Publication de 6 numéros par an
ISSN Imprimer: 1940-2503
ISSN En ligne: 1940-2554
Indexed in
SIMULATING PHASE CHANGE HEAT TRANSFER USING COMSOL AND FLUENT: EFFECT OF THE MUSHY-ZONE CONSTANT
RÉSUMÉ
This paper presents a numerical study aimed at understanding the impact of the mushy-zone constant, Amush, on simulated phase change heat transfer. This parameter is found in the Carman-Kozeny equation which is used in the enthalpy-porosity formulation for modeling natural convection driven phase change. The melting of dodecanoic acid inside a rectangular thermal storage unit was simulated in COMSOL 4.4 and FLUENT 15.0; with Amush and the melting temperature range, ΔT, being varied per study. The simulated melt front positions were directly compared to experimental results. Results showed that Amush is an important parameter for accurately modeling phase change heat transfer; in particular, high Amush values corresponded to slower melting rates and the smallest Amush values resulted in unphysical predictions of the melt front development. Additionally, it was concluded that Amush and ΔT are not independent of one another in their roles of accurately modeling the melting rate; different values of ΔT would require different values of Amush to achieve the same melt front development. However, certain combinations of Amush and ΔT do lead to an overall melt fraction progression for the overall process and are in line with the experimental results, although the numerically predicted movement of the melting interface in such cases is not always correlated to the experiment. Further efforts are required to identify ideal values for these parameters, as well as to determine the extent to which these parameters hold for different materials and physical setups. It is anticipated that this paper will lead to further discussion on the significance of the mushy zone as a numerical technique for accurately modeling phase change heat transfer.
-
Fornarelli F., Ceglie V., Fortunato B., Camporeale S.M., Torresi M., Oresta P., Miliozzi A., Numerical simulation of a complete charging-discharging phase of a shell and tube thermal energy storage with phase change material, Energy Procedia, 126, 2017. Crossref
-
Augspurger Mike, Becker Jared, Buchholz James, Udaykumar H.S., Three-dimensional numerical and experimental investigation of the behavior of solar salts within thermal storage devices during phase change, Applied Thermal Engineering, 143, 2018. Crossref
-
Waser R., Ghani F., Maranda S., O'Donovan T.S., Schuetz P., Zaglio M., Worlitschek J., Fast and experimentally validated model of a latent thermal energy storage device for system level simulations, Applied Energy, 231, 2018. Crossref
-
Augspurger Mike, Choi K.K., Udaykumar H.S., Optimizing fin design for a PCM-based thermal storage device using dynamic Kriging, International Journal of Heat and Mass Transfer, 121, 2018. Crossref
-
Mahdi Jasim M., Mohammed Hayder I., Hashim Emad T., Talebizadehsardari Pouyan, Nsofor Emmanuel C., Solidification enhancement with multiple PCMs, cascaded metal foam and nanoparticles in the shell-and-tube energy storage system, Applied Energy, 257, 2020. Crossref
-
Mohamed Moussa El Idi, Karkri Mustapha, A numerical investigation of the effects of metal foam characteristics and heating/cooling conditions on the phase change kinetic of phase change materials embedded in metal foam, Journal of Energy Storage, 26, 2019. Crossref
-
Ebrahimi Amin, Kleijn Chris R., Richardson Ian M., Sensitivity of Numerical Predictions to the Permeability Coefficient in Simulations of Melting and Solidification Using the Enthalpy-Porosity Method, Energies, 12, 22, 2019. Crossref
-
Groulx Dominic, Biwole Pascal H., Bhouri Maha, Phase change heat transfer in a rectangular enclosure as a function of inclination and fin placement, International Journal of Thermal Sciences, 151, 2020. Crossref
-
Mallya Nithin, Haussener Sophia, Buoyancy-driven melting and solidification heat transfer analysis in encapsulated phase change materials, International Journal of Heat and Mass Transfer, 164, 2021. Crossref
-
Yao Yuanpeng, Wu Huiying, Macroscale Modeling of Solid–Liquid Phase Change in Metal Foam/Paraffin Composite: Effects of Paraffin Density Treatment, Thermal Dispersion, and Interstitial Heat Transfer, Journal of Thermal Science and Engineering Applications, 13, 4, 2021. Crossref
-
Hassani Soukht Abandani Mohammadreza, Domiri Ganji Davoud, Melting effect in triplex-tube thermal energy storage system using multiple PCMs-porous metal foam combination, Journal of Energy Storage, 43, 2021. Crossref
-
Moench Sabine, Dittrich Robert, Influence of Natural Convection and Volume Change on Numerical Simulation of Phase Change Materials for Latent Heat Storage, Energies, 15, 8, 2022. Crossref
-
Dallaire Jonathan, Gosselin Louis, Numerical modeling of solid-liquid phase change in a closed 2D cavity with density change, elastic wall and natural convection, International Journal of Heat and Mass Transfer, 114, 2017. Crossref
-
Susantez Çiğdem, Caldeira Aldélio B., Loiola Bruna R., Natural convection effects on TNT solidification inside a shaped charge mold, Defence Technology, 18, 9, 2022. Crossref