiang, Chiu Daniel T., Stable Functionalization of Small Semiconducting Polymer Dots via Covalent Cross-Linking and Their Application for Specific Cellular Imaging, Advanced Materials, 24, 26, 2012. Crossref

  29. Amanat Negin, James Natalie L., McKenzie David R., Welding methods for joining thermoplastic polymers for the hermetic enclosure of medical devices, Medical Engineering & Physics, 32, 7, 2010. Crossref

  30. Sisti Laura, Cruciani Letizia, Totaro Grazia, Vannini Micaela, Berti Corrado, Aloisio Irene, Di Gioia Diana, Antibacterial coatings on poly(fluoroethylenepropylene) films via grafting of 3-hexadecyl-1-vinylimidazolium bromide, Progress in Organic Coatings, 73, 2-3, 2012. Crossref

  31. Takahata Tomohiro, Okihara Takumi, Yoshida Yasuhiro, Yoshihara Kumiko, Shiozaki Yasuyuki, Yoshida Aki, Yamane Kentaro, Watanabe Noriyuki, Yoshimura Masahide, Nakamura Mariko, Irie Masao, Van Meerbeek Bart, Tanaka Masato, Ozaki Toshifumi, Matsukawa Akihiro, Bone engineering by phosphorylated-pullulan and β -TCP composite , Biomedical Materials, 10, 6, 2015. Crossref

  32. Tihan Teodora Gratiela, Ionita Mioara Daniela, Popescu Roxana Gabriela, Iordachescu Dana, Effect of hydrophilic–hydrophobic balance on biocompatibility of poly(methyl methacrylate) (PMMA)–hydroxyapatite (HA) composites, Materials Chemistry and Physics, 118, 2-3, 2009. Crossref

  33. St. John Kenneth R., Biocompatibility of Dental Materials, Dental Clinics of North America, 51, 3, 2007. Crossref

  34. Lin Shan-Yang, Cheng Wen-Ting, Wei Yen-Shan, Lin Hong-Liang, DSC-FTIR microspectroscopy used to investigate the heat-induced intramolecular cyclic anhydride formation between Eudragit E and PVA copolymer, Polymer Journal, 43, 6, 2011. Crossref

  35. Rojo Luis, Vázquez Blanca, Deb Sanjukta, Román Julio San, Eugenol derivatives immobilized in auto-polymerizing formulations as an approach to avoid inhibition interferences and improve biofunctionality in dental and orthopedic cements, Acta Biomaterialia, 5, 5, 2009. Crossref

  36. Bettencourt Ana, Almeida António J., Poly(Methyl Methacrylate) (PMMA): Drug Delivery Applications, in Encyclopedia of Biomedical Polymers and Polymeric Biomaterials, 2015. Crossref

  37. Punet Xavier, Mauchauffé Rodolphe, Rodríguez-Cabello José C., Alonso Matilde, Engel Elisabeth, Mateos-Timoneda Miguel A., Biomolecular functionalization for enhanced cell–material interactions of poly(methyl methacrylate) surfaces, Regenerative Biomaterials, 2, 3, 2015. Crossref

  38. Hossain Anamul, Hossain Altab, Nukman Y., Hassan M. A., Harizam M. Z., Sifullah A. M., Parandoush P., A Fuzzy Logic-Based Prediction Model for Kerf Width in Laser Beam Machining, Materials and Manufacturing Processes, 31, 5, 2016. Crossref

  39. Linan Lamia Zuniga, Nascimento Lima Nádson M., Filho Rubens Maciel, Sabino Marcos A., Kozlowski Mark T., Manenti Flavio, Pilot-scale synthesis and rheological assessment of poly(methyl methacrylate) polymers: Perspectives for medical application, Materials Science and Engineering: C, 51, 2015. Crossref

  40. Akers Peter W., Nelson Andrew R.J., Williams David E., McGillivray Duncan J., Formation of hydrated layers in PMMA thin films in aqueous solution, Applied Surface Science, 353, 2015. Crossref

  41. Mase Jonathan D., Razgoniaev Anton O., Tschirhart Megan K., Ostrowski Alexis D., Light-controlled release of nitric oxide from solid polymer composite materials using visible and near infra-red light, Photochemical & Photobiological Sciences, 14, 4, 2015. Crossref

  42. Bhat Kalambettu Aravind, Rajangam Padmavathi, Dharmalingam Sangeetha, Fabrication and characterization of polymethylmethacrylate/polysulphone/β-tricalcium phosphate composite for orthopaedic applications, Journal of Materials Science, 47, 2, 2012. Crossref

  43. Golz T., Graham C.R., Busch L.C., Wulf J., Winder R.J., Temperature elevation during simulated polymethylmethacrylate (PMMA) cranioplasty in a cadaver model, Journal of Clinical Neuroscience, 17, 5, 2010. Crossref

  44. Pircher Nicole, Fischhuber David, Carbajal Leticia, Strauß Christine, Nedelec Jean‐Marie, Kasper Cornelia, Rosenau Thomas, Liebner Falk, Preparation and Reinforcement of Dual‐Porous Biocompatible Cellulose Scaffolds for Tissue Engineering, Macromolecular Materials and Engineering, 300, 9, 2015. Crossref

  45. Wang Pengtao, Su Junwei, Gong Lin, Shen Mengyan, Ruths Marina, Sun Hongwei, Numerical simulation and experimental study of resonance characteristics of QCM-P devices operating in liquid and their application in biological detection, Sensors and Actuators B: Chemical, 220, 2015. Crossref

  46. Yoon Hyo-Jin, Kim Seong-Eun, Kwon Yong Ku, Kim Eun Jin, Lee Jong-Chan, Lee Yoon-Sik, Synthesis of silver nanostructures on polytetrafluoroethylene (PTFE) using electron beam irradiation for antimicrobacterial effect, Journal of Industrial and Engineering Chemistry, 18, 2, 2012. Crossref

  47. Ereifej Evon S., Khan Saida, Newaz Golam, Zhang Jinsheng, Auner Gregory W., VandeVord Pamela J., Characterization of astrocyte reactivity and gene expression on biomaterials for neural electrodes, Journal of Biomedical Materials Research Part A, 99A, 1, 2011. Crossref

  48. Kostić Milena, Najman Stevo, Najdanović Jelena, Krunić Nebojša, Kostić Ivan, APPLICATION OF DIRECT CONTACT TEST IN EVALUATION OF CYTOTOXICITY OF ACRYLIC DENTURE BASE RESINS, Acta medica medianae, 2012. Crossref

  49. Yu F., Liu J., Yu S., Yang Z., Pan Y., Gao N., Zou Q., Jeon J., Soft polymer-based cantilever probe for AFM nanoindentation of live mammalian cells in liquid, 2015 Transducers - 2015 18th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), 2015. Crossref

  50. Davey Christopher J., Argyros Alexander, Fleming Simon C., Solomon Samuel G., Multimodal optogenetic neural interfacing device fabricated by scalable optical fiber drawing technique, Applied Optics, 54, 34, 2015. Crossref

  51. Yu Fangzhou, Liu Jiangbo, Zhang Xiao, Lin Ai-Lian, Khan Nabeela, Pan Yanbiao, Gao Nan, Zou Qingze, Jeon Jaeseok, Design, fabrication, and characterization of polymer-based cantilever probes for atomic force microscopes, Journal of Vacuum Science & Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena, 34, 6, 2016. Crossref

  52. Patton Alexander J., Poole-Warren Laura A., Green Rylie A., Mechanisms for Imparting Conductivity to Nonconductive Polymeric Biomaterials, Macromolecular Bioscience, 16, 8, 2016. Crossref

  53. Hossain Anamul, Nukman Y., Sifullah A. M., Zhang D., Zi B., Cui G., Ding H., Effect of Process Parameter in Laser Cutting of PMMA Sheet and ANFIS Modelling for Online Control, MATEC Web of Conferences, 77, 2016. Crossref

  54. Sheikh Zeeshan, Najeeb Shariq, Khurshid Zohaib, Verma Vivek, Rashid Haroon, Glogauer Michael, Biodegradable Materials for Bone Repair and Tissue Engineering Applications, Materials, 8, 9, 2015. Crossref

  55. Dorozhkin Sergey, Calcium Orthophosphate-Containing Biocomposites and Hybrid Biomaterials for Biomedical Applications, Journal of Functional Biomaterials, 6, 3, 2015. Crossref

  56. Huh Jung-Bo, Kim Joo-Hyun, Kim Soyun, Lee So-Hyoun, Shim Kyung, Kim Se, Kang Seong, Jeong Chang-Mo, Effects of PMMA and Cross-Linked Dextran Filler for Soft Tissue Augmentation in Rats, International Journal of Molecular Sciences, 16, 12, 2015. Crossref

  57. Lee Jacky Jia Li, Ang Bee Chin, Andriyana Andri, Shariful Md Islam, Amalina M. A., Fabrication of PMMA/zeolite nanofibrous membrane through electrospinning and its adsorption behavior, Journal of Applied Polymer Science, 134, 6, 2017. Crossref

  58. Larrañeta Eneko, Lutton Rebecca E.M., Woolfson A. David, Donnelly Ryan F., Microneedle arrays as transdermal and intradermal drug delivery systems: Materials science, manufacture and commercial development, Materials Science and Engineering: R: Reports, 104, 2016. Crossref

  59. The Major Constituents of Biocomposites and Hybrid Biomaterials for Bone Grafting, in Calcium Orthophosphate-Based Bioceramics and Biocomposites, 2016. Crossref

  60. Borelli Bruna, Zarone Fernando, Rivieccio Virginia, Riccitiello Francesco, Simeone Michele, Sorrentino Roberto, Rengo Sandro, Spagnuolo Gianrico, Procino Alfredo, Polyacrylic resins regulate transcriptional control of interleukin-6, gp80, and gp130 genes in human gingival fibroblasts, Journal of Oral Science, 59, 1, 2017. Crossref

  61. Ferry M., Ngono-Ravache Y., Aymes-Chodur C., Clochard M.C., Coqueret X., Cortella L., Pellizzi E., Rouif S., Esnouf S., Ionizing Radiation Effects in Polymers, in Reference Module in Materials Science and Materials Engineering, 2016. Crossref

  62. EGASHIRA Miki, SUZUKI Takahiro, ORIMOTO Ai, OBATA Tohru, NAKAMURA Hiroshi, TANAKA Motohiro, KANAMORI Takao, KAWAI Tatsushi, Structure-cytotoxicity relationship of methacrylate-based resin monomers as evaluated by an anti-oxidant responsive element-luciferase reporter assay, Dental Materials Journal, 35, 6, 2016. Crossref

  63. Matsuno Hisao, Tsukamoto Ryota, Shimomura Shinichiro, Hirai Tomoyasu, Oda Yukari, Tanaka Keiji, Platelet-adhesion behavior synchronized with surface rearrangement in a film of poly(methyl methacrylate) terminated with elemental blocks, Polymer Journal, 48, 4, 2016. Crossref

  64. Sathya S., Murthy P. Sriyutha, Das Arindam, Gomathi Sankar G., Venkatnarayanan S., Pandian R., Sathyaseelan V.S., Pandiyan V., Doble M., Venugopalan V.P., Marine antifouling property of PMMA nanocomposite films: Results of laboratory and field assessment, International Biodeterioration & Biodegradation, 114, 2016. Crossref

  65. Leclerc Eric, Duval Jean-Luc, Egles Christophe, Ihida Satoshi, Toshiyoshi Hiroshi, Tixier-Mita Agnès, In vitro cyto-biocompatibility study of thin-film transistors substrates using an organotypic culture method, Journal of Materials Science: Materials in Medicine, 28, 1, 2017. Crossref

  66. Soares Flávia Machado Gonçalves, Costa Izelda Maria Carvalho, Lipoatrofia facial associada ao HIV/AIDS: do advento aosconhecimentos atuais, Anais Brasileiros de Dermatologia, 86, 5, 2011. Crossref

  67. Lima A.F.M., Rahal S.C., Muller S.S., Correa M.C.E., Padovani C.R., Propriedades mecânicas do cimento ósseo e da poliuretana de mamona com e sem catalisador, Arquivo Brasileiro de Medicina Veterinária e Zootecnia, 60, 5, 2008. Crossref

  68. Arenas-Arrocena Ma. Concepción, Argueta-Figueroa Liliana, García-Contreras René, Martínez-Arenas Omar, Camacho-Flores Berenice, Rodriguez-Torres María del Pilar, Fuente-Hernández Javier de la, Acosta-Torres Laura S., New Trends for the Processing of Poly(Methyl Methacrylate) Biomaterial for Dental Prosthodontics, in Acrylic Polymers in Healthcare, 2017. Crossref

  69. Žmak I., Ćorić D., Surjak M., Žalac E., Properties of biocomposites from waste seashells and poly(methyl methacrylate), Materialwissenschaft und Werkstofftechnik, 48, 8, 2017. Crossref

  70. Shaegh Seyed Ali Mousavi, Pourmand Adel, Nabavinia Mahboubeh, Avci Huseyin, Tamayol Ali, Mostafalu Pooria, Ghavifekr Habib Badri, Aghdam Esmaeil Najafi, Dokmeci Mehmet Remzi, Khademhosseini Ali, Zhang Yu Shrike, Rapid prototyping of whole-thermoplastic microfluidics with built-in microvalves using laser ablation and thermal fusion bonding, Sensors and Actuators B: Chemical, 255, 2018. Crossref

  71. Zhao Yongliang, Wang Haitao, Zhu Xiaomin, Möller Martin, One-pot formation of monodisperse polymer@SiO2 core–shell nanoparticles via surfactant-free emulsion polymerization using an adaptive silica precursor polymer, Polym. Chem., 8, 40, 2017. Crossref

  72. Li Huizhong, Gale Bruce, Shea Jill, Sant Himanshu, Terry Christi M., Agarwal Jay, Vascular Coupling System for End-to-End Anastomosis: An In Vivo Pilot Case Report, Cardiovascular Engineering and Technology, 8, 1, 2017. Crossref

  73. Korkmaz Emrullah, Onler Recep, Ozdoganlar O. Burak, Micromilling of Poly(methyl methacrylate, PMMA) Using Single-Crystal Diamond Tools, Procedia Manufacturing, 10, 2017. Crossref

  74. Luchinskaya Darya, Du Rong, Owens David M., Tarnow Dennis, Bittner Nurit, Various Surface Treatments to Implant Provisional Restorations and Their Effect on Epithelial Cell Adhesion, Implant Dentistry, 26, 1, 2017. Crossref

  75. Carranza Arturo, Romero-Perez Diego, Almanza-Reyes Horacio, Bogdanchikova Nina, Juarez-Moreno Karla, Pojman John A., Velasquillo Cristina, Mota-Morales Josué D., Nonaqueous Synthesis of Macroporous Nanocomposites Using High Internal Phase Emulsion Stabilized by Nanohydroxyapatite, Advanced Materials Interfaces, 4, 16, 2017. Crossref

  76. Rodriguez-Cabello J. Carlos, Ibáñez Fonseca Arturo, Alonso Matilde, Poocza Leander, Cipriani Filippo, González de Torre Israel, Elastin-Like Polymers: Properties, Synthesis, and Applications, in Encyclopedia of Polymer Science and Technology, 2017. Crossref

  77. Dimartino Simone, Mather Anton V., Nowell-Usticke Jock S., Fischer Brendon, Nock Volker, Investigation of the adhesive from Hormosira banksii germlings and its performance over different material surfaces and topographies, International Journal of Adhesion and Adhesives, 75, 2017. Crossref

  78. Zhengbing Cao , Xinbo Sun , Yuyu Sun , Hao Fong , Rechargeable Antibacterial and Antifungal Polymeric Silver Sulfadiazines, Journal of Bioactive and Compatible Polymers, 24, 4, 2009. Crossref

  79. Su Junwei, Esmaeilzadeh Hamed, Zhang Fang, Yu Qing, Cernigliaro George, Xu Jin, Sun Hongwei, An ultrasensitive micropillar-based quartz crystal microbalance device for real-time measurement of protein immobilization and protein-protein interaction, Biosensors and Bioelectronics, 99, 2018. Crossref

  80. Almaraz G.M. Domínguez, Martínez A. Gutiérrez, Sánchez R. Hernández, Gómez E. Correa, Tapia M. Guzmán, Juárez J.C. Verduzco, Ultrasonic Fatigue Testing on the Polymeric Material PMMA, Used in Odontology Applications, Procedia Structural Integrity, 3, 2017. Crossref

  81. Kwarcinski Jeremy, Boughton Philip, Ruys Andrew, Doolan Alessandra, van Gelder James, Cranioplasty and Craniofacial Reconstruction: A Review of Implant Material, Manufacturing Method and Infection Risk, Applied Sciences, 7, 3, 2017. Crossref

  82. Petrochenko Peter E., Zheng Jiwen, Casey Brendan J., Bayati M. Reza, Narayan Roger J., Goering Peter L., Nanosilver-PMMA composite coating optimized to provide robust antibacterial efficacy while minimizing human bone marrow stromal cell toxicity, Toxicology in Vitro, 44, 2017. Crossref

  83. Chen Fangping, Ma Xiaoyu, Yu Yuanman, Liu Changsheng, Calcium Phosphate Bone Cements: Their Development and Clinical Applications, in Developments and Applications of Calcium Phosphate Bone Cements, 9, 2018. Crossref

  84. Dubey Kumar Abhinav, Chaudhari Chandrashekhar V, Bhardwaj Yatendra Kumar, Varshney Lalit, Polymers, Blends and Nanocomposites for Implants, Scaffolds and Controlled Drug Release Applications, in Advances in Biomaterials for Biomedical Applications, 66, 2017. Crossref

  85. Farias Chantell, Lyman Roman, Hemingway Cecilia, Chau Huong, Mahacek Anne, Bouzos Evangelia, Mobed-Miremadi Maryam, Three-Dimensional (3D) Printed Microneedles for Microencapsulated Cell Extrusion, Bioengineering, 5, 3, 2018. Crossref

  86. Rokaya Dinesh, Srimaneepong Viritpon, Sapkota Janak, Qin Jiaqian, Siraleartmukul Krisana, Siriwongrungson Vilailuck, Polymeric materials and films in dentistry: An overview, Journal of Advanced Research, 14, 2018. Crossref

  87. Arcuri Toni, da Costa Maykson Feitosa Pereira, Ribeiro Iury Machado, Barreto Byron Daia, Lyra eSilva João Paulo, Labial repositioning using polymethylmethracylate (PMMA)-based cement for esthetic smile rehabilitation—A case report, International Journal of Surgery Case Reports, 49, 2018. Crossref

  88. Larrañeta Eneko, Raj Singh Thakur Raghu, Microneedle Manufacturing and Testing, in Microneedles for Drug and Vaccine Delivery and Patient Monitoring, 2018. Crossref

  89. Gill Deepkamal Kaur, Walia Kartikeya, Rawat Aditi, Bajaj Divya, Gupta Vipin Kumar, Gupta Anand, Juneja Mamta, Tuli Rakesh, Jindal Prashant, 3D modelling and printing of craniofacial implant template, Rapid Prototyping Journal, 25, 2, 2019. Crossref

  90. Lazouzi Gamal Ali, Vuksanović Marija M., Tomić Nataša, Petrović Miloš, Spasojević Pavle, Radojević Vesna, Jančić Heinemann Radmila, Dimethyl Itaconate Modified PMMA ‐ Alumina Fillers Composites With Improved Mechanical Properties, Polymer Composites, 40, 5, 2019. Crossref

  91. D’Ovidio Tyler J., Roberts Rebecca M., Gautam Dixa, Marks Zefram D., Saraswathy Manju, Stansbury Jeffrey W., Nair Devatha P., Photopolymerization kinetics of methyl methacrylate with reactive and inert nanogels, Journal of the Mechanical Behavior of Biomedical Materials, 85, 2018. Crossref

  92. Lazouzi Gamal, Vuksanović Marija, Tomić Nataša, Perić Tamara, Volkov-Husović Tatjana, Spasojević Pavle, Jančić-Hainemann Radmila, The influence of the shape and size of the AL2O3 particles on the flexural properties of the PMMA composite modified by the addition of dimethyl itaconate, Tehnika, 73, 5, 2018. Crossref

  93. Kwarcinski Jeremy, Boughton Philip, Ruys Andrew, van Gelder James, The Rapid Templating Process for Large Cranial Defects, in Pre-Clinical and Clinical Methods in Brain Trauma Research, 139, 2018. Crossref

  94. Abbas Hasan, Iqbal Sajid, Ahmad Sharif, Arfin Najmul, Synthesis and characterisation of poly (methylmethacrylate)-silica composites, Materials Research Express, 5, 8, 2018. Crossref

  95. Petrović Milica, Bonvin Debora, Hofmann Heinrich, Mionić Ebersold Marijana, Fungicidal PMMA-Undecylenic Acid Composites, International Journal of Molecular Sciences, 19, 1, 2018. Crossref

  96. Šarac Dušan, Mitrović Nenad, Tanasić Ivan, Tihaček-Šojić Ljiljana, Experimental methodology for analysis of influence of dental implant design on load transfer, FME Transaction, 46, 3, 2018. Crossref

  97. Thomas Roshmi, Snigdha S., Bhavitha K. B., Babu Seethal, Ajith Anjitha, Radhakrishnan E. K., Biofabricated silver nanoparticles incorporated polymethyl methacrylate as a dental adhesive material with antibacterial and antibiofilm activity against Streptococcus mutans, 3 Biotech, 8, 9, 2018. Crossref

  98. Bilal Muhammad, Rasheed Tahir, Ullah Abaid, Iqbal Hafiz M. N., Valorization of Green and Sustainable Advanced Materials from A Biomed Perspective - Potential Applications, in Green and Sustainable Advanced Materials, 2018. Crossref

  99. Lee Jacky Jia Li, Andriyana Andri, Ang Bee Chin, Huneau Bertrand, Verron Erwan, Electrospun PMMA polymer blend nanofibrous membrane: electrospinability, surface morphology and mechanical response, Materials Research Express, 5, 6, 2018. Crossref

  100. Sharifi Roholah, Mahmoudzadeh Soudabe, Islam Mohammad Mirazul, Koza Darrell, Dohlman Claes H., Chodosh James, Gonzalez‐Andrades Miguel, Covalent Functionalization of PMMA Surface with L‐3,4‐Dihydroxyphenylalanine (L‐DOPA) to Enhance its Biocompatibility and Adhesion to Corneal Tissue, Advanced Materials Interfaces, 7, 1, 2020. Crossref

  101. Nesterova A. V., Sergeeva N. S., Sviridova I. K., Smirnov V. V., Kirsanova V. A., Akhmedova S. A., Barinov S. M., Mustafin A. G., Cytocompatibility and Matrix Properties of Surfaces of Nanostructured Calcium Phosphate Cements, Inorganic Materials: Applied Research, 10, 1, 2019. Crossref

  102. Ura Daniel P., Karbowniczek Joanna E., Szewczyk Piotr K., Metwally Sara, Kopyściański Mateusz, Stachewicz Urszula, Cell Integration with Electrospun PMMA Nanofibers, Microfibers, Ribbons, and Films: A Microscopy Study, Bioengineering, 6, 2, 2019. Crossref

  103. Ashor Almabrok A., Vuksanović Marija M., Tomić Nataša Z., Petrović Miloš, Dojčinović Marina, Husović Tatjana Volkov, Radojević Vesna, Heinemann Radmila Jančić, Optimization of modifier deposition on the alumina surface to enhance mechanical properties and cavitation resistance, Polymer Bulletin, 77, 7, 2020. Crossref

  104. Fedosse Zornio Clarice, Livi Sébastien, Duchet-Rumeau Jannick, Gerard Jean-François, Ionic Liquid-Nanostructured Poly(Methyl Methacrylate), Nanomaterials, 9, 10, 2019. Crossref

  105. Carvalho Luana Dutra de, Peres Bernardo Urbanetto, Maezono Hazuki, Shen Ya, Haapasalo Markus, Jackson John, Carvalho Ricardo M, Manso Adriana P, Doxycycline release and antibacterial activity from PMMA/PEO electrospun fiber mats, Journal of Applied Oral Science, 27, 2019. Crossref

  106. Singamneni Sarat, Velu Rajkumar, Behera Malaya Prasad, Scott Sonya, Brorens Peter, Harland Duane, Gerrard Juliet, Selective laser sintering responses of keratin-based bio-polymer composites, Materials & Design, 183, 2019. Crossref

  107. Sun Xin, Wu Zhi, He Dan, Shen Kangping, Liu Xingzhen, Li Haiyan, Jin Wenjie, Bioactive injectable polymethylmethacrylate/silicate bioceramic hybrid cements for percutaneous vertebroplasty and kyphoplasty, Journal of the Mechanical Behavior of Biomedical Materials, 96, 2019. Crossref

  108. Suematsu Masahiro, Suematsu Hiroaki, Minamoto Tomomi, Machida Noboru, Hirao Daiki, Fujiki Makoto, Long‐term outcomes of 54 dogs with tracheal collapse treated with a continuous extraluminal tracheal prosthesis, Veterinary Surgery, 48, 5, 2019. Crossref

  109. Halamish Hen Moshe, Trousil Jiří, Rak Dmytro, Knudsen Kenneth D., Pavlova Ewa, Nyström Bo, Štěpánek Petr, Sosnik Alejandro, Self-assembly and nanostructure of poly(vinyl alcohol)-graft-poly(methyl methacrylate) amphiphilic nanoparticles, Journal of Colloid and Interface Science, 553, 2019. Crossref

  110. Miller Gerald E., Basic Probability Theory for Biomedical Engineers, 2006. Crossref

  111. Williams David F., Specifications for Innovative, Enabling Biomaterials Based on the Principles of Biocompatibility Mechanisms, Frontiers in Bioengineering and Biotechnology, 7, 2019. Crossref

  112. Kostić Milena, Nikolić Ljubiša, Contemporary dental materials, Advanced Technologies, 8, 1, 2019. Crossref

  113. Ziąbka Magdalena, Dziadek Michał, Long-Term Stability of Two Thermoplastic Polymers Modified with Silver Nanoparticles, Nanomaterials, 9, 1, 2019. Crossref

  114. Jain Radhika A., Verma Mahesh, Gupta Rekha, Gill Shubhra, Ghosh Modhupa, Fabrication of a bicomponent hybrid orbital prosthesis, The Journal of Prosthetic Dentistry, 122, 6, 2019. Crossref

  115. Thomaz Raquel Silva, Papaléo Ricardo Meurer, Ion Beam Modification of Poly(methyl methacrylate) (PMMA), in Radiation Effects in Polymeric Materials, 2019. Crossref

  116. Liu Tianyu, Xiang Fangyu, Qi Xiaodong, Yang Weixing, Huang Rui, Fu Qiang, Optically transparent poly(methyl methacrylate) with largely enhanced mechanical and shape memory properties via in-situ formation of polylactide stereocomplex in the matrix, Polymer, 126, 2017. Crossref

  117. De Matteis Valeria, Cascione Mariafrancesca, Toma Chiara Cristina, Albanese Giovanni, De Giorgi Maria Luisa, Corsalini Massimo, Rinaldi Rosaria, Silver Nanoparticles Addition in Poly(Methyl Methacrylate) Dental Matrix: Topographic and Antimycotic Studies, International Journal of Molecular Sciences, 20, 19, 2019. Crossref

  118. Jung Joonhoo, Li Lin, Yeh Chih-Ko, Ren Xuehong, Sun Yuyu, Amphiphilic quaternary ammonium chitosan/sodium alginate multilayer coatings kill fungal cells and inhibit fungal biofilm on dental biomaterials, Materials Science and Engineering: C, 104, 2019. Crossref

  119. Chacur Roberto, Sampaio Menezes Honório, Maria Bordin da Silva Chacur Nívea, Dias Alves Danuza, Cadore Mafaldo Rodrigo, Dias Gomes Leandro, dos Santos Barreto Gisele, Gluteal Augmentation with Polymethyl Methacrylate: A 10-year Cohort Study, Plastic and Reconstructive Surgery - Global Open, 7, 5, 2019. Crossref

  120. Venâncio Cátia, Ferreira Inês, Martins Manuel A., Soares Amadeu M.V.M., Lopes Isabel, Oliveira Miguel, The effects of nanoplastics on marine plankton: A case study with polymethylmethacrylate, Ecotoxicology and Environmental Safety, 184, 2019. Crossref

  121. Forero Ramirez Laura Marcela, Babin Jérôme, Boudier Ariane, Gaucher Caroline, Schmutz Marc, Er-Rafik Mériem, Durand Alain, Six Jean-Luc, Nouvel Cécile, First multi-reactive polysaccharide-based transurf to produce potentially biocompatible dextran-covered nanocapsules, Carbohydrate Polymers, 224, 2019. Crossref

  122. Gu Yuyang, Chen Chuyi, Wang Zeyu, Huang Po-Hsun, Fu Hai, Wang Lin, Wu Mengxi, Chen Yuchao, Gao Tieyu, Gong Jianying, Kwun Jean, Arepally Gowthami M., Huang Tony Jun, Plastic-based acoustofluidic devices for high-throughput, biocompatible platelet separation, Lab on a Chip, 19, 3, 2019. Crossref

  123. Rivera Kristina R., Yokus Murat A., Erb Patrick D., Pozdin Vladimir A., Daniele Michael, Measuring and regulating oxygen levels in microphysiological systems: design, material, and sensor considerations, The Analyst, 144, 10, 2019. Crossref

  124. Lee KangJu, Goudie Marcus J., Tebon Peyton, Sun Wujin, Luo Zhimin, Lee Junmin, Zhang Shiming, Fetah Kirsten, Kim Han-Jun, Xue Yumeng, Darabi Mohammad Ali, Ahadian Samad, Sarikhani Einollah, Ryu WonHyoung, Gu Zhen, Weiss Paul S., Dokmeci Mehmet R., Ashammakhi Nureddin, Khademhosseini Ali, Non-transdermal microneedles for advanced drug delivery, Advanced Drug Delivery Reviews, 165-166, 2020. Crossref

  125. Abdul Majeed S. S. M., Muzaffar Aqib, Deshmukh Kalim, Basheer Ahamed M., Amorphous and Semicrystalline Thermoplastic Polymer Nanocomposites Applied in Biomedical Engineering, in Polymer Nanocomposites in Biomedical Engineering, 2019. Crossref

  126. Hasandoost Leyla, Alhalawani Adel, Rodriguez Omar, Rahimnejad Yazdi Alireza, Zalzal Paul, Schemitsch Emil H., Waldman Stephen D., Papini Marcello, Towler Mark R., Calcium sulfate‐containing glass polyalkenoate cement for revision total knee arthroplasty fixation, Journal of Biomedical Materials Research Part B: Applied Biomaterials, 108, 8, 2020. Crossref

  127. Svoboda Ladislav, Licciardello Nadia, Dvorský Richard, Bednář Jiří, Henych Jiří, Cuniberti Gianaurelio, Design and Performance of Novel Self-Cleaning g-C3N4/PMMA/PUR Membranes, Polymers, 12, 4, 2020. Crossref

  128. Ngo Truc T., Hoffman Lauren, Hoople Gordon D., Trevena William, Shakya Udeema, Barr Gregory, Surface morphology and drug loading characterization of 3D-printed methacrylate-based polymer facilitated by supercritical carbon dioxide, The Journal of Supercritical Fluids, 160, 2020. Crossref

  129. Lebeau Juliana, Efromson John P., Lynch Michael D., A Review of the Biotechnological Production of Methacrylic Acid, Frontiers in Bioengineering and Biotechnology, 8, 2020. Crossref

  130. Kostić Milena, Stanojević Jelena, Tačić Ana, Gligorijević Nikola, Nikolić Ljubiša, Nikolić Vesna, Igić Marko, Bradić Vasić Marija, Determination of residual monomer content in dental acrylic polymers and effect after tissues implantation, Biotechnology & Biotechnological Equipment, 34, 1, 2020. Crossref

  131. Keleştemur Seda, Çobandede Zehra, Çulha Mustafa, Biofilm formation of clinically important microorganisms on 2D and 3D poly (methyl methacrylate) substrates: A surface-enhanced Raman scattering study, Colloids and Surfaces B: Biointerfaces, 188, 2020. Crossref

  132. Poonpiriya Thongchai, Sawaengkit Pornrachanee, Thaweboon Sroisiri, Churnjitapirom Pornkiat, Physical Properties of Vanillin Incorporated Self-Curing Orthodontic Polymethylmethacrylate Resin, Key Engineering Materials, 853, 2020. Crossref

  133. Kumar Sanjeev, Jain Garima, Kumar Kuldeep, Gupta Ashish, Singh B. P., Dhakate S. R., A facile fabrication of poly(methyl methacrylate)/$$\alpha$$-NaYF$$_4$$:Eu$$^{3+}$$ tunable electrospun photoluminescent nanofibers, Applied Nanoscience, 10, 10, 2020. Crossref

  134. Romano Donato, Bloemberg Jette, McGloughlin Tim, Dario Paolo, Stefanini Cesare, Insect Ultra-Structures as Effective Physical-Based Bactericidal Surfaces, IEEE Transactions on Medical Robotics and Bionics, 2, 3, 2020. Crossref

  135. Kwarcinski Jeremy, Boughton Philip, Gelder James, Damodaran Omprakash, Doolan Alessandra, Ruys Andrew, Clinical evaluation of rapid 3D p rint‐formed implants for surgical reconstruction of large cranial defects , ANZ Journal of Surgery, 91, 6, 2021. Crossref

  136. Krukiewicz Katarzyna, Putzer David, Stuendl Nicole, Lohberger Birgit, Awaja Firas, Enhanced Osteogenic Differentiation of Human Primary Mesenchymal Stem and Progenitor Cultures on Graphene Oxide/Poly(methyl methacrylate) Composite Scaffolds, Materials, 13, 13, 2020. Crossref

  137. Li Xin, Tsui Kwong-Hoi, Tsoi James K. H., Green David W., Jin Xiao-zhuang, Deng Yong Qiang, Zhu Yao Min, Li Xu Guang, Fan Zhiyong, Cheung Gary Shun-pan, A nanostructured anti-biofilm surface widens the efficacy against spindle-shaped and chain-forming rod-like bacteria, Nanoscale, 12, 36, 2020. Crossref

  138. Bahrami Bahador, Ayatollahi Majid R., Ghouli Saeid, Theory of critical distance combined with the generalized strain energy density criterion for mixed mode fracture assessment of PMMA dental materials, Procedia Structural Integrity, 28, 2020. Crossref

  139. Walczak Katarzyna, Schierz Georg, Basche Sabine, Petto Carola, Boening Klaus, Wieckiewicz Mieszko, Antifungal and Surface Properties of Chitosan-Salts Modified PMMA Denture Base Material, Molecules, 25, 24, 2020. Crossref

  140. Barzic Andreea Irina, Albu Raluca Marinica, Stoica Iuliana, Surface alteration implications on potential use of semi-alicyclic polyimide as biomedical materials, Applied Surface Science, 540, 2021. Crossref

  141. Powell Sean K., Cruz Rena L. J., Ross Maureen T., Woodruff Maria A., Past, Present, and Future of Soft‐Tissue Prosthetics: Advanced Polymers and Advanced Manufacturing, Advanced Materials, 32, 42, 2020. Crossref

  142. Nafian Fatemeh, Kamali Doust Azad Babak, Yazdani Shahin, Rasaee Mohammad Javad, Daftarian Narsis, A lab‐on‐a‐chip model of glaucoma, Brain and Behavior, 10, 10, 2020. Crossref

  143. Chrószcz Marta, Barszczewska-Rybarek Izabela, Nanoparticles of Quaternary Ammonium Polyethylenimine Derivatives for Application in Dental Materials, Polymers, 12, 11, 2020. Crossref

  144. Zafar Muhammad Sohail, Prosthodontic Applications of Polymethyl Methacrylate (PMMA): An Update, Polymers, 12, 10, 2020. Crossref

  145. Zaokari Younis, Persaud Alicia, Ibrahim Amr, Biomaterials for Adhesion in Orthopedic Applications: A Review, Engineered Regeneration, 1, 2020. Crossref

  146. Wilson Robin E., Denisin Aleksandra K., Dunn Alexander R., Pruitt Beth L., 3D Microwell Platforms for Control of Single Cell 3D Geometry and Intracellular Organization, Cellular and Molecular Bioengineering, 14, 1, 2021. Crossref

  147. Chiang Chao-Ching, Immanuel Philip Nathaniel, Chiu Yi-Hsiung, Huang Song-Jeng, Heterogeneous Bonding of PMMA and Double-Sided Polished Silicon Wafers through H2O Plasma Treatment for Microfluidic Devices, Coatings, 11, 5, 2021. Crossref

  148. Kocacinar Elif, Baydogan Nilgun, Synthesis of Poly(Methyl Methacrylate) Reinforced by Graphene Nanoplates, Key Engineering Materials, 897, 2021. Crossref

  149. Woitschach Franziska, Kloss Marlen, Schlodder Karsten, Rabes Anne, Mörke Caroline, Oschatz Stefan, Senz Volkmar, Borck Alexander, Grabow Niels, Reisinger Emil Christian, Sombetzki Martina, The Use of Zwitterionic Methylmethacrylat Coated Silicone Inhibits Bacterial Adhesion and Biofilm Formation of Staphylococcus aureus, Frontiers in Bioengineering and Biotechnology, 9, 2021. Crossref

  150. Gaines Abiola, Kodali Deepa, Jeelani Shaik, Rangari Vijaya, Characterization and Processing of PMMA/SiO2 Nanocomposite Films and Their Applications, in Coatings, 2021. Crossref

  151. Zupančič Špela, Sinha-Ray Sumit, Sinha-Ray Suman, Kristl Julijana, Yarin Alexander L., Controlled Release of Ciprofloxacin from Core–Shell Nanofibers with Monolithic or Blended Core, Molecular Pharmaceutics, 13, 4, 2016. Crossref

  152. Aumsuwan Nattharika, Heinhorst Sabine, Urban Marek W., Antibacterial Surfaces on Expanded Polytetrafluoroethylene; Penicillin Attachment, Biomacromolecules, 8, 2, 2007. Crossref

  153. Canziani Herbert, Bever Frederik, Sommereyns Alexander, Schmidt Michael, Vogel Nicolas, Roughly Spherical: Tailored PMMA–SiO2 Composite Supraparticles with Optimized Powder Flowability for Additive Manufacturing, ACS Applied Materials & Interfaces, 13, 21, 2021. Crossref

  154. Yu Jia, Gao Yanjing, Jiang Shengling, Sun Fang, Naphthalimide Aryl Sulfide Derivative Norrish Type I Photoinitiators with Excellent Stability to Sunlight under Near-UV LED, Macromolecules, 52, 4, 2019. Crossref

  155. Appusamy Sowmiyadevi, Krishnan Sriram, Gopikrishna M., Raman Sujith, Bio-based Materials for Microwave Devices: A Review, Journal of Electronic Materials, 50, 4, 2021. Crossref

  156. Bhargava Samarth, Chen Lee Serina Siew, Min Ying Lynette Shu, Neo Mei Lin, Lay-Ming Teo Serena, Valiyaveettil Suresh, Fate of Nanoplastics in Marine Larvae: A Case Study Using Barnacles,Amphibalanus amphitrite, ACS Sustainable Chemistry & Engineering, 6, 5, 2018. Crossref

  157. Ko Chia-Hsin, Henschel Cristiane, Meledam Geethu P., Schroer Martin A., Müller-Buschbaum Peter, Laschewsky André, Papadakis Christine M., Self-Assembled Micelles from Thermoresponsive Poly(methyl methacrylate)-b-poly(N-isopropylacrylamide) Diblock Copolymers in Aqueous Solution, Macromolecules, 54, 1, 2021. Crossref

  158. Sosnik Alejandro, Shabo Ronya Ben, Halamish Hen Moshe, Cannabidiol-Loaded Mixed Polymeric Micelles of Chitosan/Poly(Vinyl Alcohol) and Poly(Methyl Methacrylate) for Trans-Corneal Delivery, Pharmaceutics, 13, 12, 2021. Crossref

  159. Bhatnagar Dr. Pratik, Impact of Different Fiber Reinforcement on Flexural Strength, Fracture Toughness and Abrasive Resistance of Provisional Restorative Resin, Journal of Dentistry and Oral Sciences, 2021. Crossref

  160. Marycz Krzysztof, Turlej Eliza, Kornicka-Garbowska Katarzyna, Zachanowicz Emilia, Tomaszewska Anna, Kulpa-Greszta Magdalena, Pązik Robert, Co0.5Mn0.5Fe2O4@PMMA Nanoparticles Promotes Preosteoblast Differentiation through Activation of OPN-BGLAP2-DMP1 Axis and Modulates Osteoclastogenesis under Magnetic Field Conditions, Materials, 14, 17, 2021. Crossref

  161. Evens Tim, Van Hileghem Lorenz, Dal Dosso Francesco, Lammertyn Jeroen, Malek Olivier, Castagne Sylvie, Seveno David, Van Bael Albert, Producing Hollow Polymer Microneedles Using Laser Ablated Molds in an Injection Molding Process, Journal of Micro and Nano-Manufacturing, 9, 3, 2021. Crossref

  162. dos Santos Paulo Bisi, Ribeiro Haroldo Jorge da Silva, Ferreira Armando Costa, Ferreira Caio Campos, Bernar Lucas Pinto, Assunção Fernanda Paula da Costa, de Castro Douglas Alberto Rocha, Santos Marcelo Costa, Duvoisin Sergio, Borges Luiz Eduardo Pizarro, Machado Nélio Teixeira, Process Analysis of PMMA-Based Dental Resins Residues Depolymerization: Optimization of Reaction Time and Temperature, Energies, 15, 1, 2021. Crossref

  163. Ntow-Boahene Winnie, Cook David, Good Liam, Antifungal Polymeric Materials and Nanocomposites, Frontiers in Bioengineering and Biotechnology, 9, 2021. Crossref

  164. Pan Fei, Amarjargal Altangerel, Altenried Stefanie, Liu Mengdi, Zuber Flavia, Zeng Zhihui, Rossi René M, Maniura-Weber Katharina, Ren Qun, Bioresponsive Hybrid Nanofibers Enable Controlled Drug Delivery through Glass Transition Switching at Physiological Temperature, ACS Applied Bio Materials, 4, 5, 2021. Crossref

  165. Bukchin Alexandra, Sanchez-Navarro Macarena, Carrera Adam, Teixidó Meritxell, Carcaboso Angel M., Giralt Ernest, Sosnik Alejandro, Amphiphilic Polymeric Nanoparticles Modified with a Retro-Enantio Peptide Shuttle Target the Brain of Mice, Chemistry of Materials, 32, 18, 2020. Crossref

  166. Soleymani Eil Bakhtiari Sanaz, Bakhsheshi‐Rad Hamid Reza, Karbasi Saeed, Tavakoli Mohamadreza, Hassanzadeh Tabrizi Sayed Ali, Ismail Ahmad Fauzi, Seifalian Alexander, RamaKrishna Seeram, Berto Filippo, Poly(methyl methacrylate) bone cement, its rise, growth, downfall and future, Polymer International, 70, 9, 2021. Crossref

  167. Chelazzi D., Fratini E., Giorgi R., Mastrangelo R., Rossi M., Baglioni P., Gels for the Cleaning of Works of Art, in Gels and Other Soft Amorphous Solids, 1296, 2018. Crossref

  168. Poonpiriya Thongchai, Sawaengkit Pornrachanee, Churnjitapirom Pornkiat, Thaweboon Sroisiri, Water Sorption and Solubility of Vanillin-Incorporated Self-Curing Orthodontic Polymethylmethacrylate Resin, Materials Science Forum, 1020, 2021. Crossref

  169. Zaritski Anna, Castillo-Ecija Helena, Kumarasamy Murali, Peled Ella, Sverdlov Arzi Roni, Carcaboso Ángel M., Sosnik Alejandro, Selective Accumulation of Galactomannan Amphiphilic Nanomaterials in Pediatric Solid Tumor Xenografts Correlates with GLUT1 Gene Expression, ACS Applied Materials & Interfaces, 11, 42, 2019. Crossref

  170. Schlachet Inbar, Sosnik Alejandro, Mixed Mucoadhesive Amphiphilic Polymeric Nanoparticles Cross a Model of Nasal Septum Epithelium in Vitro, ACS Applied Materials & Interfaces, 11, 24, 2019. Crossref

  171. De Mori Arianna, Di Gregorio Emanuela, Kao Alexander Peter, Tozzi Gianluca, Barbu Eugen, Sanghani-Kerai Anita, Draheim Roger R., Roldo Marta, Antibacterial PMMA Composite Cements with Tunable Thermal and Mechanical Properties, ACS Omega, 4, 22, 2019. Crossref

  172. Scarano Antonio, Orsini Tiziana, Di Carlo Fabio, Valbonetti Luca, Lorusso Felice, Graphene-Doped Poly (Methyl-Methacrylate) (Pmma) Implants: A Micro-CT and Histomorphometrical Study in Rabbits, International Journal of Molecular Sciences, 22, 3, 2021. Crossref

  173. Huang Wenqiu, Zhao Ting, Zhu Xiaolin, Ni Ziqi, Guo Xin, Tan Liju, Wang Jiangtao, The effects and mechanisms of polystyrene and polymethyl methacrylate with different sizes and concentrations on Gymnodinium aeruginosum, Environmental Pollution, 287, 2021. Crossref

  174. Woitschach Franziska, Kloss Marlen, Schlodder Karsten, Borck Alexander, Grabow Niels, Reisinger Emil C., Sombetzki Martina, In Vitro Study of the Interaction of Innate Immune Cells with Liquid Silicone Rubber Coated with Zwitterionic Methyl Methacrylate and Thermoplastic Polyurethanes, Materials, 14, 20, 2021. Crossref

  175. Mathew Merin, Shenoy Kamalakanth , K. S. Ravishankar, Evaluation of Porosity and Water Sorption in Conventionally Cured Modified Polymethyl Methacrylate Resin - An In Vitro Study, Journal of Evolution of Medical and Dental Sciences, 10, 13, 2021. Crossref

  176. Bugrov Alexander N., Smyslov Ruslan Yu., Anan’eva Tatyana D., Zavialova Anastasia Yu., Kirilenko Demid A., Almjasheva Oksana V., Soluble and insoluble polymer-inorganic systems based on poly(methyl methacrylate), modified with ZrO2-LnO1.5 (Ln = Eu, Tb) nanoparticles: Comparison of their photoluminescence, Journal of Luminescence, 207, 2019. Crossref

  177. Woitschach Franziska, Kloss Marlen, Schlodder Karsten, Borck Alexander, Grabow Niels, Reisinger Emil Christian, Sombetzki Martina, Bacterial Adhesion and Biofilm Formation of Enterococcus faecalis on Zwitterionic Methylmethacrylat and Polysulfones, Frontiers in Cellular and Infection Microbiology, 12, 2022. Crossref

  178. Céspedes-Valenzuela Daniela N., Sánchez-Rentería Santiago, Cifuentes Javier, Gantiva-Diaz Mónica, Serna Julian A., Reyes Luis H., Ostos Carlos, Cifuentes-De la Portilla Christian, Muñoz-Camargo Carolina, Cruz Juan C., Preparation and Characterization of an Injectable and Photo-Responsive Chitosan Methacrylate/Graphene Oxide Hydrogel: Potential Applications in Bone Tissue Adhesion and Repair, Polymers, 14, 1, 2021. Crossref

  179. Widholz Benedikt, Westhauser Fabian, Biomaterials for angiogenesis applications in an orthopedic context, in Biomaterials for Vasculogenesis and Angiogenesis, 2022. Crossref

  180. Atila Deniz, Hasirci Vasif, Tezcaner Ayşen, Coaxial electrospinning of composite mats comprised of core/shell poly(methyl methacrylate)/silk fibroin fibers for tissue engineering applications, Journal of the Mechanical Behavior of Biomedical Materials, 128, 2022. Crossref

  181. Wang Zhiqian, Paul Sumona, Stein Louis H., Salemi Arash, Mitra Somenath, Recent Developments in Blood-Compatible Superhydrophobic Surfaces, Polymers, 14, 6, 2022. Crossref

  182. Harb Samarah V., Trentin Andressa, Uvida Mayara C., Magnani Marina, Pulcinelli Sandra H., Santilli Celso V., Hammer Peter, A comparative study on PMMA-TiO2 and PMMA-ZrO2 protective coatings, Progress in Organic Coatings, 140, 2020. Crossref

  183. Miller Gerald E., Sensory Organ Replacement and Repair, in Basic Probability Theory for Biomedical Engineers, 2006. Crossref

  184. Alzarrug Faisal Ali, Dimitrijević Marija M., Jančić Heinemann Radmila M., Radojević Vesna, Stojanović Dušica B., Uskoković Petar S., Aleksić Radoslav, The use of different alumina fillers for improvement of the mechanical properties of hybrid PMMA composites, Materials & Design, 86, 2015. Crossref

  185. Yu Jie, Wang Mingwei, Ahmed Rizwan, Zhao Hongyang, Cohen Stuart Martien A., Wang Junyou, Facile Preparation of Tilmicosin-Loaded Polymeric Nanoparticle with Controlled Properties and Functions, ACS Omega, 5, 50, 2020. Crossref

  186. Hayles Andrew, Hasan Jafar, Bright Richard, Wood Jonathan, Palms Dennis, Zilm Peter, Barker Dan, Vasilev Krasimir, Spiked Titanium Nanostructures That Inhibit Anaerobic Dental Pathogens, ACS Applied Nano Materials, 2022. Crossref

  187. Saudi Heba A, Gomaa Hossam M, El-Mosallamy El-Said H, Elkatlawy Saeid M, Optimal radiation shielding capacity and thermal properties of poly(methyl methacrylate) films enhanced with different metal complexes, Polymers and Polymer Composites, 29, 9_suppl, 2021. Crossref

  188. Çınaroğlu Selim, Keleş Hacı, A new technique for preparing cadavers using PMMA: Rat and mouse example, Annals of Anatomy - Anatomischer Anzeiger, 242, 2022. Crossref

  189. Szczęsny Grzegorz, Kopec Mateusz, Politis Denis J., Kowalewski Zbigniew L., Łazarski Adam, Szolc Tomasz, A Review on Biomaterials for Orthopaedic Surgery and Traumatology: From Past to Present, Materials, 15, 10, 2022. Crossref

  190. Lee Christine U., Urban Matthew W., Lee Miller A., Uthamaraj Susheil, Jakub James W., Hesley Gina K., Wood Benjamin G., Brinkman Nathan J., Herrick James L., Larson Nicholas B., Yaszemski Michael J., Greenleaf James F., Twinkling-guided ultrasound detection of polymethyl methacrylate as a potential breast biopsy marker: a comparative investigation, European Radiology Experimental, 6, 1, 2022. Crossref

  191. Ribeiro Andreza Maria, Jarak Ivana, Costa Diana, Veiga Francisco, Figueiras Ana, Polymeric and metal nanostructures for bone regeneration and osteomyelitis treatment, in Advances in Nanotechnology-Based Drug Delivery Systems, 2022. Crossref

  192. Maluta Tommaso, Lavagnolo Umberto, Segalla Lydia, Elena Nicholas, Bernardi Paolo, Degl'Innocenti Daniele, Sbarbati Andrea, Magnan Bruno, Evaluation of biocompatibility, osteointegration and biomechanical properties of the new Calcemex® cement: An <em>in vivo</em> study, European Journal of Histochemistry, 66, 1, 2022. Crossref

  193. Mohamed Omnia, Al-Othman Amani, Al-Nashash Hasan, Tawalbeh Muhammad, Almomani Fares, Rezakazemi Mashallah, Fabrication of titanium dioxide nanomaterial for implantable highly flexible composite bioelectrode for biosensing applications, Chemosphere, 273, 2021. Crossref

  194. Yakovishin Leonid, Tkachenko Ella, Tolstenko Yuliya, Korzh Elena, Development and IR spectroscopic Analysis of Composite Materials Based on Poly(Methyl Methacrylate) and Chitosan, Materials Science Forum, 1065, 2022. Crossref

  195. Soto Fernando, Purcell Emma, Ozen Mehmet Ozgun, Sinawang Prima Dewi, Wang Jie, Akin Demir, Demirci Utkan, Robotic Pill for Biomarker and Fluid Sampling in the Gastrointestinal Tract, Advanced Intelligent Systems, 4, 6, 2022. Crossref

  196. Leslie Heather A., van Velzen Martin J.M., Brandsma Sicco H., Vethaak A. Dick, Garcia-Vallejo Juan J., Lamoree Marja H., Discovery and quantification of plastic particle pollution in human blood, Environment International, 163, 2022. Crossref

  197. Prahasanti Chiquita, Setijanto Darmawan, Savitri Ernawati Diah, Devijanti Ridwan Rini, Buntoro David, Kamadjaja Kamadjaja, Yuliati Anita, Meizarini Asti, Hendrijantini Nike, Krismariono Agung, Kurnia Supandi Shafira, Saskianti Tania, Maya Sitalaksmi Ratri, Kuswanto Djoko, Setiana Putri Tansza, Faradilla Ramadhani Nastiti, Dimas Adiya Ari Muhammad, Patera Nugraha Alexander, Utilization of Polymethyl Methacrylate and Hydroxyapatite Composite as Biomaterial Candidate for Porous Trabecular Dental Implant Fixture Development: A Narrative Review, Research Journal of Pharmacy and Technology, 2022. Crossref

  198. Hussain Wafaa A., Ismail Mukhlis M., Taher Sally, Incorporation of Treated Woven Carbon Fiber to Methacrylate Resin for Heat-Cured Acrylic Denture Composite, Journal of Biomimetics, Biomaterials and Biomedical Engineering, 56, 2022. Crossref

  199. Immanuel Philip Nathaniel, Chiang Chao-Ching, Yang Chung-Rong, Subramani Murugan, Lee Tien-Hsi, Huang Song-Jeng, Surface activation of poly(methyl methacrylate) for microfluidic device bonding through a H2O plasma treatment linked with a low-temperature annealing, Journal of Micromechanics and Microengineering, 31, 5, 2021. Crossref

  200. Moraru Edgar, Dontu Grigore Octavian, Apostolescu Tudor Catalin, Cartal Laurentiu Adrian, Grămescu Bogdan, Dawod Nazem, Aspects Regarding Subtractive and Additive CAD-CAM Processes Applied in Prosthetic Dentistry, in Innovations in Mechanical Engineering II, 2023. Crossref

  201. Glazkova Elena, Bakina Olga, Rodkevich Nikolay, Mosunov Andrey, Evstigneev Maxim, Evstigneev Vladislav, Klimenko Viktor, Lerner Marat, Antibacterial Properties of PMMA Functionalized with CuFe2O4/Cu2O/CuO Nanoparticles, Coatings, 12, 7, 2022. Crossref

  202. Jain Saurabh, Sayed Mohammed E., Shetty Mallika, Alqahtani Saeed M., Al Wadei Mohammed Hussain Dafer, Gupta Shilpi Gilra, Othman Ahlam Abdulsalam Ahmed, Alshehri Abdulkarim Hussain, Alqarni Hatem, Mobarki Abdulaziz Hussain, Motlaq Khalid, Bakmani Haifa F., Zain Asma A., Hakami Abdullah J., Sheayria Moayad F., Physical and Mechanical Properties of 3D-Printed Provisional Crowns and Fixed Dental Prosthesis Resins Compared to CAD/CAM Milled and Conventional Provisional Resins: A Systematic Review and Meta-Analysis, Polymers, 14, 13, 2022. Crossref

  203. Shi Xinfeng, Cantu-Crouch David, Sharma Vinay, Pruitt John, Yao George, Fukazawa Kyoko, Wu James Yuliang, Ishihara Kazuhiko, Surface characterization of a silicone hydrogel contact lens having bioinspired 2-methacryloyloxyethyl phosphorylcholine polymer layer in hydrated state, Colloids and Surfaces B: Biointerfaces, 199, 2021. Crossref

  204. Ozdemir Fatma, Evans Iain, Rankin Kenneth S., Bretcanu Oana, Preliminary evaluation of the in vitro biocompatibility of magnetic bone cement composites, Open Ceramics, 7, 2021. Crossref

  205. Keerthi P.P.S., Sreenivasa Rao M., Numerical simulation of laser micro drilling of polymethyl Methacrylate, Materials Today: Proceedings, 2022. Crossref

  206. Marin Elia, Boschetto Francesco, Zanocco Matteo, Honma Taigi, Zhu Wenliang, Pezzotti Giuseppe, Explorative study on the antibacterial effects of 3D-printed PMMA/nitrides composites, Materials & Design, 206, 2021. Crossref

  207. Gelb Madeline B., Messina Kathryn M. M., Vinciguerra Daniele, Ko Jeong Hoon, Collins Jeffrey, Tamboline Mikayla, Xu Shili, Ibarrondo F. Javier, Maynard Heather D., Poly(trehalose methacrylate) as an Excipient for Insulin Stabilization: Mechanism and Safety, ACS Applied Materials & Interfaces, 14, 33, 2022. Crossref

  208. Mirzaali Mohammad J., Moosabeiki Vahid, Rajaai Seyed Mohammad, Zhou Jie, Zadpoor Amir A., Additive Manufacturing of Biomaterials—Design Principles and Their Implementation, Materials, 15, 15, 2022. Crossref

  209. Widodo Puji, Mulyawan Wawan, Djustiana Nina, Primary study of synthesis and dispersion of zirconia and silica nanoparticles for post-endodontic composite, Journal of Physics: Conference Series, 2344, 1, 2022. Crossref

  210. Salgado Helena, Gomes Ana T. P. C., Duarte Ana S., Ferreira José M. F., Fernandes Carlos, Figueiral Maria Helena, Mesquita Pedro, Antimicrobial Activity of a 3D-Printed Polymethylmethacrylate Dental Resin Enhanced with Graphene, Biomedicines, 10, 10, 2022. Crossref

  211. Kostić Milena, Igić Marko, Gligorijević Nikola, Nikolić Vesna, Stošić Nenad, Nikolić Ljubiša, The Use of Acrylate Polymers in Dentistry, Polymers, 14, 21, 2022. Crossref

  212. Yakovishin L. A., Tkachenko E. V., Composite materials based on dental acrylic plastic and chitosan, Chimica Techno Acta, 8, 4, 2021. Crossref

  213. Prokes Libor, Snejdrova Eva, Soukup Tomas, Malakova Jana, Frolov Vladislav, Loskot Jan, Andrys Rudolf, Kucera Tomas, Allogeneic Bone Impregnated with Biodegradable Depot Delivery Systems for the Local Treatment of Joint Replacement Infections: An In Vitro Study, Molecules, 27, 19, 2022. Crossref

  214. Lai Christopher, Nguyen Ashten, Ye Lynna, Hao Jessica, Koo Hyun, Mante Francis, Ozer Fusun, Antibacterial and Physical Properties of PVM/MA Copolymer- Incorporated Polymethyl Methacrylate as a Novel Antimicrobial Acrylic Resin Material, Molecules, 27, 24, 2022. Crossref

Próximos Artículos

Transfer of guided emergence profile developed using customized provisional implant restoration and cementation using an abutment replica technique- A case report. Vinay Sivaswamy, Balaji Anand S D, Jacob Mathew Philip, C J Venkatakrishnan, Narasimman M, Helen Mary Abraham, Pavithra B Marijuana use is Associated with Increased Rates of Hip Dislocation and Lower Insurance Reimbursement among THA Recipients Andrew Recker, Chukwuweike Gwam, Erin Kelly, Scott Douglas, Johannes Plate Surface modification of Mg alloy AZ91D using nanopowder mixed EDM for Biodegradable Implant Alok Kumar, Abhishek Singh The history of orthopedics in the long term: from general medicine to medical specialties Pavlos Altsitzioglou, Ioannis Zafeiris, Fotini Soucacos, Pantelis Limneos, Eleftheria Souliotis, Evanthia Mitsiokapa, Theodosis Saranteas, Andreas Mavrogenis COMPARISON OF ROUGHNESS, WETTABILITY AND SCANNING ELECTRON MICROSCOPY FEATURES BETWEEN SANDBLASTED ACID-ETCHED AND OXIDIZED TITANIUM DENTAL IMPLANTS Kshitiz Chhabra, Arvina Rajasekar CORRELATION BETWEEN PRIMARY STABILITY OF DENTAL IMPLANTS AND BONE DENSITY: A RETROSPECTIVE ANALYSIS Padmaja S, Arvina Rajasekar C-Reactive Protein and Erythrocyte Sedimentation Rates after total and unicompartmental knee arthroplasty - less implant equals quicker normalization Kasım Kılıçarslan, Ömer Faruk Naldöven, Enejd Veizi, Şahan Güven, Şahin Çepni, Ahmet Fırat COMPLICATIONS FOLLOWING SHORT FEMORAL NAIL FIXATION FOR INTETROCHANTERIC HIP FRACTURES. A RETROSPECTIVE STUDY Anastasia Vasilopoulou, Antonios Trichonas, Konstantinos Palaiologos, Emmanouel Antonogiannakis, Christos Nikakis, Stavros Angelis, Spyridon Maris, Christos Grekas , Efthimios Karadimas, Alexandros Apostolopoulos FEA: Connector Designs and Pontic Stress Distribution of Fixed Partial Denture Implant-Supported Metal Framework Saja Muhsin, Enas Mohammed, Khalid Bander Design and Frequency Stability Analysis of an Adaptive Neuro-Fuzzy Inference System based Artificial Pacemaker Controller in MATLAB Nader Jafarnia Dabanloo, Asghar Dabiriaghdam, Fereidoon Nooshirvan Rahatabad, Keivan Maghooli Complications following intraosseous injections of calcium phosphate bone cement in Subchondroplasty. Christos Zachariadis, Helen Leligou, Stauros Kourkoulis, Evaggelos Magnisalis, Panayiotis Papagelopoulos, Olga Savvidou The Impact of Patient Characteristics on Outcomes of Surgically Managed Vertebral Osteomyelitis in the United States: Insights from a National Database Study Jennifer Kurowicki, Stuart Changoor, Daniel Coban, Neil Patel, Kumar Sinha, Ki Hwang, Arash Emami ASSOCIATION OF AGE, GENDER AND SITE OF IMPLANT PLACEMENT - AN INSTITUTION BASED RETROSPECTIVE STUDY Harini Sri, Nabeel Ahmed, Keerthi Shasanka
Portal Digitalde Biblioteca Digital eLibros Revistas Referencias y Libros de Ponencias Colecciones Precios y Políticas de Suscripcione Begell House Contáctenos Language English 中文 Русский Português German French Spain