High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
Publication de 4 numéros par an
ISSN Imprimer: 1093-3611
ISSN En ligne: 1940-4360
IF:
0.4
Immediacy Index:
0.1
Eigenfactor:
0.00005
JCI:
0.07
SJR:
0.198
SNIP:
0.48
CiteScore™::
1.1
H-Index:
20
Indexed in
FRICTION AND WEAR OF POWDER COATINGS PRODUCED BY USING HIGH-ENERGY PULSED FLOWS
Volume 19,
Numéro 2, 2015,
pp. 141-152
DOI: 10.1615/HighTempMatProc.2016016018
RÉSUMÉ
Friction tests of samples of NiCr/FeCr + TiC, NiCr/FeCr + CaF2/graphite + TiC coatings produced on impacts of highly concentrated energy flow pulses on plastering the SHS reagents are carried out. The wear-resistant and antifriction properties of samples in conditions of friction with boundary lubrication are studied.
MOTS CLÉS: self-propagating high-temperature synthesis, powder coatings, high-energy pulsed flows, friction test
CITÉ PAR
-
Konovalov Sergey, Chen Xizhang, Sarychev Vladimir, Nevskii Sergey, Gromov Victor, Trtica Milan, Mathematical Modeling of the Concentrated Energy Flow Effect on Metallic Materials, Metals, 7, 1, 2016. Crossref
1097 Vues d'articles
10 Téléchargements d'articles
Métrique
Articles avec un contenu similaire:
Dernier numéro
DETERMINATION OF THE MASS BALANCE OF HIGH-CARBON FERROCHROME IN A SUBMERGED ARC FURNACE
RHEOLOGICAL BEHAVIOR AND 3D PRINTING OF HIGHLY FILLED ALUMINA-POLYAMIDE FILAMENTS DURING FUSED DEPOSITION MODELING
SCRATCH TESTING OF ZrN COATING ON TI-6AL-4V TITANIUM ALLOY SURFACE PRELIMINARY TREATED BY COMPRESSION PLASMA FLOWS IMPACT
ELECTRON-BEAM SINTERING OF ZIRCONIUM DIOXIDE/TITANIUM CERAMICS FOR MICROELECTRONICS PRODUCTS
THE EFFECT OF THE FLUORINE CONCENTRATION IN A PLASMA-FORMING GAS MIXTURE ON THE CHEMICAL COMPOSITION, SURFACE CHARGE, AND RELIEF PARAMETERS OF FLUOROCARBON COATINGS ON PET
PREPARATION AND THERMOELECTRIC PROPERTIES OF p-TYPE Ag(1-x)Cu(1+x)Te SAMPLES BY SPARK PLASMA SINTERING METHOD
Prochains articles
PLASMA DISCHARGE IN LIQUID MEDIA UNDER THE EFFECT OF ULTRASOUND FOR THE SYNTHESIS OF FILLERS FOR POLYMER COMPOSITES WITH ENHANCED MECHANICAL STRENGTH AND GAS PERMEABILITY
THE QUALITY OF THIN-WALLED STRUCTURES OF AlSi10Mg PRODUCED BY SELECTIVE LASER MELTING
PHYSICAL AND MECHANICAL PROPERTIES AND OPERATIONAL CHARACTERISTICS OF CORONA SPRAYED POWDER COATINGS
Increasing the wear resistance of titanium alloys by deposition of a modifying coating (Zr,Nb)N
Electron-beam synthesis of zirconia ceramic coatings in the forevacuum pressure range
Preparation and Thermoelectric Properties of P-type Ag(1-x)Cu(1+x)Te Samples by SPS Method
The effect of the fluorine concentration in a plasma-forming gas mixture on the chemical composition, surface charge and relief parameters of fluorocarbon coatings on PET
Electron beam sintering of zirconium dioxide/titanium ceramics for microelectronics products