High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
年間 4 号発行
ISSN 印刷: 1093-3611
ISSN オンライン: 1940-4360
IF:
0.4
Immediacy Index:
0.1
Eigenfactor:
0.00005
JCI:
0.07
SJR:
0.198
SNIP:
0.48
CiteScore™::
1.1
H-Index:
20
Indexed in
THERMOPHYSICAL CONDITIONS OF CARBON NANOMATERIAL FORMATION DURING DECOMPOSITION OF METHANE IN A HIGH-VOLTAGE ATMOSPHERIC PRESSURE DISCHARGE PLASMA
巻 22,
発行 4, 2018,
pp. 293-313
DOI: 10.1615/HighTempMatProc.2018029271
要約
This paper contains the results of an experimental study and modeling of physicochemical processes of decomposition of a mixture of methane with air in a high-voltage atmospheric pressure discharge plasma. The equilibrium conditions for mixture conversion have been considered, the time of its residence in the reaction zone has been estimated, and the compositions of the conversion products have been given depending on the equivalent ratio φ. On the basis of the conducted research, conclusions have been drawn as to the influence of the thermal conditions of the process on the formation of a carbon nanomaterial.
957 記事の閲覧数
9 記事のダウンロード
記事の統計
類似内容の記事:
最新号
DETERMINATION OF THE MASS BALANCE OF HIGH-CARBON FERROCHROME IN A SUBMERGED ARC FURNACE
RHEOLOGICAL BEHAVIOR AND 3D PRINTING OF HIGHLY FILLED ALUMINA-POLYAMIDE FILAMENTS DURING FUSED DEPOSITION MODELING
SCRATCH TESTING OF ZrN COATING ON TI-6AL-4V TITANIUM ALLOY SURFACE PRELIMINARY TREATED BY COMPRESSION PLASMA FLOWS IMPACT
ELECTRON-BEAM SINTERING OF ZIRCONIUM DIOXIDE/TITANIUM CERAMICS FOR MICROELECTRONICS PRODUCTS
THE EFFECT OF THE FLUORINE CONCENTRATION IN A PLASMA-FORMING GAS MIXTURE ON THE CHEMICAL COMPOSITION, SURFACE CHARGE, AND RELIEF PARAMETERS OF FLUOROCARBON COATINGS ON PET
PREPARATION AND THERMOELECTRIC PROPERTIES OF p-TYPE Ag(1-x)Cu(1+x)Te SAMPLES BY SPARK PLASMA SINTERING METHOD
近刊の記事
THE QUALITY OF THIN-WALLED STRUCTURES OF AlSi10Mg PRODUCED BY SELECTIVE LASER MELTING
PHYSICAL AND MECHANICAL PROPERTIES AND OPERATIONAL CHARACTERISTICS OF CORONA SPRAYED POWDER COATINGS
Increasing the wear resistance of titanium alloys by deposition of a modifying coating (Zr,Nb)N
Electron-beam synthesis of zirconia ceramic coatings in the forevacuum pressure range
Preparation and Thermoelectric Properties of P-type Ag(1-x)Cu(1+x)Te Samples by SPS Method
The effect of the fluorine concentration in a plasma-forming gas mixture on the chemical composition, surface charge and relief parameters of fluorocarbon coatings on PET
Electron beam sintering of zirconium dioxide/titanium ceramics for microelectronics products