High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
Published 4 issues per year
ISSN Print: 1093-3611
ISSN Online: 1940-4360
IF:
0.4
Immediacy Index:
0.1
Eigenfactor:
0.00005
JCI:
0.07
SJR:
0.198
SNIP:
0.48
CiteScore™::
1.1
H-Index:
20
Indexed in
Volume 4, 2000 Issue 3
DOI: 10.1615/HighTempMatProc.v4.i3
METALLURGICAL APPLIKATIONS OF HIGH POWER ARS HEATING SYSTEMS
14 pages
DOI: 10.1615/HighTempMatProc.v4.i3.10
OXIDATION OF STAINLESS STEEL PARTICLES WITH AND WITHOUT AN ALUMINA SHELL DURING THEIR FLIGHT IN A PLASMA JET
16 pages
DOI: 10.1615/HighTempMatProc.v4.i3.20
ON THE OXIDATION OF Ni-23Co-17Cr-12AI-0.5Y-ALLOY SERVING AS BOND COAT IN THERMAL BARRIER COATINGS
12 pages
DOI: 10.1615/HighTempMatProc.v4.i3.30
CONTACT ANGLE AND SURFACE TENSION MEASUREMENTS ON A METAL DROP BY IMAGE PROCESSING AND NUMERICAL CALCULATION
14 pages
DOI: 10.1615/HighTempMatProc.v4.i3.40
HEAT TRANSFER FROM OXYGEN ATOMS RECOMBINATION ON SILICON CARBIDE: CHEMICAL EVOLUTION OF THE MATERIAL SURFASE
14 pages
DOI: 10.1615/HighTempMatProc.v4.i3.50
PLASMA-ASSISTED DEPOSITION OF NANOSTRUCTURED FILMS AND COATINGS
6 pages
DOI: 10.1615/HighTempMatProc.v4.i3.60
STANDARD THERMODYNAMIC FUNCTIONS OF DIATOMIC PRODUCTS OF THERMAL DECOMPOSITION OF SF6
20 pages
DOI: 10.1615/HighTempMatProc.v4.i3.70
SOLAR THERMAL PRODUCTION OF ZINC: PROGRAM STRATEGY AND STATUS OF RESEARCH
12 pages
DOI: 10.1615/HighTempMatProc.v4.i3.80
SOLAR THERMOCHEMICAL PROCESSING: CHALLENGES AND CHANGES
14 pages
DOI: 10.1615/HighTempMatProc.v4.i3.90
PHASE EQUILIBRIA AND STRUCTURE IN THE Na3AlF6-Na2B4O7-TiO2 SYSTEM
10 pages
DOI: 10.1615/HighTempMatProc.v4.i3.100
MULTISTEP PROCESSES IN THE ELECTRODEPOSITION OF REFRACTORY METALS IN MOLTEN CHLORIDES
14 pages
DOI: 10.1615/HighTempMatProc.v4.i3.110
Latest Issue
DETERMINATION OF THE MASS BALANCE OF HIGH-CARBON FERROCHROME IN A SUBMERGED ARC FURNACE
RHEOLOGICAL BEHAVIOR AND 3D PRINTING OF HIGHLY FILLED ALUMINA-POLYAMIDE FILAMENTS DURING FUSED DEPOSITION MODELING
SCRATCH TESTING OF ZrN COATING ON TI-6AL-4V TITANIUM ALLOY SURFACE PRELIMINARY TREATED BY COMPRESSION PLASMA FLOWS IMPACT
ELECTRON-BEAM SINTERING OF ZIRCONIUM DIOXIDE/TITANIUM CERAMICS FOR MICROELECTRONICS PRODUCTS
THE EFFECT OF THE FLUORINE CONCENTRATION IN A PLASMA-FORMING GAS MIXTURE ON THE CHEMICAL COMPOSITION, SURFACE CHARGE, AND RELIEF PARAMETERS OF FLUOROCARBON COATINGS ON PET
PREPARATION AND THERMOELECTRIC PROPERTIES OF p-TYPE Ag(1-x)Cu(1+x)Te SAMPLES BY SPARK PLASMA SINTERING METHOD
ELECTRON-BEAM SYNTHESIS OF ZIRCONIA CERAMIC COATINGS IN THE FOREVACUUM PRESSURE RANGE
INCREASING THE WEAR RESISTANCE OF TITANIUM ALLOYS BY DEPOSITION OF A MODIFYING COATING (Zr,Nb)N
PHYSICAL AND MECHANICAL PROPERTIES AND OPERATIONAL CHARACTERISTICS OF CORONA SPRAYED POWDER COATINGS
Forthcoming Articles
Review of some schemes for compact particle and neutron sources under laser emission
Application of a non-self-sustained glow discharge initiated by a focused electron beam in the forevacuum pressure region for nitriding the inner surface of narrow metal tubes
PLASMA DISCHARGE IN LIQUID MEDIA UNDER THE EFFECT OF ULTRASOUND FOR THE SYNTHESIS OF FILLERS FOR POLYMER COMPOSITES WITH ENHANCED MECHANICAL STRENGTH AND GAS PERMEABILITY
THE QUALITY OF THIN-WALLED STRUCTURES OF AlSi10Mg PRODUCED BY SELECTIVE LASER MELTING
Electron-beam synthesis of zirconia ceramic coatings in the forevacuum pressure range
Preparation and Thermoelectric Properties of P-type Ag(1-x)Cu(1+x)Te Samples by SPS Method
The effect of the fluorine concentration in a plasma-forming gas mixture on the chemical composition, surface charge and relief parameters of fluorocarbon coatings on PET
Electron beam sintering of zirconium dioxide/titanium ceramics for microelectronics products