Published 4 issues per year
ISSN Print: 2572-4258
ISSN Online: 2572-4266
Indexed in
REGULARITIES OF STRUCTURAL CHANGES AFTER FRICTION STIR PROCESSING IN MATERIALS OBTAINED BY THE ADDITIVE METHOD
ABSTRACT
Nowadays the technologies of obtaining metal materials by additive methods are becoming more and more pertinent. Such technologies may differ from one another by the type of heat source responsible for the material melting in the printing area. By this classification, the techniques are divided into electric arc, laser-, and electron-beam additive processes. According to the method of material feeding to the printing area, metal additive manufacturing technologies are divided into powder and wire technologies. Among the technologies based on direct material feeding into the melting zone, the best results are achieved by wire-feed electron-beam technology with regard to the quality of the material obtained in printing. In this case, in the conditions of electron-beam additive manufacturing of components, the coarse crystalline structure of samples is formed, with a directed growth of dendrites towards heat dissipation, which creates both the possibility of additional use of such features and disadvantages as a material strength at the level of the cast softened structure. Also, in the process of obtaining polymetallic products there is the formation of heterogeneity, which causes a decrease in mechanical or operational properties of the final product. In turn, the method of friction stir processing is widely known as a method of the local structure modification and hardening the material by forming a stir zone with a submicrocrystalline or ultrafine grain structure. To study the possibility of hardening of materials obtained by the electron-beam additive manufacturing method, as well as the removal of defects from products, the structure and mechanical properties of polymetallic materials samples of Cu-Fe system, obtained by the additive manufacturing method and processed by friction stir processing have been studied in this work. Combination of the above-mentioned technologies in the work allowed forming samples of composite structure, with alternation of layers differing by the size of iron particles in the copper matrix, as well as forming samples with more uniform distribution of components structure in the system, which cannot be achieved separately by the additive electron-beam technology. The average grain size in the most finely dispersed layers of samples was less than 250 nm.
-
Abbasi, M., Givi, M., and Bagheri, B., Application of Vibration to Enhance Efficiency of Friction Stir Processing, Trans. Nonferr. Metal. Soc, vol. 29, no. 7, pp. 1393-1400, 2019.
-
Azimi-Roeen, G., Kashani-Bozorg, S.F., Nosko, M., and Svec, P., Reactive Mechanism and Mechanical Properties of In Situ Hybrid Nano-Composites Fabricated from an Al-Fe2O3 System by Friction Stir Processing, Mater. Charact., vol. 127, pp. 279-287, 2017.
-
Basak, A. and Das, S., Epitaxy and Micro structure Evolution in Metal Additive Manufacturing, Annu. Rev. Mater. Res., vol. 46, pp. 125-149, 2016.
-
Debroy, T., Wei, H.L., Zuback, J.S., Mukherjee, T., Elmer, J.W., Milewski, J.O., Beese, A.M., Wilson-Heid, A., De, A., and Zhang, W., Additive Manufacturing of Metallic Components - Process, Structure and Properties, Prog. Mater. Sci., vol. 92, pp. 112-224, 2018.
-
Dixit, M., Newkirk, J.W., and Mishra, R.S., Properties of Friction Stir-Processed Al 1100-NiTi Composite, Scripta Materialia, vol. 56, pp. 541-544, 2007.
-
Du, Z., Tan, M.J., Guo, J.F., Bi, G., and Wei, J., Fabrication of a New Al-Al2O3-CNTs Composite Using Friction Stir Processing (FSP), Mater. Sci. Eng. A, vol. 667, pp. 125-131, 2016.
-
Eliseev, A.A., Fortuna, S.V., Kalashnikova, T.A., Chumaevskii, A.V., and Kolubaev, E.A., Structural Phase Evolution in Ultrasonic-Assisted Friction Stir Welded 2195 Aluminum Alloy Joints, Russ. Phys. J, vol. 60, no. 6, pp. 1022-1026, 2017a.
-
Eliseev, A.A., Fortuna, S.V., Kolubaev, E.A., and Kalashnikova, T.A., Micro structure Modification of 2024 Aluminum Alloy Produced by Friction Drilling, Mater. Sci. Eng. A, vol. 691, pp. 121-125, 2017b.
-
Eliseev, A.A., Kalashnikova, T.A., Gurianov, D.A., Rubtsov, V.E., Ivanov, A.N., and Kolubaev, E.A., Ultrasonic Assisted Second Phase Transformations under Severe Plastic Deformation in Friction Stir Welding of AA2024, Mater. Today Commun, vol. 21, no. 100660, 2019.
-
Gorsse, S., Hutchinson, C., Goune, M., and Banerjee, R., Additive Manufacturing of Metals: A Brief Review of the Characteristic Microstructures and Properties of Steels, Ti-6Al-4V and High-Entropy Alloys, Sci. Technol. Adv. Mater., vol. 18, no. 1, pp. 1-27, 2017.
-
Gunther, J., Brenne, F., Droste, M., Wendler, M., Volkova, O., Biermann, H., and Niendorf, T., Design of Novel Materials for Additive Manufacturing - Isotropic Micro structure and High Defect Tolerance, Sci. Rep, vol. 8, no. 1298, pp. 1-14, 2018.
-
Kalashnikov, K.N., Rubtsov, V.E., Savchenko, N.L., Kalashnikova, T.A., Osipovich, K.S., Eliseev, A.A., and Chumaevskii, A.V., The Effect of Wire Feed Geometry on Electron Beam Freeform 3D Printing of Complex-Shaped Samples from Ti-6Al-4V Alloy, Int. J. Adv. Manuf. Technol., vol. 105, nos. 7-8, pp. 3147-3156, 2019a.
-
Kalashnikov, K.N., Tarasov, S.Y., Chumaevskii, A.V., Fortuna, S.V., Eliseev, A.A., and Ivanov, A.N., Towards Aging in a Multipass Friction Stir-Processed AA2024, Int. J. Adv. Manuf. Technol., vol. 103, nos. 5-8, pp. 2121-2132, 2019b.
-
Kalashnikova, T.A., Gusarova, A.V., Chumaevskii, A.V., Knyazhev, E.O., Shvedov, M.A., and Vasilyev, P.A., Regularities of Composite Materials Formation Using Additive Electron-Beam Technology, Friction Stir Welding and Friction Stir Processing, Metal Working Mater. Sci., vol. 21, no. 4, pp. 94-112, 2019.
-
Kolubaev, A.V., Kolubaev, E.A., Sizova, O.V., Zaikina, A.A., Rubtsov, V.E., Tarasov, S.Y., and Vasiliev, P.A., General Regularities of the Microstructure Formation during Friction Stir Welding and Sliding Friction, J. Frict. Wear, vol. 36, no. 2, pp. 127-131, 2015.
-
Kolubaev, A.V., Tarasov, S.Y., Filippov, A.V., Denisova, Y.A., Kolubaev, E.A., and Potekaev, A.I., The Features of Structure Formation in Chromium-Nickel Steel Manufactured by a Wire-Feed Electron Beam Additive Process, Russ. Phys. J., vol. 61, no. 8, pp. 1491-1498, 2018a.
-
Kolubaev, A.V., Zaikina, A.A., Sizova, O.V., Ivanov, K.V., Filippov, A.V., and Kolubaev, E.A., On the Similarity of Deformation Mechanisms during Friction Stir Welding and Sliding Friction of the AA5056 Alloy, Russ. Phys. J, vol. 60, no. 12, pp. 2123-2129, 2018b.
-
Kolubaev, E.A., Investigation of the Micro structure of Joints of Aluminum Alloys Produced by Friction Stir Welding, Russ. Phys. J, vol. 57, no. 10, pp. 1321-1327, 2015.
-
Kumar, R.A., Ramesh, S., Kedarvignesh, E.S., Arulchelvam, M.S.A., and Anjunath, S., Review of Friction Stir Processing of Magnesium Alloys, Mater. Today: Proc., vol. 16, no. 2, pp. 1320-1324, 2019.
-
Kurtyka, P., Rylko, N., Tokarski, T., Wojcicka, A., and Pietras, A., Cast Aluminum Matrix Composites Modified with Using FSP Process - Changing of the Structure and Mechanical Properties, Compos. Struct., vol. 133, pp. 959-967, 2015.
-
Lee, C.J. and Huang, J.C., High Strain Rate Superplasticity of Mg Based Composites Fabricated by Friction Stir Processing, Mater. Trans., vol. 47, pp. 2773-2778, 2006.
-
Li, N., Huang, S., Zhang, G., Qin, R., Liu, W., Xiong, H., Shi, G., and Blackburn, J., Progress in Additive Manufacturing on New Materials: A Review, J. Mater. Sci. Technol., vol. 35, no. 2, pp. 242-269, 2019.
-
Liu, Q., Ke, L., Liu, F., Huang, C., and Xing, L., Microstructure and Mechanical Property of Multi-Walled Carbon Nanotubes Reinforced Aluminum Matrix Composites Fabricated by Friction Stir Processing, Mater. Design, vol. 45, pp. 343-348, 2013.
-
Liu, W.P. and DuPont, J.N., Fabrication of Functionally Graded TiC/Ti Composites by Laser Engineered Net Shaping, Scripta Materialia, vol. 48, no. 9, pp. 1337-1342, 2003.
-
Ma, Z.Y., Friction Stir Processing Technology: A Review, Metall. Mater. Trans. A, vol. 39, no. 3, pp. 642-658, 2008.
-
Malopheyev, S., Kulitskiy, V., Mironov, S., Zhemchuzhnikova, D., and Kaibyshev, R., Friction-Stir Welding of an Al-Mg-Sc-Zr Alloy in As-Fabricated and Work-Hardened Conditions, Mater. Sci. Eng. A, vol. 600, pp. 159-170, 2014.
-
Malopheyev, S., Mironov, S., Kulitskiy, V., and Kaibyshev, R., Friction-Stir Welding of Ultra-Fine Grained Sheets of Al-Mg-Sc-Zr Alloy, Mater. Sci. Eng. A, vol. 624, pp. 132-139, 2015.
-
Malopheyev, S., Mironov, S., Vysotskiy, I., and Kaibyshev, R., Superplasticity of Friction-Stir Welded Al-Mg-Sc Sheets with Ultrafine-Grained Microstructure, Mater. Sci. Eng. A, vol. 649, pp. 85-92, 2016.
-
Morisada, Y., Fujii, H., Nagaoka, T., Nogi, K., and Fukusumi, M., Fullerene/A5083 Composites Fabricated by Material Flow during Friction Stir Processing, Compos. Part A-Appl. S., vol. 38, pp. 2097-2101, 2007.
-
Ni, D.R., Wang, J.J., Zhou, Z.N., and Ma, Z.Y., Fabrication and Mechanical Properties of Bulk NiTip/Al Composites Prepared by Friction Stir Processing, J. Alloys Compd., vol. 586, pp. 368-374, 2014.
-
Osipovich, K.S., Chumaevskii, A.V., Eliseev, A.A., Kalashnikov, K.N., Kolubaev, E.A., Rubtsov, V.E., and Astafurova, E.G., Peculiarities of Structure Formation in Copper/Steel Bimetal Fabricated by Electron-Beam Additive Technology, Russ. Phys. J., vol. 62, no. 8, pp. 1486-1494, 2019.
-
Qin, P.T., Damodaram, R., Maity, T., Zhang, W.W., Yang, C., Wang, Z., and Prashanth, K.G., Friction Welding of Electron Beam Melted Ti-6Al-4V, Mater. Sci. Eng. A, vol. 761, no. 138045, 2019.
-
Rubino, F., Scherillo, F., Franchitti, S., Squillace, A., Astarita, A., and Carlone, P., Microstructure and Surface Analysis of Friction Stir Processed Ti-6Al-4V Plates Manufactured by Electron Beam Melting, J. Manuf. Process., vol. 37, pp. 392-401, 2019.
-
Singh, A.K., Kumar, B., Jha, K., Astarita, A., Squillace, A., Franchitti, S., and Arora, A., Friction Stir Welding of Additively Manufactured Ti-6Al-4V. Microstructure and Mechanical Properties, J. Mater. Process. Technol, vol. 277, no. 116433, 2019.
-
Singh, S.K., Immanuel, R.J., Babu, S., Panigrahi, S.K., and Janaki Ram, G.D., Influence of MultiPass Friction Stir Processing on Wear Behavior and Machinability of an Al-Si Hypoeutectic A356 Alloy, J. Mater. Process. Technol., vol. 236, pp. 252-262, 2017.
-
Smolin, A.Y., Shilko, E.V., Astafurov, S.V., Kolubaev, E.A., Eremina, G.M., and Psakhie, S.G., Understanding the Mechanisms of Friction Stir Welding Based on Computer Simulation Using Particles, Defence Technol., vol. 14, no. 6, pp. 643-656, 2018.
-
Sun, K., Shi, Q.Y., Sun, Y.J., and Chen, G.Q., Microstructure and Mechanical Property of Nano-SiCp Reinforced High Strength Mg Bulk Composites Produced by Friction Stir Processing, Mater. Sci. Eng. A, vol. 547, pp. 32-37, 2012.
-
Tarasov, S.Y., Filippov, A.V., Savchenko, N.L., Fortuna, S.V., Rubtsov, V.E., Kolubaev, E.A., and Psakhie, S.G., Effect of Heat Input on Phase Content, Crystalline Lattice Parameter, and Residual Strain in Wire-Feed Electron Beam Additive Manufactured 304 Stainless Steel, Int. J. Adv. Manuf. Technol, vol. 99, nos. 9-12, pp. 2353-2363, 2018a.
-
Tarasov, S.Y., Filippov, A.V., Shamarin, N.N., Fortuna, S.V., Maier, G.G., and Kolubaev, E.A., Microstructural Evolution and Chemical Corrosion of Electron Beam Wire-Feed Additively Manufactured AISI 304 Stainless Steel, J. Alloys Compd., vol. 803, pp. 364-370, 2019.
-
Tarasov, S.Y., Rubtsov, V.E., Fortuna, S.V., Eliseev, A.A., Chumaevsky, A.V., Kalashnikova, T.A., and Kolubaev, E.A., Ultrasonic-Assisted Aging in Friction Stir Welding on Al-Cu-Li-Mg Aluminum Alloy, Weld. World, vol. 61, no. 4, pp. 679-690, 2017.
-
Tarasov, S.Y., Rubtsov, V.E., Kolubaev, E.A., Gnyusov, S.F., and Kudinov, Y.A., Radioscopy of Remnant Joint Line in a Friction Stir Welded Seam, Russ. J. Nondestr. Test., vol. 51, no. 9, pp. 573-579, 2018b.
-
Wang, J., Pan, Z., Ma, Y., Lu, Y., Shen, C., Cuiuri, D., and Li, H., Characterization of Wire Arc Additively Manufactured Titanium Aluminide Functionally Graded Material: Micro structure, Mechanical Properties and Oxidation Behavior, Mater. Sci. Eng. A, vol. 734, pp. 110-119, 2018.
-
Wang, W., Shi, Q.-Y., Liu, P., Li, H.-K., and Li, T., A Novel Way to Produce Bulk SiCp Reinforced Aluminum Metal Matrix Composites by Friction Stir Processing, J. Mater. Process. Technol., vol. 209, pp. 2099-2103, 2009.
-
Wang, Z., Palmer, T.A., and Beese, A.M., Effect of Processing Parameters on Microstructure and Tensile Properties of Austenitic Stainless Steel 304L Made by Directed Energy Deposition Additive Manufacturing, Acta Materialia, vol. 110, pp. 226-235, 2016.
-
Gusarova Anastasiya, Chumaevskii Andrey, Gurianov Denis, Kalashnikova Tatiana, Zykova Anna P., Panfilov Aleksandr, Nikonov Sergey, Osipovich Ksenia, Obtaining of Copper- and Nickel-Based Polymetallic Gradient Products by Wire-Feed Electron Beam Additive Manufacturing, Materials Science Forum, 1049, 2022. Crossref
-
Grigoriev Sergey N., Gusarov Andrey V., Metel Alexander S., Tarasova Tatiana V., Volosova Marina A., Okunkova Anna A., Gusev Andrey S., Beam Shaping in Laser Powder Bed Fusion: Péclet Number and Dynamic Simulation, Metals, 12, 5, 2022. Crossref