Publicado 6 números por año
ISSN Imprimir: 1543-1649
ISSN En Línea: 1940-4352
Indexed in
Symmetric Mesomechanical Model for Failure Analysis of Heterogeneous Materials
SINOPSIS
This paper provides a novel reduced-order multiscale modeling methodology for failure analysis of heterogeneous materials. The proposed methodology is based on the computational homogenization method for bridging multiple spatial scales and the eigendeformation-based model reduction method to incorporate failure in the microconstituents and interfaces. This computationally efficient modeling methodology leads to symmetric reduced-order algebraic systems for evaluation of the microscale boundary value problem. The order and coarse graining for the reduced-order system are systematically identified by a novel model development strategy. Verification studies reveal that the proposed methodology efficiently and accurately models the failure response. The proposed approach eliminates the spurious residual stress effect observed in reduced-order models, which pollutes the postfailure stress field at the macroscale.
-
Aboudi, J., A continuum theory for fiber-reinforced elasticviscoplastic composites. DOI: 10.1016/0020-7225(82)90115-X
-
Babuska, I., Homogenization and application: Mathematical and computational problems.
-
Bahei-El-Din, Y. A., Rajendran, A. M., and Zikry, M. A., A micromechanical model for damage progression in woven composite systems. DOI: 10.1016/j.ijsolstr.2003.12.006
-
Belytschko, T., Loehnert, S., and Song, J.-H., Multiscale aggregating discontinuities: A method for circumventing loss of material stability. DOI: 10.1002/nme.2156
-
Benssousan, A., Lions, J. L., and Papanicolaou, G., Asymptotic Analysis for Periodic Structures.
-
Berlyand, L. V. and Kolpakov, A. G., Network approximation in the limit of small interparticle distance of the effective properties of a high-contrast random dispersed composite. DOI: 10.1007/s002050100142
-
Chaboche, J. L., Kruch, S., Maire, J. F., and Pottier, T., Towards a micromechanics based inelastic and damage modeling of composites. DOI: 10.1016/S0749-6419(00)00056-5
-
Dvorak, G. J., Transformation field analysis of inelastic composite materials. DOI: 10.1098/rspa.1992.0063
-
Feyel, F. and Chaboche, J.-L., Fe2 multiscale approach for modelling the elastoviscoplastic behavior of long fiber SiC/Ti composite materials. DOI: 10.1016/S0045-7825(99)00224-8
-
Fish, J., Yu, Q., and Shek, K. L., Computational damage mechanics for composite materials based on mathematical homogenization. DOI: 10.1002/(SICI)1097-0207(19990820)45:11<1657::AID-NME648>3.0.CO;2-H
-
Fish, J. and Fan, R., Mathematical homogenization of nonperiodic heterogeneous media subjected to large deformation transient loading. DOI: 10.1002/nme.2355
-
Geers, M. G. D., Kouznetsova, V., and Brekelmans, W. A. M., Gradient-enhanced computational homogenization for the micro-macro scale transition. DOI: 10.1051/jp4:2001518
-
Ghosh, S., Lee, K., and Raghavan, P., A multi-level computational model for multi-scale damage analysis in composite and porous materials. DOI: 10.1016/S0020-7683(00)00167-0
-
Gosz, M., Moran, B., and Achenbach, J. D., Matrix cracking in transversely loaded fiber composites with compliant interphases.
-
Guedes, J. M. and Kikuchi, N., Preprocessing and postprocessing for materials based on the homogenization method with adaptive finite element methods. DOI: 10.1016/0045-7825(90)90148-F
-
Michel, J. C. and Suquet, P., Computational analysis of nonlinear composite structures using the nonuniform transformation field analysis. DOI: 10.1016/j.cma.2003.12.071
-
Moulinec, H. and Suquet, P., A fast numerical method for computing the linear and nonlinear properties of composites.
-
Nocedal, J. and Wright, S., Numerical Optimization.
-
Oden, J. T. and Prudhomme, S., Goal-oriented error estimation and adaptivity for the finite element method. DOI: 10.1016/S0898-1221(00)00317-5
-
Oskay, C. and Fish, J., Eigendeformation-based reduced order homogenization for failure analysis of heterogeneous materials. DOI: 10.1016/j.cma.2006.08.015
-
Oskay, C. and Fish, J., On calibration and validation of eigendeformation-based multiscale models for failure analysis of heterogeneous systems. DOI: 10.1007/s00466-007-0197-3
-
Sanchez-Palencia, E., Non-homogeneous Media and Vibration Theory. DOI: 10.1007/3-540-10000-8
-
Suquet, P. M., Elements of homogenization for inelastic solid mechanics.
-
Terada, K. and Kikuchi, N., Nonlinear homogenization method for practical applications.
-
Van der Sluis, O., Schreurs, P. J. G., Brekelmans, W.A.M.A.M., and Meijer, H. E. H., Overall behaviour of heterogeneous elastoviscoplastic materials: Effect of microstructural modelling. DOI: 10.1016/S0167-6636(00)00019-3
-
Yvonnet, J. and He, Q. C., The reduced model multiscale method (R3M) for the non-linear homogenization of hyperelastic media at finite strains. DOI: 10.1016/j.jcp.2006.09.019
-
Crouch Robert D., Oskay Caglar, Clay Stephen B., Fast Life Prediction Model for Composites Based on Multiple Temporal Scale Homogenization, 55th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2014. Crossref
-
Zhang Xiang, Oskay Caglar, Eigenstrain based reduced order homogenization for polycrystalline materials, Computer Methods in Applied Mechanics and Engineering, 297, 2015. Crossref
-
Crouch Robert, Oskay Caglar, Accelerated time integrator for multiple time scale homogenization, International Journal for Numerical Methods in Engineering, 101, 13, 2015. Crossref
-
Crouch Robert D., Clay Stephen B., Oskay Caglar, Experimental and computational investigation of progressive damage accumulation in CFRP composites, Composites Part B: Engineering, 48, 2013. Crossref
-
Bogdanor Michael J., Crouch Robert D., Oskay Caglar, Application of Reduced Order Multiscale Homogenization to ‘Assess and Quantify the Benefits of Applying Damage Tolerant Design Principles to Advanced Composite Aircraft Structures’, 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2015. Crossref
-
Oskay C., Multiscale modeling of the response and life prediction of composite materials, in Numerical Modelling of Failure in Advanced Composite Materials, 2015. Crossref
-
Crouch Robert, Oskay Caglar, Clay Stephen, Multiple spatio-temporal scale modeling of composites subjected to cyclic loading, Computational Mechanics, 51, 1, 2013. Crossref
-
Bogdanor Michael J., Oskay Caglar, Clay Stephen B., Multiscale modeling of failure in composites under model parameter uncertainty, Computational Mechanics, 56, 3, 2015. Crossref
-
Hui Tong, Oskay Caglar, A nonlocal homogenization model for wave dispersion in dissipative composite materials, International Journal of Solids and Structures, 50, 1, 2013. Crossref
-
Bogdanor Michael J., Oskay Caglar, Fatigue Life Prediction of IM7/977-3 Composite Laminates with Multispatial/Multitemporal Homogenization, 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2016. Crossref
-
Dhaliwal Gurpinder S., Newaz Golam M., Compression after impact characteristics of carbon fiber reinforced aluminum laminates, Composite Structures, 160, 2017. Crossref
-
Bogdanor Michael, Crouch Robert D., Clay Stephen B., Oskay Caglar, Modeling Rate Dependent Damage Evolution in Composite Structures, 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2013. Crossref
-
Bogdanor Michael J, Oskay Caglar, Prediction of progressive fatigue damage and failure behavior of IM7/977-3 composites using the reduced-order multiple space-time homogenization approach, Journal of Composite Materials, 51, 15, 2017. Crossref
-
Krishnan Arun, Oskay Caglar, Modeling compression-after-impact response of polymer matrix composites subjected to seawater aging, Journal of Composite Materials, 46, 22, 2012. Crossref
-
Bogdanor Michael J, Oskay Caglar, Prediction of progressive damage and strength of IM7/977-3 composites using the Eigendeformation-based homogenization approach: Static loading, Journal of Composite Materials, 51, 10, 2017. Crossref
-
Han Geng, Guan Zhidong, Li Xing, Du Shanyi, Failure analysis of carbon fiber reinforced composite subjected to low velocity impact and compression after impact, Journal of Reinforced Plastics and Composites, 35, 9, 2016. Crossref
-
Hui Tong, Oskay Caglar, Computational modeling of polyurea-coated composites subjected to blast loads, Journal of Composite Materials, 46, 18, 2012. Crossref
-
Paulson Wendy, Oskay Caglar, Prediction of the Behavior of Composite Bolted Joints Using the Eigendeformation-based Reduced Order Homogenization, 2018 AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2018. Crossref
-
Oskay Caglar, Su Zimu, Kapusuzoglu Berkcan, Discrete eigenseparation-based reduced order homogenization method for failure modeling of composite materials, Computer Methods in Applied Mechanics and Engineering, 359, 2020. Crossref
-
Crouch Robert, Oskay Caglar, Clay Stephen, Multiscale Modeling of Damage Accumulation in Carbon Fiber Reinforced Polymers Subjected to Fatigue, 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference<BR>20th AIAA/ASME/AHS Adaptive Structures Conference<BR>14th AIAA, 2012. Crossref
-
Bhattacharyya Rudraprasad, Basu Prodyot K., Multiscale progressive damage analysis of CFRP composites using a mechanics based constitutive relation, Composite Structures, 235, 2020. Crossref
-
Zhang Xiang, Liu Yang, Oskay Caglar, Multiscale Reduced-Order Modeling of a Titanium Skin Panel Subjected to Thermomechanical Loading, AIAA Journal, 2021. Crossref
-
Bhattacharyya Rudraprasad, Adams Douglas, Multiscale analysis of multi-directional composite laminates to predict stiffness and strength in the presence of micro-defects, Composites Part C: Open Access, 6, 2021. Crossref
-
Bhattacharyya Rudraprasad, Mahadevan Sankaran, Basu Prodyot K., Computationally efficient multiscale modeling for probabilistic analysis of CFRP composites with micro-scale spatial randomness, Composite Structures, 280, 2022. Crossref
-
Bhattacharyya Rudraprasad, Basu Prodyot K., Multiscale crack band model for eigenstrain based reduced order homogenization, Computational Mechanics, 66, 6, 2020. Crossref
-
Zhang Xiaofan, O'Brien Daniel J., Ghosh Somnath, Parametrically homogenized continuum damage mechanics (PHCDM) models for unidirectional composites with nonuniform microstructural distributions, Journal of Computational Physics, 435, 2021. Crossref
-
Bogdanor Michael J., Clay Stephen B., Oskay Caglar, Interacting Damage Mechanisms in Laminated Composites Subjected to High Amplitude Fatigue, Journal of Engineering Mechanics, 145, 10, 2019. Crossref
-
Faupel Alex, Oskay Caglar, Modeling the Compression-after-impact Behavior of a Z-pinned Composite Laminate, AIAA Scitech 2021 Forum, 2021. Crossref
-
Lin Min, Liu Yang, Oskay Caglar, Zhang Xiang, Microstructure-Informed Reduced-Order Modeling of Fatigue Initiation in a Titanium Skin Panel Subjected to Thermo-Mechanical Loading, AIAA SCITECH 2022 Forum, 2022. Crossref
-
Zhang Xiaofan, Gao Jinling, O’Brien Daniel J., Chen Weinong, Ghosh Somnath, Parametrically-upscaled continuum damage mechanics (PUCDM) model for multiscale damage evolution in bending experiments of glass-epoxy composites, Composites Part B: Engineering, 228, 2022. Crossref
-
Bhattacharyya Rudraprasad, Mahadevan Sankaran, Calibration and Validation of Multiscale Model for Ultimate Strength Prediction of Composite Laminates Under Uncertainty, ASCE-ASME J Risk and Uncert in Engrg Sys Part B Mech Engrg, 8, 2, 2021. Crossref
-
Faupel Alex, Meshi Ido, Oskay Caglar, Reduced order multiscale model for compression kink-band failure in composites, Journal of Composite Materials, 56, 22, 2022. Crossref
-
Mei Chaosheng, Li Li, Li Xiaobai, Tang Haishan, Han Xiangzhen, Wang Xuelin, Hu Yujin, A nonlocality-based homogenization method for dynamics of metamaterials, Composite Structures, 295, 2022. Crossref