Publicado 12 números por año
ISSN Imprimir: 1044-5110
ISSN En Línea: 1936-2684
Indexed in
CAVITATION IN NOZZLES OF PLAIN ORIFICE ATOMIZERSWITH VARIOUS LENGTH-TO-DIAMETER RATIOS
SINOPSIS
Cavitation in two-dimensional and cylindrical nozzles with various length-to-diameter (L/D) ratios and its effects on liquid jet deformation are investigated by carrying out simultaneous high-speed visualization of the cavitation and jet. The applicability of a modified cavitation number to quantitative prediction of supercavitation formation for nozzles with various L/D ratios is also examined. As a result, the following conclusions are obtained. (1) The modified cavitation number σc can predict supercavitation in nozzles of various shapes and L/D ratios. (2) When cavitation length Lcav is less than twice the nozzle diameter D, the cavitation length normalized by the diameter (Lcav/D), rather than by the nozzle length (Lcav/L), can be expressed as a unique function of σc. (3) Once a cavitation film is formed in long nozzles (L/D ≥ 4), the cavitation zone suddenly extends to near the exit even for very long nozzles (L/D = 8). (4) In short nozzles (L/D = 2), incipient cavitation consisting of tiny bubbles can reach the vicinity of the exit. However, a hydraulic flip instead of a cavitation film is formed even at a low flow rate. (5) In long nozzles (L/D = 8), hydraulic flip does not occur even at very high flow rates, which is preferable for a plain orifice atomizer. (6) Cavitation clouds are shed and collapse near the exit to induce a large deformation of the discharged jet, not only in moderately long (L/D = 4) but also in shorter and longer nozzles.
-
Stanley C., Barber T., Milton B., Rosengarten G., Periodic cavitation shedding in a cylindrical orifice, Experiments in Fluids, 51, 5, 2011. Crossref
-
Abderrezzak Belkacem, Huang Yong, A contribution to the understanding of cavitation effects on droplet formation through a quantitative observation on breakup of liquid jet, International Journal of Hydrogen Energy, 41, 35, 2016. Crossref
-
Choi Sang In, Feng Jia Ping, Seo Ho Seok, Kim Sang Bum, Jo Young Min, Numerical Study of Diesel Atomization Device for Fuel Activation, Journal of Korean Society for Atmospheric Environment, 33, 4, 2017. Crossref
-
Xie Yang, Xu Cang Su, Numerical Study on Internal Nozzle Flow Characteristic of Injector under Hot Fuel Conditions, Applied Mechanics and Materials, 510, 2014. Crossref
-
Kiaoulias D.N., Travis T.A., Moore J.D., Risha G.A., Evaluation of orifice inlet geometries on single liquid injectors through cold-flow experiments, Experimental Thermal and Fluid Science, 103, 2019. Crossref
-
Prasetya Rubby, Sou Akira, Oki Junichi, Nakashima Akira, Nishida Keiya, Wada Yoshitaka, Ueki Yoshiharu, Yokohata Hideaki, Three-dimensional flow structure and string cavitation in a fuel injector and their effects on discharged liquid jet, International Journal of Engine Research, 22, 1, 2021. Crossref
-
PRASETYA Rubby, SOU Akira, WADA Yoshitaka, YOKOHATA Hideaki, Effects of ambient pressure on cavitation in the nozzle and the discharged liquid jet, Journal of Fluid Science and Technology, 14, 1, 2019. Crossref
-
Wen Hua, Jiang Yulong, Ma Jinglong, Effect of Fuel Mass Flow at the End of Injection on Cavitation and Gas Ingestion in the Nozzle, Applied Sciences, 11, 1, 2020. Crossref
-
Bai Wenjie, Tijsseling Arris S., Wang Jun, Duan Quan, Zhang Zaoxiao, Large Eddy Simulation Investigations of Periodic Cavitation Shedding With Special Emphasis on Three-Dimensional Asymmetry in a Scaled-Up Nozzle Orifice, Journal of Fluids Engineering, 143, 7, 2021. Crossref
-
Yang Shangze, Wang Shangning, Sun Zhe, Li Xuesong, Hung David L.S., Xu Min, In-nozzle bubble formation and its effect on fuel jet breakup under cavitating and flash boiling conditions, Applied Thermal Engineering, 183, 2021. Crossref
-
Mohamed Mahmoud Abd El-Aziz, Abdel Hameed Hesham El-sayed, Shaltout Ramy Elsayed, El-Salmawy Hafez Abdel Aal, Prediction of the Impact of Nozzle Geometry on Spray Characteristics, ACS Omega, 6, 9, 2021. Crossref
-
Kolatzki Katharina, Schubert Marie Louise, Ulmer Anatoli, Möller Thomas, Rupp Daniela, Tanyag Rico Mayro P., Micrometer-sized droplets from liquid helium jets at low stagnation pressures, Physics of Fluids, 34, 1, 2022. Crossref
-
Shi Hanqing, Kang Yong, Li Deng, Fang Zhenlong, Effects of the exit aspect ratio of organ-pipe nozzle on the axial pressure oscillation characteristics of self-resonating waterjet, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 234, 23, 2020. Crossref
-
Pratama Raditya Hendra, Huang Weidi, Moon Seoksu, Wang Jin, Murayama Kei, Taniguchi Hiroyoshi, Arima Toshiyuki, Sasaki Yuzuru, Arioka Akira, Hydraulic flip in a gasoline direct injection injector and its effect on injected spray, Fuel, 310, 2022. Crossref
-
Moreira Maria Tereza Cratiú, Martins Evandro, Perrone Ítalo Tuler, Freitas Rosângela, Queiroz Lucas Sales, Carvalho Antônio Fernandes, Challenges associated with spray drying of lactic acid bacteria: Understanding cell viability loss, Comprehensive Reviews in Food Science and Food Safety, 20, 4, 2021. Crossref