Выходит 8 номеров в год
ISSN Печать: 1065-5131
ISSN Онлайн: 1563-5074
Indexed in
An Experimental Investigation of the Performance of Cross-Corrugated Plate Heat Exchangers
Краткое описание
Two important variables in plate heat exchanger design are the size (i.e., height H and pitch P) and the orientation (b) of the corrugation embossed on the plates. In this article, the effects of b on the thermal performance of and pressure loss in such an exchanger are investigated through laboratory experimentation for a single-phase application using water. Two rectangular test heat exchangers made from corrugated plates (P = 25 mm and H = 5.5 mm) with b = 45° and 60° were tested. The results showed that the Nusselt number (Nu) and the Darcy friction factor (f) for the 60° channel were higher compared to the 45° sample by a factor of 1.5–2 in the Reynolds (Re) number range 300 < Re < 1700. However, in comparison with a flat plate channel, this factor at Re @ 1000 was of the order of 5 for Nu and as high as 30 for f. Also, the data showed a transitory behavior in the range Re @ 450–900 and 600–1300 for the 60° and 45° samples, respectively. The experimental results are compared with published data from the open literature. While good agreement was found with some studies, a large discrepancy with other experimental data was revealed. This discrepancy is explained by either geometric parameters and/or the experimental techniques used. Also, included in the article is a description of the flow pattern in cross-corrugated cavities and its relation to the plate’s surface temperature. It is shown that even at very low flow rates, the fluid movement is generally erratic and random, generating a fully mixed flow in the heat exchanger.
-
Zhang Lei, Che Defu, Influence of Corrugation Profile on the Thermalhydraulic Performance of Cross-Corrugated Plates, Numerical Heat Transfer, Part A: Applications, 59, 4, 2011. Crossref
-
Khan T.S., Khan M.S., Chyu Ming-C., Ayub Z.H., Experimental investigation of single phase convective heat transfer coefficient in a corrugated plate heat exchanger for multiple plate configurations, Applied Thermal Engineering, 30, 8-9, 2010. Crossref
-
Zhang Guan-min, Tian Mao-cheng, Zhou Shou-jun, Simulation and Analysis of Flow Pattern in Cross-Corrugated Plate Heat Exchangers, Journal of Hydrodynamics, 18, 5, 2006. Crossref
-
Wang Limin, Deng Lei, Zhao Zhenxing, Zhu Xin, Che Defu, Numerical Investigation of the Thermohydraulic Performance of Double-Wave Cross-Corrugated Passages, Numerical Heat Transfer, Part A: Applications, 67, 10, 2015. Crossref
-
Khan Tariq S., Khan Mohammad S., Ayub Zahid H., Single-Phase Flow Pressure Drop Analysis in a Plate Heat Exchanger, Heat Transfer Engineering, 38, 2, 2017. Crossref
-
Zhang Ji, Zhu Xiaowei, Mondejar Maria E., Haglind Fredrik, A review of heat transfer enhancement techniques in plate heat exchangers, Renewable and Sustainable Energy Reviews, 101, 2019. Crossref
-
Khan Tariq S., Khan Mohammad S., Ayub Zahid H., Experimental Investigation of Single-Phase Heat Transfer in a Plate Heat Exchanger, Journal of Thermal Science and Engineering Applications, 7, 4, 2015. Crossref
-
Yang Jie, Jacobi Anthony, Liu Wei, Heat transfer correlations for single-phase flow in plate heat exchangers based on experimental data, Applied Thermal Engineering, 113, 2017. Crossref
-
Mutumba Angela, Coletti Francesco, Reip Alex, Mahmoud Mohamed M., Karayiannis Tassos G., Experiments and Correlations for Single-Phase Convective Heat Transfer in Brazed Plate Heat Exchangers, Heat Transfer Engineering, 2022. Crossref