Published 4 issues per year
ISSN Print: 1093-3611
ISSN Online: 1940-4360
Indexed in
MIXING IN TI/STEEL SYSTEM UNDER HIGH-INTENSITY PULSED ION BEAM IMPACT
ABSTRACT
The structure, phase, element composition, and surface morphology of Ti/steel systems subjected to the treatment of high-intensity pulsed ion beams were investigated in this work. Numerical simulation, scanning electron microscopy, energy dispersion x-ray microanalysis, and x-ray diffraction analysis were used as investigation techniques. Ion beam impact with a Ti/steel system was accompanied with surface layer ablation, melting, mixing, and generation of shock waves. The findings showed that mixing efficiency was dependent on the power of the ion beam and the number of pulses. The synthesis of the mixed layer with a thickness of ~ 2 μm containing FeTi and Fe2Ti phases was observed just after one pulse of treatment, with the energy absorbed by the surface layer of 3.1 J/cm2. Ti concentration in the surface layer, as well as intermetallide volume fraction, was dependent on the number of pulses. Growth of the pulse number led to more uniform distribution of Ti in the mixed layer. The synthesized surface layer possessed increased microhardness.
-
Adelfar, R., Mirzadeh, H., Ataie, A., and Malekan, M., Amorphization and Mechano-Crystallization of High-Energy Ball Milled FeTi Alloys, J. Non-Cryst. Solids, vol. 520, p. 119466, 2019.
-
Balogh, J., Rodmacq, B., and Chamberod, A., Metastable Phase Formation at the Interface of Compositionally Modulated Fe-Ti Films, Solid State Commun., vol. 66, no 2, pp.143-147, 1988.
-
Benyelloul, K., Bouhadda, Y., Bououdina, M., Faraoun, H.I., Aourag, H., and Seddik, L., The Effect of Hydrogen on the Mechanical Properties of FeTi for Hydrogen Storage Applications, Int. J. Hydrogen Energy, vol. 39, pp. 12667-12675, 2014.
-
Brenier, R., Thevenard, P., Capra, T., Perez, A., Treilleux, M., Romana, L., Dupuy, J., and Brunel, M., Amorphous Alloy Formation by Ion Beam Mixing of Iron-Titanium Multilayers, Nucl. Instrum. Methods Phys. Res., vols. B19-20, pp. 691-695, 1987.
-
Checchetto, R., Bazzanella, N., Miotello, A., and Principi, G., Deuterium Thermal Desorption from FeTi Thin Films, J. Alloys Compd., vols. 356-357, pp. 521-525, 2003.
-
Cherenda, N.N., Uglov, V.V., Poluyanova, M.G., Astashynski, V.M., Kuzmitski, A.M., Pogrebnjak, A.D., and Stritzker, B., The Influence of the Coating Thickness on the Phase and Element Composition of A "Ti Coating/Steel" System Surface Layer Treated by a Compression Plasma Flow, Plasma Processes Polym., vol. 6, pp. S178-S182, 2009.
-
Cherenda, N.N., Malashevich, A.A., Uglov, V. V., Astashynski, V.M., and Kuzmitski, A.M., The Structure and Phase Composition of the U9 Steel Surface Layer Alloyed with Chromium Atoms under the Action of Compression Plasma Flow, J. Belarus. State Univ. Phys., vol. 2, pp. 102-107, 2017 (in Russian).
-
Cherenda, N.N., Nichipor, V.Yu., Astashynski, V.M., and Kuzmitski, A.M., Oxidation Resistance of Steel Surface Layer Alloyed by Mo and Cr under the Action of Compression Plasma Flows, High Temp. Mater. Processes, vol. 23, no 3, pp. 209-219, 2019.
-
Dong, Z.H., Liu, C., Han, X.G., and Lei, M.K., Induced Stress Wave on the Materials Surface Irradiated by High-Intensity Pulsed Ion Beam, Surf. Coat. Technol., vol. 201, pp. 5054-5058, 2007.
-
Grigoriev, I.S., Ed., Phizicheskie velichiny: Spravochnik (Physical values: Handbook), Energoatomizdat, Moscow, 1991 (in Russian).
-
Kumar, S., Tiwari, G.P., Sonak, S., Jain, U., and Krishnamurthy, N., High Performance FeTi - 3.1 Mass % V Alloy for On Board Hydrogen Storage Solution, Energy, vol. 75, pp. 520-524, 2014.
-
Le, X.Y., Zhao, W.J., Yan, S., Han, B.X., and Xiang, W., The Thermodynamical Process in Metal Surface Due to the Irradiation of Intense Pulsed Ion Beam, Surf. Coat. Technol., vols. 158-159, pp. 14-20, 2002.
-
Leyvi, A.Ya., Cherenda, N.N., Uglov, V.V., and Yalovets, A.P., The Impact of a Shock-Compressed Layer on the Mass Transfer of Target Material during Processing Compression Plasma Flows, Resour.-Effic. Technol., vol. 3, pp. 222-225, 2017.
-
Matsushita, M., Tajima, I., Abe, M., and Tokuyama, H., Experimental Study of Porosity and Effective Thermal Conductivity in Packed Bed of Nanostructured FeTi for Usage in Hydrogen Storage Tanks, Int. J. Hydrogen Energy, vol. 44, pp. 23239-23248, 2019.
-
Nong, Z., Zhu, J., Yang, X., Cao, Y., Lai, Z., and Liu, Y., First-Principles Study of Hydrogen Storage and Diffusion in B2 FeTi Alloy, Comput. Mater. Sci., vol. 81, pp. 517-523, 2014.
-
Novakova, A.A., Agladze, O.V., Sveshnikov, S.V., and Tarasov, B.P., Supersaturated Solid Solutions and Metastable Phases Formation through Different Stages of Mechanical Alloying of FeTi, Nanostruct. Mater., vol. 10, no 3, pp. 365-374, 1998.
-
Rajput, P., Gupta, A., and Avasthi, D.K., Swift Heavy Ion Induced Modification in Fe/Ti System Studied Using X-Ray Waveguide Structure, Nucl. Instrum. Methods Phys. Res., vol. B266, pp. 1680-1684, 2008.
-
Tajima, I., Abe, M., Uchida, H., Hattori, M., Miyamoto, Y., and Haraki, T., Hydrogen Sorption Kinetics of FeTi Alloy with Nano-Structured Surface Layers, J. Alloys Compd., vol. 580, pp. S33-S35, 2013.
-
Val'chuk, V. V., Khalikov, S.V., and Yalovets, A.P., Modeling the Effect of Intense Charged Particle Fluxes on Layered Targets,Math. Modell., vol. 4, no 10, pp. 111-123, 1992 (in Russian).
-
Volkov, N.B., Leivi, A.Ya., Talala, K.A., and Yalovets, A.P., Thermocapillary Convection in a Target Irradiated by an Intense Charged Particle Beam, Tech. Phys., vol. 55, pp. 484-490, 2010.
-
Yalovets, A.P. and Mayer, A.E., Software Package BETAIN (BEAM TARGET INTERACTION), Proceedings of the 6th Int. Conf. on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, Russia, pp. 297-299, 2002.
-
Yan, S., Le, X.Y., Zhao, W.J., Shang, Y. J., Wang, Y., and Xue, J., Study of Metal Film/Substrate Mixing by Intense Pulsed Ion Beam, Surf. Coat. Technol., vol. 201, pp. 4817-4821, 2007.
-
Zhang, J., Yu, X., Zhong, H., Wei, B., Qu, M., Shen, J., Zhang, Y., Yan, S., Zhang, G., Zhang, X., and Le, X., The Ablation Mass of Metals by Intense Pulsed Ion Beam Irradiation, Nucl. Instrum. Methods Phys. Res, vol. B365, pp. 210-213, 2015.
-
Zhang, Q., Zhu, X.P., Zhang, C.C., and Lei, M.K., Comprehensive Material Constraints Incorporation in Coupled Thermal-Mechanical Responses Modelling for High-Intensity Pulsed Ion Beam Processing of Metals, Nucl. Instrum. Methods Phys. Res., vol. B461, pp. 283-291, 2019.
-
Zhou, S., Xu, Y., Liao, B., Sun, Y., Dai, X., and Pan, H., In-Situ Synthesis of Ti-Fe-Based Alloys Prepared by the Combination of Mechanical Alloying and Laser Melting Deposition: Microstructure and Corrosion Resistance, J. Alloys Compd., vol. 768, no. 5, pp. 697-706, 2018.