Выходит 12 номеров в год
ISSN Печать: 1044-5110
ISSN Онлайн: 1936-2684
Indexed in
STATE OF THE ART REVIEW OF FLASH-BOILING ATOMIZATION
Краткое описание
Flash boiling atomization is now a widespread practice for creating fine sprays. The present paper aims to review and analyze our current knowledge on flash atomization processes and applications. First, the fundamental physical processes of flash-boiling atomization, i.e., nucleation and bubble growth. Then, their role in creating optimal spray (small droplet diameters and short breakup length) is analyzed. Special attention is given to reviewing and comparing different transition criteria. The conclusions can be used by those who aim to avoid accidental scenarios, or, to minimize hazardous scenarios. New surfaces are created thanks to boiling (or cavitation). The relative magnitude of the new surfaces increases as the bubbles grow, and once the two-phase fluid discharges, due to the relative kinetic energies of the liquid and the gas. Better jet atomization is observed when flashing occurs within the aperture. Higher superheat degrees lead to finer spray; thereby homogeneous nucleation should be aspired to when designing an optimal injector. Twin orifice injector with an expansion chamber is preferable for multi-component liquid, especially since it enables ones to achieve the desired sprays for lower pressures and superheat degrees. While in a single orifice injector, the highest superheat degree should be aspired to, the desired superheat degree has an upper limit for injectors with an expansion chamber. Too high superheat degrees can lead to extensive bubble coalescence and to flow stratification, thereby damaging the spray quality. The optimal degree is the one that will lead to high nucleation rate, accompanied with the highest slip between the phases. There is a lack in data of depressurization rates and their relation to spray characteristics for different liquids. In addition, experiments and data are lacking with regard to multi-component liquids.
-
Liao Yixiang, Lucas Dirk, Computational modelling of flash boiling flows: A literature survey, International Journal of Heat and Mass Transfer, 111, 2017. Crossref
-
Zhou Zhi-Fu, Lu Guan-Yu, Chen Bin, Numerical study on the spray and thermal characteristics of R404A flashing spray using OpenFOAM, International Journal of Heat and Mass Transfer, 117, 2018. Crossref
-
Khan Muhammad Mahabat, Sheikh Nadeem Ahmed, Khalid Azfar, Lughmani Waqas Akbar, Experimental characterization of gasoline sprays under highly evaporating conditions, Heat and Mass Transfer, 54, 5, 2018. Crossref
-
Jeon Jeeyeon, Moon Seoksu, Sato Kiyotaka, Nagasawa Takeshi, Near-nozzle spray dynamics of 6-hole GDI injector under subcooled and superheated conditions, Fuel, 232, 2018. Crossref
-
Guo Hengjie, Wang Bo, Li Yanfei, Xu Hongming, Wu Zhijun, Characterizing external flashing jet from single-hole GDI injector, International Journal of Heat and Mass Transfer, 121, 2018. Crossref
-
Ji Can, Cheng Lin, Wang Naihua, Liu Zhigang, Experimental investigation on high-pressure high-temperature spray flash evaporation and the characteristic Jakob number, Experimental Thermal and Fluid Science, 102, 2019. Crossref
-
Li Yanfei, Guo Hengjie, Zhou Zhifu, Zhang Zhou, Ma Xiao, Chen Longfei, Spray morphology transformation of propane, n-hexane and iso-octane under flash-boiling conditions, Fuel, 236, 2019. Crossref
-
Zhang Zhou, Li Yanfei, Ma Xiao, Ding Haichun, Xu Hongming, Wang Zhi, Shuai Shijin, Characteristics of trans-critical propane spray discharged from multi-hole GDI injector, Experimental Thermal and Fluid Science, 99, 2018. Crossref
-
Zhou Zhi-Fu, Hu Meng-Yuan, Xin Hui, Chen Bin, Wang Guo-Xiang, Experimental and theoretical studies on the droplet temperature behavior of R407C two-phase flashing spray, International Journal of Heat and Mass Transfer, 136, 2019. Crossref
-
Dietzel D., Hitz T., Munz C.-D., Kronenburg A., Single vapour bubble growth under flash boiling conditions using a modified HLLC Riemann solver, International Journal of Multiphase Flow, 116, 2019. Crossref
-
Moshkovich Yahav, Levy Yeshayahou, Sher Eran, Theoretical criteria for homogeneous flash boiling atomization, Chemical Engineering Science, 206, 2019. Crossref
-
Zhu Xueliang, Song Zeyang, Pan Xuhai, Mei Yu, Wang Xilin, Zhu Yucheng, Jiang Juncheng, Morphological characteristics of flashing jet throughout superheated liquid release, Journal of Loss Prevention in the Process Industries, 66, 2020. Crossref
-
Moshkovich Y., Levy Y., Sher E., Experimental observations of the transition between heterogeneous to homogeneous nucleation regimes in flash-boiling atomization, International Journal of Multiphase Flow, 134, 2021. Crossref
-
Loureiro D. D., Reutzsch J., Kronenburg A., Weigand B., Vogiatzaki K., Primary breakup regimes for cryogenic flash atomization, International Journal of Multiphase Flow, 132, 2020. Crossref
-
Zhu Yucheng, Zhu Xueliang, Song Zeyang, Pan Xuhai, Wang Xilin, Mei Yu, Hua Min, Jiang Juncheng, Droplets behaviors of flashing jet in accidental release of superheated liquid, Journal of Loss Prevention in the Process Industries, 68, 2020. Crossref
-
Bar-Kohany Tali, Minimal heating rate for isobaric nucleation at the spinodal in liquids, International Journal of Heat and Mass Transfer, 165, 2021. Crossref
-
Yin Zhiyao, Kutne Peter, Eichhorn Jochen, Meier Wolfgang, Experimental Investigations of Superheated and Supercritical Injections of Liquid Fuels, Journal of Engineering for Gas Turbines and Power, 143, 4, 2021. Crossref
-
Pelé Ronan, Mounaïm-Rousselle Christine, Bréquigny Pierre, Hespel Camille, Bellettre Jérôme, First Study on Ammonia Spray Characteristics with a Current GDI Engine Injector, Fuels, 2, 3, 2021. Crossref
-
Shariatnia Shadi, Asadi Amir, Jarrahbashi Dorrin, Experimental analysis of supercritical-assisted atomization, Physics of Fluids, 33, 1, 2021. Crossref
-
Czernek Krystian, Hyrycz Michał, Krupińska Andżelika, Matuszak Magdalena, Ochowiak Marek, Witczak Stanisław, Włodarczak Sylwia, State-of-the-Art Review of Effervescent-Swirl Atomizers, Energies, 14, 10, 2021. Crossref
-
Avedisian C. Thomas, Skyllingstad Kyle, Cavicchi Richard C., Lippe Corinne, Carrier Michael J., Initiation of Flash Boiling of Multicomponent Miscible Mixtures with Application to Transportation Fuels and Their Surrogates, Energy & Fuels, 32, 9, 2018. Crossref
-
Miao Junjie, Fan Yuxin, Wu Weiqiu, Effects of nozzle configuration on flash boiling fuel sprays of twin-orifice nozzle with aviation kerosene, International Journal of Heat and Mass Transfer, 174, 2021. Crossref
-
Loureiro D.D., Kronenburg A., Reutzsch J., Weigand B., Vogiatzaki K., Droplet size distributions in cryogenic flash atomization, International Journal of Multiphase Flow, 142, 2021. Crossref
-
Krupińska Andżelika, Ochowiak Marek, Janecki Daniel, Włodarczak Sylwia, Matuszak Magdalena, Numerical Simulation as a Tool for Design Optimization of Two-Phase Swirl Flow Atomizers, in Advances in Design, Simulation and Manufacturing IV, 2021. Crossref
-
Li Shiyan, Li Tie, Wang Ning, Zhou Xinyi, Chen Run, Yi Ping, An investigation on near-field and far-field characteristics of superheated ammonia spray, Fuel, 324, 2022. Crossref
-
Tang Hao, Pan Xuhai, Mei Yu, Wang Xilin, Zhu Xueliang, Jiang Juncheng, Morphological characteristics and flashing mechanism of superheated liquid jets released from rectangular breaches, Journal of Loss Prevention in the Process Industries, 79, 2022. Crossref