INFLUENCE OF ANNEALING TEMPERATURE ON THE STRUCTURE AND PHASE COMPOSITION OF T15K6 HARD ALLOY WITH TITANIUM COATING AFTER TREATMENT BY INTENSE PULSED ELECTRON BEAMS

Vladimir  V. Uglov; Andrej K. Kuleshov; Alexander A. Malashevich; Yurii F.  Ivanov; Nikolay N. Koval

doi:10.1615/HighTempMatProc.2016017189

High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes

Editor en Jefes: Valiantsin M. Astashynski (open in a new tab) Andrey V. Gusarov (open in a new tab)

Editor Asociado: Nikolai N. Cherenda (open in a new tab)

Publicado 4 números por año

ISSN Imprimir: 1093-3611

ISSN En Línea: 1940-4360

Indexed in

INFLUENCE OF ANNEALING TEMPERATURE ON THE STRUCTURE AND PHASE COMPOSITION OF T15K6 HARD ALLOY WITH TITANIUM COATING AFTER TREATMENT BY INTENSE PULSED ELECTRON BEAMS

Volumen 20, Edición 2, 2016, pp. 127-138

DOI: 10.1615/HighTempMatProc.2016017189

Get access

Vladimir V. Uglov
Belarusian State University, Minsk, 220030, Belarus; National Research Tomsk State University, Tomsk, 634050, Russia

Andrej K. Kuleshov
Belarusian State University, 4 Nezavisimosty Ave., Minsk 220030, Belarus; LLC Scientific and Technical Center Vist Group Sensor, 2B Novatorskaya Str., Off. 204, Minsk, 220053, Belarus

Alexander A. Malashevich
Belarusian State University, 4 Nezavisimost Ave., Minsk, 220030, Belarus

Yurii F. Ivanov
National Research Tomsk Polytechnic University, 30 Lenin Ave., Tomsk, 634050, Russia; Institute of High Current Electronics, Siberian Branch of the Russian Academy of Sciences, 2/3 Akademichesky Ave., Tomsk, 634055, Russia

Nikolay N. Koval
Institute of High Current Electronics, Siberian Branch of the Russian Academy of Sciences, 2/3 Akademichesky Ave., Tomsk, 634055, Russia; National Research Tomsk State University, 36 Lenin Ave., Tomsk, 634050, Russia

SINOPSIS

In the present work we investigated the influence of air annealing temperature on the structural and phase states, oxidation resistance of T15K6 hard alloy surface layers with Ti coating after intense pulsed irradiation with electron beams B with an energy density of 40, 60, and 80 J/cm² and pulse duration of 100, 150, and 200 µs. It has been found that samples irradiation leads to phase transformations, namely, to the formation of (Ti, W) and tungsten-enriched (Ti, W)C solid solutions. It is shown that annealing of irradiated samples causes precipitation of WO₃, CoWO₄, and TiO₂ oxide phases. A hard alloy sample irradiated by IPEB with the energy density 40 J/cm² and pulse duration 100 µs is characterized by high oxidation resistance at a temperature of 800°C.

PALABRAS CLAVE: intense pulsed electron beams, hard alloy, surface layer modification, structure, phase composition, oxidation resistance

852 Vistas de artículos 11 Descargas de artículos Métrica

852 PUNTOS DE VISTA 11 DESCARGAS Google
Scholar CITAS

Artículos con contenido similar:

THE FORMATION OF SURFACE Ti-Al-V-Cu ALLOY BY COMBINED ION-PLASMA TREATMENT High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.26, 2022, issue 1
A. V. Basalai, Alexandra B. Petukh, A. P. Laskovnev, Valiantsin M. Astashynski, Nikolai N. Cherenda, Anton M. Kuzmitski, A. Yu. Isobello, Vladimir V. Uglov

AUSTENITIC STEEL SURFACE ALLOYED WITH ZIRCONIUM USING COMPRESSION PLASMA FLOW High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.16, 2012, issue 4
Valiantsin M. Astashynski, Nikolai N. Cherenda, E. A. Kostyukevich, Anton M. Kuzmitski, A. H. Sari, Vladimir V. Uglov, Yu. A. Petukhou

AN INFLUENCE OF PLASMA TREATMENT ON STRUCTURE PROPERTIES OF THIN SiC FILMS ON Si High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.14, 2010, issue 1-2
K. Kh. Nussupov, N. B. Beisenkhanov, Z. M. Amreyeva, Daniya M. Mukhamedshina, Z. B. Omarova, K. A. Mit'

PHASE COMPOSITION MODIFICATION OF THE Cr/Ti SYSTEM BY COMPRESSION PLASMA FLOWS AND HIGH-CURRENT ELECTRON BEAMS High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.17, 2013, issue 2-3
Nikolay N. Koval, Valiantsin M. Astashynski, Nikolai N. Cherenda, Vitali I. Shymanski, Yurii F. Ivanov, Vladimir V. Uglov

RECRYSTALLIZATION PROCESSES IN AUSTENITIC ALLOY PRODUCED BY SELECTIVE LASER MELTING Nanoscience and Technology: An International Journal, Vol.5, 2014, issue 4
E. V. Tsvetkova, K. O. Bazaleeva, E. V. Balakirev

Último edicion

DETERMINATION OF THE MASS BALANCE OF HIGH-CARBON FERROCHROME IN A SUBMERGED ARC FURNACE Sinan Kapan, Unal Camdali, Nevin Celik RHEOLOGICAL BEHAVIOR AND 3D PRINTING OF HIGHLY FILLED ALUMINA-POLYAMIDE FILAMENTS DURING FUSED DEPOSITION MODELING E. Kuznetsova, Y. O. Pristinskiy, E. Bentseva, N.W. Solis Pinargote, Anton Smirnov SCRATCH TESTING OF ZrN COATING ON TI-6AL-4V TITANIUM ALLOY SURFACE PRELIMINARY TREATED BY COMPRESSION PLASMA FLOWS IMPACT Nikolai N. Cherenda, Alexandra B. Petukh, Andrej K. Kuleshov, D. P. Rusalski, N. V. Bibik, Vladimir V. Uglov, Sergey N. Grigoriev, Alexey A. Vereschaka, Valiantsin M. Astashynski, Anton M. Kuzmitski ELECTRON-BEAM SINTERING OF ZIRCONIUM DIOXIDE/TITANIUM CERAMICS FOR MICROELECTRONICS PRODUCTS Aleksandr S. Klimov, I. Yu. Bakeev, A. V. Dolgova, A. A. Kokolov, Efim M. Oks, Aleksey A. Zenin THE EFFECT OF THE FLUORINE CONCENTRATION IN A PLASMA-FORMING GAS MIXTURE ON THE CHEMICAL COMPOSITION, SURFACE CHARGE, AND RELIEF PARAMETERS OF FLUOROCARBON COATINGS ON PET Pavel A. Shchur, T. V. Khodyrev PREPARATION AND THERMOELECTRIC PROPERTIES OF p-TYPE Ag_(1-x)Cu_(1+x)Te SAMPLES BY SPARK PLASMA SINTERING METHOD Shan Cheng, Fanguo Li, Dengxin Wang, Luteng Liu, Shihong Lu ELECTRON-BEAM SYNTHESIS OF ZIRCONIA CERAMIC COATINGS IN THE FOREVACUUM PRESSURE RANGE Yury G. Yushkov, Artem A. Andronov, A. Yu. Nazarov, Efim M. Oks, K. N. Ramazanov, Andrey V. Tyunkov, Denis Zolotukhin INCREASING THE WEAR RESISTANCE OF TITANIUM ALLOYS BY DEPOSITION OF A MODIFYING COATING (Zr,Nb)N Alexey A. Vereschaka, Catherine Sotova, Kirill Makarevich, Natalia Baranova PHYSICAL AND MECHANICAL PROPERTIES AND OPERATIONAL CHARACTERISTICS OF CORONA SPRAYED POWDER COATINGS Marsel Fazlyyyakhmatov

Próximos Artículos

Application of a non-self-sustained glow discharge initiated by a focused electron beam in the forevacuum pressure region for nitriding the inner surface of narrow metal tubes Ilya Bakeev, Aleksandr Klimov, Aleksandr Medovnik, Lionel Joel Ngon A. Kiki, Efim Oks, Aleksey Zenin PLASMA DISCHARGE IN LIQUID MEDIA UNDER THE EFFECT OF ULTRASOUND FOR THE SYNTHESIS OF FILLERS FOR POLYMER COMPOSITES WITH ENHANCED MECHANICAL STRENGTH AND GAS PERMEABILITY Olga Butusova, Mikhail Kaptakov, Arseniy Babaytsev, Nadezhda Okorokova, Boris Garibyan, Serguei Filatov, Nikolay Bulychev THE QUALITY OF THIN-WALLED STRUCTURES OF AlSi10Mg PRODUCED BY SELECTIVE LASER MELTING Tatiana Tarasova, Pavel Podrabinnik, Nikolay Babushkin, Roman Khmyrov, Sergey Grigoriev Electron-beam synthesis of zirconia ceramic coatings in the forevacuum pressure range Yury Yushkov, Artem Andronov, Almas Nazarov, Efim Oks, Kamil Ramazanov, Andrey Tyunkov, Denis Zolotukhin Preparation and Thermoelectric Properties of P-type Ag(1-x)Cu(1+x)Te Samples by SPS Method Fanguo Li The effect of the fluorine concentration in a plasma-forming gas mixture on the chemical composition, surface charge and relief parameters of fluorocarbon coatings on PET Pavel Shchur, Timur Khodyrev Electron beam sintering of zirconium dioxide/titanium ceramics for microelectronics products Aleksandr Klimov, Ilya Bakeev, Anna Dolgova, Andrey Kokolov, Efim Oks, Aleksey Zenin