High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
Publicou 4 edições por ano
ISSN Imprimir: 1093-3611
ISSN On-line: 1940-4360
IF:
0.4
Immediacy Index:
0.1
Eigenfactor:
0.00005
JCI:
0.07
SJR:
0.198
SNIP:
0.48
CiteScore™::
1.1
H-Index:
20
Indexed in
Volume 27, 2023 Edição 2
DOI: 10.1615/HighTempMatProc.v27.i2
A SIMPLE STUDY OF JOULE HEATING EFFECT IN ARGON DBD REACTOR
pp. 1-9
DOI: 10.1615/HighTempMatProc.2022045178
ELECTRON-ION-PLASMA SYNTHESIS OF MULTILAYER CR−B FILMS
pp. 11-18
DOI: 10.1615/HighTempMatProc.2022045224
THE INFLUENCE OF PLASMA ASSISTANCE MODES ON CHARACTERISTICS AND COMPOSITION OF PVD ZIRCONIUM NITRIDE COATINGS
pp. 19-31
DOI: 10.1615/HighTempMatProc.2022045185
INFLUENCES OF TEMPORAL AND SPATIAL DISTRIBUTION OF LASER RADIATION HEAT ON THE CRACK PROPAGATION FOR CUTTING HIGH THICK MATERIALS
pp. 33-49
DOI: 10.1615/HighTempMatProc.2022044222
DC PLANAR MAGNETRON SPUTTER DEPOSITION OF BORON THIN FILMS AND THEIR PROPERTIES
pp. 51-56
DOI: 10.1615/HighTempMatProc.2022045676
SOLAR TECHNOLOGY FOR METALLURGICAL WASTE PROCESSING
pp. 57-63
DOI: 10.1615/HighTempMatProc.2022045801
ANALYSIS OF FORMATION AND COMPOSITION OF BORON-BASED PROTECTIVE COATINGS OBTAINED BY ELECTRON-BEAM DEPOSITION AT FORE-VACUUM PRESSURES
pp. 65-73
DOI: 10.1615/HighTempMatProc.2022046759
EQUIVALENT FATIGUE OF CRANKSHAFT STRUCTURE BASED ON RESIDUAL STRESS FIELD AND ITCD APPROACH
pp. 75-93
DOI: 10.1615/HighTempMatProc.2022045678
Última edição
DETERMINATION OF THE MASS BALANCE OF HIGH-CARBON FERROCHROME IN A SUBMERGED ARC FURNACE
RHEOLOGICAL BEHAVIOR AND 3D PRINTING OF HIGHLY FILLED ALUMINA-POLYAMIDE FILAMENTS DURING FUSED DEPOSITION MODELING
SCRATCH TESTING OF ZrN COATING ON TI-6AL-4V TITANIUM ALLOY SURFACE PRELIMINARY TREATED BY COMPRESSION PLASMA FLOWS IMPACT
ELECTRON-BEAM SINTERING OF ZIRCONIUM DIOXIDE/TITANIUM CERAMICS FOR MICROELECTRONICS PRODUCTS
THE EFFECT OF THE FLUORINE CONCENTRATION IN A PLASMA-FORMING GAS MIXTURE ON THE CHEMICAL COMPOSITION, SURFACE CHARGE, AND RELIEF PARAMETERS OF FLUOROCARBON COATINGS ON PET
PREPARATION AND THERMOELECTRIC PROPERTIES OF p-TYPE Ag(1-x)Cu(1+x)Te SAMPLES BY SPARK PLASMA SINTERING METHOD
ELECTRON-BEAM SYNTHESIS OF ZIRCONIA CERAMIC COATINGS IN THE FOREVACUUM PRESSURE RANGE
INCREASING THE WEAR RESISTANCE OF TITANIUM ALLOYS BY DEPOSITION OF A MODIFYING COATING (Zr,Nb)N
PHYSICAL AND MECHANICAL PROPERTIES AND OPERATIONAL CHARACTERISTICS OF CORONA SPRAYED POWDER COATINGS
Próximos artigos
Application of a non-self-sustained glow discharge initiated by a focused electron beam in the forevacuum pressure region for nitriding the inner surface of narrow metal tubes
PLASMA DISCHARGE IN LIQUID MEDIA UNDER THE EFFECT OF ULTRASOUND FOR THE SYNTHESIS OF FILLERS FOR POLYMER COMPOSITES WITH ENHANCED MECHANICAL STRENGTH AND GAS PERMEABILITY
THE QUALITY OF THIN-WALLED STRUCTURES OF AlSi10Mg PRODUCED BY SELECTIVE LASER MELTING
Electron-beam synthesis of zirconia ceramic coatings in the forevacuum pressure range
Preparation and Thermoelectric Properties of P-type Ag(1-x)Cu(1+x)Te Samples by SPS Method
The effect of the fluorine concentration in a plasma-forming gas mixture on the chemical composition, surface charge and relief parameters of fluorocarbon coatings on PET
Electron beam sintering of zirconium dioxide/titanium ceramics for microelectronics products